Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 9 of 9 for “"Plastic flow rule"”.
-
Experimentally based mechanical model of sandwich pipes with a strain-hardening cementitious composite core
… which mainly consists of the concrete damage plasticity (CDP) model for the SHCC core and the actual interlayer behavior model. The thesis proposes a particular CDP model for the SHCC core based both on experimental data and on the continuum damage mechanics (CDM) theory. The fundamentals of …
-
Συμβολή στην στατική και δυναμική εγκάρσια απόκριση πασσάλων θεμελιώσεως
… loading Q and overturning moment M and the plastic flow rule are developed. These analytical expressions are validated both numerically with simplified and advanced models and with experiments. The dissertation focuses on understanding the influence of key elements to the pile-soil …
-
Elastic and Plastic Stresses in a Porous Medium Containing Spherical or Cylindrical Cavities
The influence of pore fluid flow on the elastic and plastic stresses in a porous material may be determined for a solid body containing a large spherical or cylindrical cavity. A description of the stresses in porous media relies on a separation of the total stress into effective and neutral parts. …
-
Wave induced response of sea floor deposits : a simple model for sands and nonlinear analysis by FEM
… model is proposed based on the generalized plasticity-bounding surface formulation. Some comparisons of the model tests with experimental results are made. The simple model is capable of simulating both loose and dense sand behavior under monotonic and cyclic loading, drained and undrained …
-
Separated Double Chord RHS Joints
… the Von Mises yield criterion and the associated plastic flow rule. While geometric nonlinearities have been excluded, this was deemed reasonable for the range of displacements considered in this study.</p> <p>To verify the finite element model, a number of experiments were conducted on twin shear …
-
Effect of pore water chemistry on the hydro-mechanical behavior of poorly indurated Boom Clay (C-H-M coupling)
… The starting point was the ACC-2 elasto-plastic model, initially formulated under in-situ pore water conditions (Ionic Strength = 0.015 M), by introducing a cohesion parameter into both the yield surface and the plastic flow rule to better represent the mechanical response of Boom Clay. …
-
Development and calibration of constitutive model for sand
… model for sand is developed as an alternative plasticity formulation that exhibits critical state consistency for both monotonic and cyclic loading and uniqueness of its parameters for a given type of sand, irrespective of loading conditions. The model, designated as Ta-Ger sand model …
-
Plasticity Based Formulations for Pressure Sensitive Materials
… under high confinement. The multi-surface damage plasticity model combines the hyperbolic Drucker-Prager formulation in shear and tension regime and the modified cam-clay yield functions in the cap of the triaxial compression. The post yield behavior and the damage evolution of concrete are …
-
Ανάλυση και σχεδιασμός συστημάτων θεμελιώσεων−ανωδομής έναντι μεγάλων εδαφικών μετακινήσεων
Large caissons are often employed as foundations for long bridges spanning over land or water. Owing to their massive dimensions, they constitute the technically feasible solution when the foundation soil has inadequate bearing capacity to support the superstructure on a shallow or piled …