Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"Plating baths"”.
-
Current Efficiency of Various Chromium Plating Baths
… are difficulties to be overcome in chromium plating, such as, Poor throwing power. Formation of trivalent chromium. Evolution of hydrogen at the cathode. It has been found that current efficiency is low, resulting in low throwing power, uneven plating and waste of electric energy. In this …
-
A rotating ring-disk study of interactions among SPS, cuprous ions, and oxygen
The most common additives in copper plating baths for deep via filling are chloride, polyethylene glycol (PEG), a suppressor, and bis-(3-sulfopropyl)-disulfide (SPS), an accelerant. The copper in acid plating baths is provided by a Cu (II) salt. Cu (I) may be present as well and it influenced the …
-
AN ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY AND PSEUDO STEADY STATE VOLTAMMETRIC STUDY OF THE CHLORIDE-SUPPRESSOR COMPLEX FORMED ON THE COPPER SURFACE IN PLATING BATHS THAT EXHIBIT SUPERFILLING USED IN THE DUAL DAMASCENE PROCESS DURING THE COPPER METALLIZATION OF SEMICONDUCTORS
… electrochemistry of the additives used in the plating bath are less-well understood than they should be. In this work, the behavior of the suppressor is investigated, and shown to have a well-defined potential at which it ceases suppressing copper deposition. Electrochemical impedance …
-
Silver Surfaces for Dropwise Condensation of Steam
… of an additional promotor. For electroplating, the critical silver thickness depended on the electroplating bath used and the method of surface preparation prior to plating. Six combinations of four plating baths and two surface preparation techniques were studied. The minimum thickness …
-
Sonoelectrochemistry and electrodeposition for water treatment, sensor improvement and fuel production
… electrocatalysts. In Chapter 5, the electroplating of platinum onto boron doped diamond electrodes from ionic liquid plating baths was compared to carrying out platinum electroplating from an aqueous bath, and it was found that the nature of the platinum deposits were different as a result …
-
The Effect of Sodium Fluoride on the Bright Plating Range of Chromium
… and experimentation .in the field of chromium plating, in the endeavor to provide a lasting, beautiful plate at a minimum of expense. Present chromium plating baths containing sulphuric acid as the active agent of deposition leave much to be desired as far as the extent of the bright plating …
-
A Chromium Plating Bath Containing Sodium Benzenesulfonate Instead of Sulfuric Acid
… is greatly reduced. The present chromium plating baths containing sulfuric acid as the active agent in electrolysis presents many problems leading to investigation and experimentation as far as the throwing power, plating range, and efficiency is concerned. Many addition agents have been …
-
An investigation of the mechanism controlling the co-deposition of aluminas with copper during electrodeposition of copper
… copper. The aluminas were present in the copper plating electrolytes as an insoluble disperse phase. Three possible mechanisms for co-deposition of aluminas were studied, They were mechanical inclusion, electrophoretic deposition, and adsorption. The results of experimental studies established …
-
Additive monitoring and interactions during copper electroprocessing
… for decades. Renewed interest in copper electroplating is not limited to the copper producers but is also a major concern of semiconductor manufacturers. The focus on copper electrochemistry by the semiconductor manufacturers has increased since IBM's announcement in 1997 that copper will be …
-
The influence of ions in solution on the uptake of hydrogen by cathodically polarized high-strength steel
… investigated with particular reference to Cd-Ti plating baths. It has been found that if a coherent film of titanium suboxide is formed under suitable polarizing conditions, hydrogen absorption is reduced to a very low value. The nature of the film formed has been examined by X-ray and electron …
-
ELECTRODEPOSITION OF COPPER IN THE PRESENCE OF ADDITION AGENTS
… is, substances which, when added to electrolytic plating baths, cause the production of very smooth or bright deposits and permit the use of higher current densities. As pointed out by Blum and Hogaboom: "The term 'addition agent', in its broadest sense includes all substances, other than the …
-
Speciation and elemental analysis employing a custom designed echelle spectrometer and a charge injection device array detector.
… concentration in a series of electroless copper plating baths are presented.
-
Investigation on the Mechanism of Electrocodeposition and the Structure-Properties Correlation of Nickel Nanocomposites
… the electrocodeposition (ECD) process from metal plating baths containing dispersed nanoparticles. By using this technique, a broad range of substrate sizes and shapes can be coated cost-effectively. However, the prediction of the amount as well the distribution of nanoparticles within the metal …
-
Tungsten fluorides : synthesis and characterization, and electrochemical investigations in the FLINAK molten salt eutectic
… species suggested by previous work. The optimum plating baths reported in the previous studies was in the range where WF<sub>6</sub><sup>3-</sup> and WF<sub>8</sub><sup>3-</sup> were found to be in approximately equal proportions.</p> <p>The electrochemistry of tungsten was adversely affected by …
-
The removal and recovery of fluoborate from plating rinse waters
… Also, electrodialysis can be employed to recover plating solutions from the rinse waters.</p>
-
In situ Surface X-ray Diffraction Studies of the Copper-Electrolyte Interface: Atomic Structure and Homoepitaxial Growth
… microchips. In this `damascene copper electroplating’ process, multicomponent electrolytes containing organic additives realize void-free filling of trenches with high aspect ratio (`superconformal deposition’). Despite manifold studies, motivated by the continuous trend to shrink wiring …
-
Functionalization of particles and selective functionalization of surfaces for the electroless metal plating process
Electroless plating is a metal deposition technique widely used in the coating industry. It is the method of choice to plate substrates with complex geometries and nonconductive surfaces, such as polymers and ceramics, since it is based on a chemical reduction in solution rather than on an external …
-
Mechanism of hydrogen blistering in alpha-iron, The
Includes bibliographical references.
-
Optimization of a Nanotechnology-Based System for the Treatment of Electroplating Wastewater
… finishing sector, particularly the electroplating industryindustry, was identified as the best fit for our nanotechnology following these interviews. To better interpret and apply our customer discovery data, a universal, mix-method quantitative/qualitative approach was developed to …
-
Spectroelectrochemical investigation of passive layers formed on electrode surfaces
… (BTA) is the prototypical inhibitor used in both plating baths and for the chemical mechanical planarization in the microprocessor manufacturing. It forms a film that allows uniform removal of the electrodeposited copper to result in smooth surfaces. It has face dependent protection efficiency …
Page 1 of 2