Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 114 for “"Plaxis 2D"”.

  1. Numerical Modeling of Lime-Cement Columns Using PLAXIS 2D and 3D

    … column (LCC) rein forced embankments using PLAXIS 2D and PLAXIS 3D. For 2D, the Volume Aver aging Technique (VAT) which is a homogenization method was used, in which the soil was modeled using S-CLAY1S and the columns using the MNHard model. The aim was to evaluate VAT in PLAXIS 2D for …

    chalmers Repository record for Numerical Modeling of Lime-Cement Columns Using PLAXIS 2D and 3D (opens in a new tab)

  2. Estimating the effectiveness of stone columns in mitigating post-liquefaction settlement using Plaxis 2D

    When the excess pore water pressure generated during an earthquake dissipates in saturated loose sand, it causes post-liquefaction reconsolidation that can potentially yield substantial damage to the structure. To build resilient infrastructure, it is paramount to estimate these settlements as well …

    vt Repository record for Estimating the effectiveness of stone columns in mitigating post-liquefaction settlement using Plaxis 2D (opens in a new tab)

  3. Settlement analysis and environmental assessment of deep mixing binders: A Plaxis 2D study with Volume Averaging Technique

    … was carried out with the finite element software Plaxis 2D, incorporating Volume Averaging Technique. Volume Averaging Technique homogenises the material models S-CLAY1S and MNhard in order to capture the behaviour of enhanced clay, S-CLAY1S for clay and MNhard for mixed columns. The soil and …

    chalmers Repository record for Settlement analysis and environmental assessment of deep mixing binders: A Plaxis 2D study with Volume Averaging Technique (opens in a new tab)

  4. Effects of Lime-Cement Column Characteristics on the Performance of an Embankment on Soft Clay - An Analysis Using Volume Averaging Technique in Plaxis 2D

    … using the Volume Averaging Technique (VAT) in Plaxis 2D. The VAT-model implements two constitutive models, S-CLAY1S and MNhard, for the soil and the columns, respectively, and converts the 3D problem to a 2D problem. The study shows that an increased column stiffness leads to decreased …

    chalmers Repository record for Effects of Lime-Cement Column Characteristics on the Performance of an Embankment on Soft Clay - An Analysis Using Volume Averaging Technique in Plaxis 2D (opens in a new tab)

  5. Influencia del refuerzo con columnas de grava en la estabilidad y asentamientos en suelos de baja capacidad portante del Hospital Ernesto German Gonzales – Oxapampa: Análisis numérico mediante elementos finitos en PLAXIS 2D

    … se llevó a cabo mediante modelación numérica en PLAXIS 2D, empleando el método de elementos finitos. Se compararon dos escenarios: (i) terreno natural sin refuerzo y (ii) terreno reforzado con columnas de grava.

    upc-peru Repository record for Influencia del refuerzo con columnas de grava en la estabilidad y asentamientos en suelos de baja capacidad portante del Hospital Ernesto German Gonzales – Oxapampa: Análisis numérico mediante elementos finitos en PLAXIS 2D (opens in a new tab)

  6. Mejoramiento del asentamiento diferencial de los suelos de fundación mediante estabilización con columnas de material de demolición y modelación numérica en Plaxis 2D – Tramo N°1 (Km 570+350), vía IIRSA Norte

    … esto mediante la modelación numérica en Plaxis 2D y ensayos previos que se realizan para ver las diferentes propiedades mecánicas del suelo y a su vez el comportamiento de la estructura. Se llevó a cabo un análisis experimental y numérico para evaluar la situación natural y con el …

    upc-peru Repository record for Mejoramiento del asentamiento diferencial de los suelos de fundación mediante estabilización con columnas de material de demolición y modelación numérica en Plaxis 2D – Tramo N°1 (Km 570+350), vía IIRSA Norte (opens in a new tab)

  7. Modelling of Anisotropy in Slope Stability Problems - A study about slope stability in Göta Älv valley

    … two different softwares: Geostudio SLOPE/W and PLAXIS 2D. In PLAXIS 2D the Creep-SCLAY1S model is used for the calculation of the slope stability. Results retrieved defines different slip surfaces and factors of safety. For the same slope section, the factors of safety are calculated to be …

    chalmers Repository record for Modelling of Anisotropy in Slope Stability Problems - A study about slope stability in Göta Älv valley (opens in a new tab)

  8. Swedish Method and Volume Averaging Technique in Deep Mixing analysis

    … method using volume averaging techniques with Plaxis 2D. The aim of the study is to calculate the deep mixing effects on studied soft soil by using manual Swedish method and volume averaging techniques method with Plaxis 2D, and to compare the results and the main differences, benefits and …

    chalmers Repository record for Swedish Method and Volume Averaging Technique in Deep Mixing analysis (opens in a new tab)

  9. Massundanträngningens tillbakagång - En FE-analys av primär konsolidering till följd av pålning i lera

    … Studien utförs genom en FE-analys i Plaxis 2D. Initialt genomförs en förbestämd linjeförskjutning, motsvarande den teoretiska pålvolymen, enligt Cavity expansion method (CEM), varefter konsolidering tillåts tills att porövertrycket understiger 1 kPa. Jordmodellerna som används i …

    chalmers Repository record for Massundanträngningens tillbakagång - En FE-analys av primär konsolidering till följd av pålning i lera (opens in a new tab)

  10. Návrh a posouzení sanace železničního náspu na Vsetínsku

    … využito vlastního softwaru a komerčního softwaru Plaxis 2D.

    brno-tech Repository record for Návrh a posouzení sanace železničního náspu na Vsetínsku (opens in a new tab)

  11. Posouzení návrhu sanace tělesa železničního násypu

    … práce je posouzení sanačních opatření v programu Plaxis 2D a seznámení se se základními typy sanací na tratích ČR.

    brno-tech Repository record for Posouzení návrhu sanace tělesa železničního násypu (opens in a new tab)

  12. Zajištění stavební jámy pro výstavbu malé vodní elektrárny ve Štětí

    … pažící podzemní železobetonové stěny v programu Plaxis 2D. Nakonec je zpracován technologický postup provádění této konstrukce.

    brno-tech Repository record for Zajištění stavební jámy pro výstavbu malé vodní elektrárny ve Štětí (opens in a new tab)

  13. Posouzení bezpečnostního celíku u podzemní stavby

    … modelováním provedeným jednak v programu Plaxis 2D verze 2015.02. a také v programu Plaxis 3D Introductory verze 2013.

    brno-tech Repository record for Posouzení bezpečnostního celíku u podzemní stavby (opens in a new tab)

  14. Srovnávací analýza modelování pohledového čela vyztuženého násypu

    … jednotlivých prvků konstrukce v programu Plaxis 2D. Následně je modelována reálná opěrná stěna, přičemž jsou porovnávány různé varianty modelování samotného pohledového čela.

    brno-tech Repository record for Srovnávací analýza modelování pohledového čela vyztuženého násypu (opens in a new tab)

  15. Návrh hlubinného založení domova seniorů v Plzni

    … jsou nakonec srovnány s výstupem z programu Plaxis 2D.

    brno-tech Repository record for Návrh hlubinného založení domova seniorů v Plzni (opens in a new tab)

  16. Comparison of Modelling Strategies for Ground Settlements due to Groundwater Drawdown Multi-criteria analysis for comparison of three software packages

    … the Soft Soil Creep model available in Plaxis 2D and the Chalmers model with creep available in GS Set tlement. To evaluate the appropriateness of them, settlement calculations for both 1D and 2D soil models are performed, together with a multi-criteria analysis (MCA). The 1D modelling …

    chalmers Repository record for Comparison of Modelling Strategies for Ground Settlements due to Groundwater Drawdown Multi-criteria analysis for comparison of three software packages (opens in a new tab)

  17. Evaluación de la estabilidad física de un depósito de relave construido aguas arriba mediante equilibrio límite (MEL) y reducción de parámetros (Phi-Reduction)

    … (MEL). Para ello se emplearán dos softwares Plaxis 2D y Slide respectivamente. El estudio enfoca la comparativa de factores de seguridad obtenidos por ambas metodologías, en el cual se identifican zonas críticas de inestabilidad. Se especifican las propiedades geotécnicas del relave, ya sea …

    upc-peru Repository record for Evaluación de la estabilidad física de un depósito de relave construido aguas arriba mediante equilibrio límite (MEL) y reducción de parámetros (Phi-Reduction) (opens in a new tab)

  18. Studie zajištění stavební jámy

    … následně staticky posouzeny v programech GEO5 a Plaxis 2D. V práci je dále uveden krátký rozbor jednotlivých metod zajištění stavebních jam a zpracována základní výkresová dokumentace pro jednotlivé varianty.

    brno-tech Repository record for Studie zajištění stavební jámy (opens in a new tab)

Page 1 of 6