Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"Plate Vibration"”.

  1. Plate Vibration Dispalcement Curve Measurement Using PVDF

    Beam and plate dynamics are often measured using accelerometers and in some cases laserbased systems. Natural frequencies, mode shapes, and deflections are then derived from these measurements. The work presented here describes a method to directly measure the deflection curve of a vibrating beam …

    nodak Repository record for Plate Vibration Dispalcement Curve Measurement Using PVDF (opens in a new tab)

  2. Vibration Modeling Of Rectangular Plates And Application To Solar Cell Dust Mitigation

    … structures can be modeled as rectangular plates, including solar cells. Carefully controlled plate vibration can be useful to solve an engineering problem, such as lunar dust accumulation on solar cells, which blocks light and reduces power generation. For this application, plate vibration …

    must-thes Repository record for Vibration Modeling Of Rectangular Plates And Application To Solar Cell Dust Mitigation (opens in a new tab)

  3. Attenuation of Turbulent Boundary Layer Induced Interior Noise Using Integrated Smart Foam Elements

    … correlation of turbulent flow and resulting plate vibration, and coherence between plate vibration and the interior noise field. Each study was performed with the goal of improving the performance of active attenuation of turbulent boundary layer induced interior noise. Depending on the …

    vt Repository record for Attenuation of Turbulent Boundary Layer Induced Interior Noise Using Integrated Smart Foam Elements (opens in a new tab)

  4. Free vibration studies of shear deformable plates by the traditional superposition and Superposition-Galerkin method.

    … mode shapes for completely free shear deformable plates, namely, the thick isotropic plates and symmetric cross-ply laminated plates. The effect of transverse shear deformation is taken into account by means of the first order shear deformation relationship as developed by Mindlin. The governing …

    ottawa-retro Repository record for Free vibration studies of shear deformable plates by the traditional superposition and Superposition-Galerkin method. (opens in a new tab)

  5. Active control of sound radiation from fluid loaded plates

    … from an infinite or a finite fluid-loaded plate excited below the critical frequency is analytically studied. The disturbance is caused by a flexural wave in an infinite plate, or by a point force on a finite plate at subsonic frequencies. The wave scattering is caused by discontinuities on …

    vt Repository record for Active control of sound radiation from fluid loaded plates (opens in a new tab)

  6. ΑΝΑΓΝΩΡΙΣΗ ΙΔΙΟΜΟΡΦΩΝ ΤΑΛΑΝΤΟΥΜΕΝΩΝ ΠΛΑΚΩΝ ΑΠΟ ΘΕΡΜΟΚΡΑΣΙΑΚΕΣ ΜΕΤΡΗΣΕΙΣ

    … AND ASSOCIATED ENERGY DISSIPATION IN A VIBRATING PLATE RESULTSIN A TEMPERATURE INCREASE. GIVEN THE HARMONIC MOTION OF THE BOUNDARY, THE STEADY VIBRATION OF PLATES AND THE DAMPING HEAT, GENERATED IS COMPUTED. THEN THE HEAT CONDUCTION EQUATION YIELDS THE TEMPERATURE DISTRIBUTION. THE INVERSE …

    greece Repository record for ΑΝΑΓΝΩΡΙΣΗ ΙΔΙΟΜΟΡΦΩΝ ΤΑΛΑΝΤΟΥΜΕΝΩΝ ΠΛΑΚΩΝ ΑΠΟ ΘΕΡΜΟΚΡΑΣΙΑΚΕΣ ΜΕΤΡΗΣΕΙΣ (opens in a new tab)

  7. Dynamic response of circular plates to transient and harmonic transverse loads including the effect of transverse shear and rotary inertia

    "Using an improved theory of plate vibration suggested by R. D. Mindlin which takes into account the effects of transverse shear and rotary inertia, free and forced transverse vibrations of uniform circular plates are studied and the results compared with those obtained using the classical theory …

    must-thes Repository record for Dynamic response of circular plates to transient and harmonic transverse loads including the effect of transverse shear and rotary inertia (opens in a new tab)

  8. An experimental method for structural intensity and source location

    … function as tools to study vibrating plates. A laser Doppler vibrometer is used in measuring the plate normal velocity for the calculation of the structural intensity and the force distribution function. Several examples show the possibility of locating sources and studying the …

    iastate Repository record for An experimental method for structural intensity and source location (opens in a new tab)

  9. Portable High Throughput Digital Microfluidics and On-Chip Bacteria Cultures

    … EWOD (electrowetting on dielectric) top plate control system is proposed. The dynamic top plate is controlled by a piezoelectric (PZT) cantilever structure. A high resolution laser displacement sensor is used to monitor the deflection of the top plate. The gap height optimization and the …

    unlv Repository record for Portable High Throughput Digital Microfluidics and On-Chip Bacteria Cultures (opens in a new tab) Download PDF for Portable High Throughput Digital Microfluidics and On-Chip Bacteria Cultures (opens in a new tab)

  10. Free vibration analysis of rectangular Mindlin plates resting on uniform elastic edge supports by the superposition method.

    … and mode shapes for rectangular shear deformable plates resting on uniform elastic edge supports. The effect of transverse shear deformation is taken into account by means of the first order shear deformation relationship developed by Mindlin. Uniform elastic rotational and translational supports …

    ottawa-retro Repository record for Free vibration analysis of rectangular Mindlin plates resting on uniform elastic edge supports by the superposition method. (opens in a new tab)

  11. Flaw detection in Multi-layer, Multi-material Composites by Resonance Imaging: utilizing Air-coupled Ultrasonics and Finite Element Modeling

    … a quantitative damage metric. By examining the vibrational behavior of these tiles and the composite lay–up with Finite Element Modeling and analytical plate vibration equations, the development of a new Nondestructive Evaluation technique is possible. This study examines the development of the …

    iastate Repository record for Flaw detection in Multi-layer, Multi-material Composites by Resonance Imaging: utilizing Air-coupled Ultrasonics and Finite Element Modeling (opens in a new tab)

  12. A thermal-hydraulic analysis of the cooling system for the 500 KW Virginia Polytechnic Institute and State University reactor

    … 2) surface boiling should not occur on any fuel plate, 3) fuel meltdown must not occur after a loss-of-flow or loss-of-coolant accident, 4) fuel plate vibration problems should not be significant. The results of the investigation indicate that the above limiting conditions will not be exceeded …

    vt Repository record for A thermal-hydraulic analysis of the cooling system for the 500 KW Virginia Polytechnic Institute and State University reactor (opens in a new tab)

  13. Numerical analysis of fluid-structure interaction problems involving turbulent flows

    … examines the vibroacoustic response of elastic plates excited by turbulent flows using a one-way coupled approach. The second part develops a fully coupled FSI solver, MPCUGLES-FSI, to handle large-scale FSI problems, and uses it to perform direct numerical simulation (DNS) of turbulent channel …

    umn Repository record for Numerical analysis of fluid-structure interaction problems involving turbulent flows (opens in a new tab)

  14. Solving a fluid-plate interaction problem using finite element methods with domain decomposition strategies

    <p>This thesis studies numerically a fluid-plate interaction problem which models the coupled vibration between an acoustic field and an elastic thin plate. Since the thickness of the plate is negligible, the plate serves a dual role in the model. It is the solid medium and at the same time it is …

    ut-knoxville Repository record for Solving a fluid-plate interaction problem using finite element methods with domain decomposition strategies (opens in a new tab)

  15. Optimum mounting of electronic circuit boards for components and circuits survivability.

    … the board and mounted components are exposed to vibration of varying amplitude and frequencies. Optimum mounting and component placement to reduce the effect of vibration on the equipment may prolong the service life of the system and reduce costly down time. Electronic boards are often mounted …

    ottawa-retro Repository record for Optimum mounting of electronic circuit boards for components and circuits survivability. (opens in a new tab)

  16. Free vibration and buckling analysis of thin rectangular plates with classical boundary conditions under unilateral in-plane loads.

    Interest in the free vibration of thin rectangular plates has emerged due to the rapid growth in computer technology. Delicate electronic components mounted on circuit boards may be placed in environments under dynamic loadings. The designer may need to control the natural frequency or mode shape …

    ottawa-retro Repository record for Free vibration and buckling analysis of thin rectangular plates with classical boundary conditions under unilateral in-plane loads. (opens in a new tab)

  17. The computer evaluation of the natural frequencies of vibrating circular plates with free, fixed and simply supported edges

    The natural frequencies of the transverse vibration of a thin, isotropic, circular plate with free, clamped, and simply supported edge conditions were studied extensively. The frequency equation for each edge condition was derived from the classical partial differential equation of plate vibration. …

    njit Repository record for The computer evaluation of the natural frequencies of vibrating circular plates with free, fixed and simply supported edges (opens in a new tab)

  18. ORTHOGONAL POLYNOMIALS AND SUBSECTIONING METHOD FOR VIBRATION OF PLATES

    … and accurate numerical method for solving the vibration problems of rectangular thin plates having discontinuity at the edge boundaries or at the internal plate domain is presented. In the analysis, the problem domain is subdivided into several rectangular segments, and the deflection function …

    nus Repository record for ORTHOGONAL POLYNOMIALS AND SUBSECTIONING METHOD FOR VIBRATION OF PLATES (opens in a new tab) Download file for ORTHOGONAL POLYNOMIALS AND SUBSECTIONING METHOD FOR VIBRATION OF PLATES (opens in a new tab)

  19. Investigation of transmission loss through double wall structures with varying small air gaps using modal analysis.

    … testing is completed for two single steel plate constructions with different thicknesses and for two double wall constructions with different air gap thicknesses that include the same two plates used in the single plate constructions. Results compare favorably with known theory and …

    louisville Repository record for Investigation of transmission loss through double wall structures with varying small air gaps using modal analysis. (opens in a new tab)

  20. THE DEVELOPMENT OF 2-D ORTHOGONAL POLYNOMIALS FOR VIBRATION OF PLATES

    … highly accurate numerical method is proposed for vibration analysis of plates. Using a set of 2-D orthogonal polynomials as the admissible functions in the Rayleigh-Ritz method permits the study of a wide spectrum of plate vibration problems. The displacement function of the plate is approximated …

    nus Repository record for THE DEVELOPMENT OF 2-D ORTHOGONAL POLYNOMIALS FOR VIBRATION OF PLATES (opens in a new tab) Download file for THE DEVELOPMENT OF 2-D ORTHOGONAL POLYNOMIALS FOR VIBRATION OF PLATES (opens in a new tab)

Page 1 of 2