Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Plastics--Testing."”.
-
Irradiation effects in plastics
Electronic Thesis or Dissertation
-
Evaluation of GFRP framing connections
The objective of this thesis is to verify the assumption of designing the connection as simply supported in a GFRP bonded-bolted framing angle configuration. To achieve this, nine framing angle connection tests were performed. The assumption was found to be valid for the 2 bolt bonded, the 2 bolt …
-
Processibility factors of polyolefins as determined on the Brabender plastograph
… Company, measure the viscosity behavior of plastics under conditions found in production equipment. The Brabender plastograph measures changes in torque, a function of viscosity, which result from chain scission, shear thinning, temperature effect, density change and cross-linking. All of …
-
Design of an Apparatus for Study of Stress Versus Strain as a Function of Strain Rate in Plastics
… at high strain rates using standard equipment. Plastics are often subjected to tensile loads at various rates of loading, such as when they are used to absorb impact.
-
Study of Tensile Stress Versus Strain Characteristics of Vinyl Plastic at Various Temperatures as a Function of Strain Rate
The purpose of this thesis was to study the tensile-stress versus strain characteristics of vinyl plastic at various temperatures as a function of strain rate.
-
A multi-preferred fiber orientation constitutive model for fiber mat reinforced thermoplastics with a random orientation applied to the stamp thermo-hydroforming process
Thesis (Ph. D.)--Michigan State University. Department of Mechanical Engineering, 2003
-
Evaluation of fiber-matrix interfacial shear strength in fiber reinforced plastics
The role of the interphase in fiberglass reinforced composites was studied by a combination of theoretical analysis, mechanical tests, and several high-resolution analytical techniques. The interphase was varied in composition by using epoxy and polyester matrix polymers with and without added …
-
Development and evaluation of 3-D optical sectioning for the investigation of fiber orientation distributions in injection-molded fiber reinforced thermoplastics
Thesis (M.S.)--Michigan State University. Department of Mechanical Engineering, 1994
-
Fracture Toughness Testing of Plastics under Various Environmental Conditions
… of this study is to test the applicability to plastics of a fracture toughness testing tool developed for metals. The intent is to study pre-test conditioning of several plastic materials and the effect of the depth of the razor notch cut in the chevron notched fracture toughness test …
-
Computer simulation of drop weight impact tests on plastic parts or sheeting
<p>The ASTM D3029 drop weight test on plasic parts or sheeting is simulated in this thesis. The simulation is accomplished by using the Bruceton staircase method or the Up-and-Down method and the normal distribution theory. The "Probit" method is also analyzed.</p><p>The simulation programs are …
-
Rheological characterization of unmodified and chemically modified poly (ethylene terephthalate) resins
Intrinsic viscosity (IV) has often been misused for estimating both melt viscosity and elasticity of poly(ethylene terephthalate) (PET). A rheological study was conducted to determine the variations between a virgin unmodified PET and a recycled and chemically modified PET, both having a reported …
-
Characterization of plastic hypodermic needles
… and pails. This thesis presents the design and testing of one type of plastic hypodermic needle. The buckling and penetration characteristics of the needles were modeled and analyzed analytically and by finite element analyses. Experimental penetration tests using steel and plastic hypodermic …
-
Behavior of Reinforced Concrete Beams Retrofitted in Flexure Using CFRP-NSM Technique
A variety of retrofitting methods are used to upgrade existing structures. For example, steel plates and Fiber Reinforced Polymer (FRP) jackets are externally bonded to members to increase their capacity in flexure and shear. However, due to the issue of corrosion these strengthening systems may …
Page 1 of 2