Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1492 for “"Plating"”.
-
Ion plating
Under ideal conditions ion plating produces finely grained dense coatings with excellent adhesion. The ion bombardment induced damage initiates a large number of small nuclei. Simultaneous coating and sputtering stimulates high rates of diffusion and forms an interfacial region of graded …
-
Tungsten Plating
During the past twenty years electro-plating has undergone a thorough transformation from an art into a science in which physical chemistry is playing an important role. The factors which govern the plating of copper, nickel and brass are well known. Recently new processes have been found for the …
-
Plating Wastewater Management
… with emphasis being placed on the handling of plating wastes, since they are the main contributor of industrial wastewater pollutants at the facility. The flow, storage, and treatment of the plating wastes were studied. Literature concerning plating wastes was surveyed to determine the latest …
-
Plating Wastewater Treatment
Plating waste is potentially hazardous to human health and environment when they are not managed properly. The spent solvent, waste water, sludge and spent process solutions are the main waste pollutions which generated in large volumes daily in plating industries. Some hazardous and special wastes …
-
High Speed Impinging Jet Plating: Slot Jet and Through-Hole Plating
… characteristics of two different impinging jet plating systems was investigated in this study. The local mass transfer rates for slot jet system were measured with use of sectioned electrode technique and were compared with the other previous studies. Based on the measured mass transfer …
-
The determination of fluorine in nickel plating solutions and in chromic acid plating solutions
Thesis (M.S.)--Michigan State College of Agriculture and Applied Science, 1932
-
Bronze plating in cutlery manufacture.
… in cutlery production.A new commercial bronze plating bath was assessed for the production of cutlery. The effect of electrolyte pH and current density on deposit composition and distribution were investigated.In production it would be necessary to tightly control the tin content of the bronze …
-
Electromagnetically Navigated Forearm Fracture Plating
… navigation be in the case of forearm fracture plating? Recent studies, on artificial models, that used tracked personalized guides showed accuracy that was comparable to optical tracking - the gold standard of surgical navigation in orthopedics. This work explored whether electromagnetic …
-
Tin Sensitization For Electroless Plating
… process has been used in electroless plating since 1940s Brenner and Riddell developed the electroless plating for surface metallization method. It was found to be an interesting topic to study tin sensitization for chemically controlling metal deposition on different substrates, …
-
The Throwing Power in Chromium Plating
In chromium plating, it is very difficult to get a continuous deposit of chromium of uniform properties upon irregularly shaped articles and especially upon those having deep recesses. the nature, cause, and methods on improvement of this poor throwing power will be treated.
-
Hardness and Porosity in Chromium Plating
In recent years chromium plating has been subjected to much research due to its ever-increasing demand. The results of these investigations have demonstrated the valuable properties of this plate. Of its many advantageous properties, hardness is one of the outstanding ones, but its application in …
-
The modernization of a plating room
Thesis ()--Michigan State College of Agriculture and Applied Science. Dept. of Engineering, 1941
-
Addition Agent Behaviour in Acid Tin Plating
… agents used commercially in the high speed tin plating of steel strip were separated into their constituent compounds. To identify the active constituents tin was electrodeposited from a series of solutions containing the separate compounds and the structure of the deposits examined. The solid …
-
Current Efficiency of Various Chromium Plating Baths
… are difficulties to be overcome in chromium plating, such as, Poor throwing power. Formation of trivalent chromium. Evolution of hydrogen at the cathode. It has been found that current efficiency is low, resulting in low throwing power, uneven plating and waste of electric energy. In this …
-
Quasi-static tearing tests of metal plating
… of the deformation modes in blast-loaded metal plating suggests that a physical model can be developed to simulate the force vs. displacement history produced by an impinging shock wave during the holing phase. Similar approaches have been successfully used to approximate damage due to grounding …
-
Lithium Plating Detection Using EIS and ICA
… a method to explore one such phenomenon: lithium plating. This method can help avoid conditions that lead to lithium plating during operation, thereby extending battery life and promoting Battery Electric Vehicles (BEVs) as viable alternatives to Internal Combustion Engine (ICE) vehicles. This …
-
Optimization of SLA Photopolymers for Nickel Plating Applications
Applications in the aerospace and defense industries are demanding stronger and lighter parts for use in aircraft and spacecraft. Additive manufacturing (AM) has allowed engineers to create complex parts that would be difficult or even impossible to create through standard manufacturing methods. …
-
Emissions of formalderhyde from electroless copper plating operations
Master of Science (M.S.)
-
An investigation into ion plating mechanisms and parameters
Ion plating is a fairly new and modern technique forobtaining very adhesive films on any kind of surface andsubstrate material. The development of electron gun evaporation sources created the possibility to deposit, with high rates, materials having high melting points like : Molybdenum, Tungsten …
Page 1 of 75