Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 99 for “"Plastic hinges"”.
-
Post-Earthquake Residual Capacity of Reinforced Concrete Plastic Hinges
… and Kaikoura earthquakes in New Zealand, forming plastic hinges in intended locations. While this meant that life-safety performance objectives were met, widespread demolition and heavy economic losses took place in the aftermath of the earthquakes.The Christchurch central business district was …
-
Experimental and Analytical Seismic Studies of a Four-Span Bridge System with Innovative Materials
… model of a four-span bridge incorporating plastic hinges with different advanced materials was tested to failure on the three shake table system at the University of Nevada, Reno (UNR). The bridge was the second test model in a series of three 4-span bridges, with the first model being a …
-
Redistribuição de momentos fletores em estruturas hiperestáticas
… and experimental work on the application of plastic analysis to statically indeterminate reinforced concrete structures are presented herein. Fourteen two-span contiuos beams were tested to failure. These beams were dimensioned according to bending moment diagrams differing in 15% and 25% …
-
The Effects of Steel Fibers on the Plastic Rotation Capacity and Properties of Reinforced Concrete Continuous Beams
… deal of inelastic rotation at the so-called "plastic-hinges" where the highest moment is applied. This occurs because of the strain-hardening effect of steel that takes place long after the yield strength of steel is reached. There is a very important difference in the plastic design of steel …
-
Inapplicability of limit design to structures made of some high strength aluminium alloys.
… hardening which is essential to the formation of plastic hinges in the beam, but some aluminum alloys which have little strain hardening may not be suitable for limit design. Two beam tests were carried out on a twice statically indeterminate beam made of Alcan 65S-T6 aluminum alloy to determine …
-
Seismic analysis and evaluation of a building retrofitted with new RC walls
… relations and rotation limits for the plastic hinges of flexure-dominated walls. The results of the truss models were used to adjust the calibration of hinge models for each of the wall components. A three-dimensional nonlinear model of the entire building was developed employing …
-
Non-Contact Lap-Splice Design with Ultra-High-Performance-Concrete for Seismic Buildings
Controlling the location and strength of plastic hinges is crucial for maintaining the integrity of seismic-resistant structures during seismic events. Although advanced materials, new structural systems, and supplemental damping devices have been extensively researched, conventional reinforced …
-
Energy absorption through the lateral collapse of thin-walled single and nested tubes
… Due to strain localisation around the plastic hinges, external constraints were employed to increase the number of plastic hinges and thereby increase the volume of material reaching plasticity. Various indicators that described the effectiveness of an energy absorbing mechanism were …
-
The Development and Use of a Test Facility for Large Diameter Pipes
… at a total applied pressure of 358 kPa, but plastic hinges were seen to have occurred in the vicinity of both haunches. The plastic hinges observed in this experiment could lead to a failure mechanism that is not considered in the existing design models for structures of this type. A series …
-
Limit Design of Unbraced Reinforced Concrete Frames
… the frame stability equation by assuming elasto-plastic moment curvature relationships for members. Also, the stability solution was carried out by reducing the frame to a column attached to a linear spring. In the experimental part, two frames were designed for the same loading conditions but by …
-
Development of Innovative Self-Centering Concrete Beam-Column Connections Reinforced using Shape Memory Alloys
… Shape Memory Alloy (SMA) bars with relocated plastic hinges. The proposed systems utilize the Psuedoelastic (PE) response of SMA in re-centering the connection after being subjected to earthquake-like motion. The behaviours of the systems are investigated experimentally, analytically, and …
-
Three Dimensional Dynamic Response of Reinforced Concrete Bridges Under Spatially Varying Seismic Ground Motions
… response is concentrated at bidirectional plastic hinges located at the pier end zones. The ductility demand at each pier is determined from the bidirectional rotations occurring at the plastic hinges during the seismic response evaluation of the bridge models. Variability of the soil …
-
Dynamic plastic deformation of a free ring subjected to a point load
The permanent deformation of a rigid perfectly-plastic unsupported thin ring subjected to a concentrated time-dependent force acting along a diameter is calculated. The analysis is developed for a force pulse of arbitrary shape, and numerical results are obtained for the special case of a …
-
Analytical investigation of the seismic performance of special truss girder framing systems with new technologies
… in the middle of the truss is the formation of plastic hinges at the four corners of the special segment. This mechanism is proposed to be replaced by the energy dissipation through the deformation of SMAs located in a pin-ended special segment. It is emphasized that in all Thesis analyzes the …
-
Estimating seismic performance of friction damped braced frames by pushover analysis
… story drifts, and identifying locations of most plastic hinges for Moment Resistant Frame (MRF) systems. The principal objective of this investigation is to implement MPA procedure to analyze Friction Damped Braced Frame (FDBF) Systems. The comparisons of the seismic responses of the FDBF …
Page 1 of 5