Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 10 of 10 for “"Plate Assembly"”.

  1. Flow-Induced Vibration of Elastically Mounted Cylinder-Plate Assemblies

    … (FIV) of an elastically supported cylinder-plate assembly (viz., a rigid splitter-plate attached to the downstream side of a cylinder) is investigated deeply and systematically in this thesis, using the numerical simulation based on Computational Fluid Dynamics (CFD) and the mathematical …

    waterloo Repository record for Flow-Induced Vibration of Elastically Mounted Cylinder-Plate Assemblies (opens in a new tab)

  2. A Compact, Convective Flow NaK Test Loop for Material Exposure Contained in an Argon Atmosphere

    … 64 weld specimens and a diffusion bonded tube-plate assembly. The NaK loop has a furnace which operates at a 650 degrees Celsius. It contains two independent and by-passable cold traps to maintain low oxygen levels in the NaK. The loop also contains a coil heat exchanger to cool the NaK. The …

    ut-knoxville Repository record for A Compact, Convective Flow NaK Test Loop for Material Exposure Contained in an Argon Atmosphere (opens in a new tab)

  3. Embedded Plate Connection Between Hollow-Core Slabs and Concrete Walls

    … connection that consisted of an embedded steel plate and stud in the hollow-core. The capacity of the plate assembly embedded in a hollow-core slab was established by directly loading the assembly until steel or concrete failure. Proof-of-concept subassembly testing was conducted on hollow-core …

    umn Repository record for Embedded Plate Connection Between Hollow-Core Slabs and Concrete Walls (opens in a new tab)

  4. SLS Production Friction Stir Plugs by Additive Friction Stir Deposition Aluminum 2219

    … resulting from the removal of the weld tool assembly. These holes must subsequently be filled by the use of a separate process. These holes pose a mission-critical engineering challenge in the production of the SLS rocket. The current method for sealing the holes is the Friction Pull Plug …

    alabama Repository record for SLS Production Friction Stir Plugs by Additive Friction Stir Deposition Aluminum 2219 (opens in a new tab)

  5. Investigation of fixation of the disrupted pubic symphysis using multiple prosthetics in cadaveric models

    … in order to determine whether the locking plate was able to limit the motion per force better than the compression plate. The displacement data and the compliance coefficient data provided evidence that the locking plate assembly is more apt to limit motion in the pubic symphysis. The …

    ttu Repository record for Investigation of fixation of the disrupted pubic symphysis using multiple prosthetics in cadaveric models (opens in a new tab)

  6. Effect of Galvanic Corrosion on Crack Propagation of Cold Expanded Holes in AA2024-T3

    … Galvanic corrosion of a steel fastener/aluminum plate assembly will be investigated assuming the presence of cracks in the aluminum plates. The specimens will be prepared to include an open hole with enough distance to allow cold expansion of commercial interest and will contain induced fatigue …

    embry-riddle Repository record for Effect of Galvanic Corrosion on Crack Propagation of Cold Expanded Holes in AA2024-T3 (opens in a new tab)

  7. Phase transformation and growth kinetics in reaction zone between uranium alloy and zirconium diffusion barrier

    … and diffusion kinetics in U-Mo-Zr, U-Zr and fuel plate assembly processed by co-rolling and hot isostatic pressing (HIP) were investigated using a variety of analytical techniques accompanying scanning electron microscopy and transmission electron microscopy. Phase constituents, microstructure and …

    ucf Repository record for Phase transformation and growth kinetics in reaction zone between uranium alloy and zirconium diffusion barrier (opens in a new tab)

  8. The effect of velocity and orientation on the simulation and experimental characterization of an AUV tunnel thruster

    … thrust directly. The AUV was attached to a yaw plate assembly in Memorial University of Newfoundland's tow tank, and several tests were run to characterize the effect of vehicle motion on the transient and steady state thruster performance. This thesis will present and discuss the experimental …

    uvic Repository record for The effect of velocity and orientation on the simulation and experimental characterization of an AUV tunnel thruster (opens in a new tab)

  9. Design for Assembly Methods for Large and Heavy Plates: An experimental Design

    … of advances in industrial automation, manual assembly tasks continue to be an important feature of many industrial operations. In heavy part assembly, some pieces of raw material or equipment are too heavy to be safely handled by an operator. Material handling devices such as Jib cranes or …

    vt Repository record for Design for Assembly Methods for Large and Heavy Plates: An experimental Design (opens in a new tab)

  10. Shielding material selection for the disposal of radioactive waste from 𝟗𝟗𝐌𝐨 production

    … is by the irradiation of fissile target plates in a research reactor. HALEU (High-Assay Low Enrichment Uranium) target plates are irradiated for as long as 200 hours. After discharge and initial cooling, the target plates are dissolved via alkaline digestion. Iodine and molybdenum are …

    nwu-za Repository record for Shielding material selection for the disposal of radioactive waste from 𝟗𝟗𝐌𝐨 production (opens in a new tab)