Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Plastic buckling"”.
-
Plastic buckling of Mindlin plates
This thesis is concerned with the plastic bifurcation buckling of thick plates of arbitrary shapes that are defined by polynomial functions. The plates may be subjected to in-plane normal and/or shear stresses and the edges may take on any combination of boundary conditions. The effect of …
-
Flexural-Torsional Elasto-Plastic Buckling in Flat Stiffened Plating
Abstract Not Provided.
-
Plastic buckling and collapse of circular cylinders under axial compression
This study is concerned with the plastic buckling of relatively thick tubes and the ensuing succession of instabilities leading to their failure. The first instability is uniform axisymmetric wrinkling that is treated as a plastic bifurcation. As the wrinkles grow, the axial rigidity of the shell …
-
Plastic buckling of plates including edge contact-frictional force effects.
… on the distribution of stress state prior to buckling of plates are investigated. A contact-friction interface element is included in the pre-buckling analysis which considers the possibility of slip between the machine heads and the plate. All analyses are performed using the incremental …
-
Plastic buckling of circular tubes under combined internal pressure and axial compression
This thesis deals with the problem of plastic buckling and collapse of moderately thin-walled tubes under combined internal pressure and axial compression. The problem is investigated through a combination of experiments and analysis. Experiments were conducted on stainless steel tubes with D/t …
-
Plastic sheer buckling of ship hull plating induced by grounding
… to in-plane shear loads in both the elastic and plastic buckling ranges. Seven plate buckling experiments were then conducted which were used to validate the analytical model results. Finally, the plate element model was incorporated into a global model description for the bottom plating of a …
-
On the Fabrication, Characterization and Mechanical Properties of Melt-stretched Stochastic Honeycombs
… honeycombs were shown to buckle elastically, plastically, and fracture after the peak strength. Elastic and plastic buckling were dominant at lower densities, and plastic buckling and fracture at higher densities. A thin-plate buckling model for the strength of stochastic honeycombs was …
-
Dimensionamento via método da resistência direts de colunas em aço inoxidável de parede fina sob falha distorcional
… numerical-computational study of the structural buckling and post-buckling (elastic and elastic-plastic) behavior of Cold Formed Steel (CFS) lipped-channel columns with austenitic (304) and ferritic (430) steels buckling and failing in distortional mode. This analysis aims to evaluate the current …
-
The ultimate load capacity of square shear plates with circular perforations : (parameter study)
… determining the ultimate in-plane capacities and buckling capacities of perforated shear plates. The parameters investigated during this study were the hole size for a concentric location, and the hole location for a constant ratio of hole diameter to plate width of 0.2. In addition various …
-
Dimensionamento à flambagem distorcional via MRD de colunas metálicas perfuradas em perfil rack
… load and the lengths in which the distortional buckling occurs, employing for this purpose computational numerical analyzes via MEF. These sections are widely used in industrial storage systems, known as pallet carriers, and also have drills, which influence the resistance and dimensioning. …
-
Failure of steel gusset plates
… variables tested. Some methods do not consider buckling and most of those that do are inadequate. Most of the methods do not accurately take account of the load position. An alternative method based on experimental observations is presented for design purposes. The method covers any combination …
-
Stability analysis of light gauge steel members using the finite element method and the generalized beam theory
… the facilities of elastic spring restraints, buckling under coupled loads, different load locations has been developed and programmed by the author. It has been applied to reveal the basic behaviour and the interaction between the modes of light gauge steel members. It has been found that the …
-
Elastoplastic Buckling of Functionally Graded Beams using Tamura-Tomota-Ozawa and Ramberg-Osgood Material Models
… of material properties spatially. While buckling of slender Functionally Graded Beams (FGBs) can be analyzed using linear eigenvalue analysis and is well documented, the buckling response of FGBs with low and medium slenderness ratios is under-researched. This behavior is highly complex …
-
The Seismic Response Of Buried Gas Pipelines In Inhomogeneous Soil
… conditions can lead to failure, particularly buckling, and characterize those failure mechanisms.<br/>The dynamic soil-pipe interaction problem was approached numerically and experimentally. A rigorous yet efficient two-step numerical methodology involving a global and a local model was …
-
On the Cutting of Metals at the Small Scale: Size Effect, Friction and Plastic Instabilities
… interpreted and quantitatively modeled using a plastic sliding contact mechanics model in which the increased role of the intermolecular adhesion at small tool-chip contacts is shown to be the primary factor underlying the non-linear scaling of the contact length and the size effect. Cutting …
-
Experimental observations and simulations of the mechanical deformation of amorphous metallic foam
… fracture. Contrary to other reports that suggest plastic buckling in a single narrow crushing band, the majority of the strain the 49% porous sample experiences is from a percolating diffuse brittle crushing along shear bands of the sample. Reports of highly porous samples show a more ductile …
-
Structural Optimization of Thin Walled Tubular Structure for Crashworthiness
… three modes of deformation: progressive crushing/buckling, dynamic plastic buckling, and global bending or Euler-type buckling. Of these, progressive buckling is the most desirable mode of collapse because it leads to a desirable deformation characteristic, low peak reaction force, and higher …
-
An investigation of residual stresses in tubing
… occur in drawn tubing, possibly associated with plastic bending at entry or exit from the drawing die. The present work was carried out to determine whether circumferential variations of residual stress existed in drawn tubing, to establish the effect of eccentricity on the determination of …
-
On the liner wrinkling and collapse of bi-material pipe under bending and axial compression
… expansion. In applications involving severe plastic loading, such as the reeling pipeline installation method, the liner can detach from the outer pipe and develop large amplitude buckles that compromise the flow. This work examines the mechanics of wrinkling and collapse of such a liner …
-
Buckling of rectangular plates under intermediate and end loads
This thesis is concerned with the new buckling problem of rectangular plates subjected to intermediate and end uniaxial loads. The considered plate has two opposite simply supported edges that are parallel to the load direction and the other remaining edges may take any combination of free, simply …
Page 1 of 2