Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 384 for “"Plug flow"”.
-
The plug flow of paper pulp suspensions
… part of a programme of research concerning the flow behaviour of paper pulp suspensions commenced at the University of Auckland in 1969. A primary aim of the research was to supply the industry with reliable pipe friction data for the pulps manufactured in New Zealand mills. Secondly, it was …
-
Analytical and numerical study of plug flow inside round/concentric microchannels
Plug flow can generate recirculating flow between interfaces of immiscible fluids. Depending on the phase used to segment flow, it can be gas-liquid plug flow or liquid-liquid plug flow. The recirculating flow can enhance heat transfer as compared to the continuous pipe flow, especially in the …
-
Analysis of substrate limited fermentation in a dispersed plug-flow reactor
A tubular reactor, in which there is a dispersed plug-flow and in which a single cell fermentation occurs is critically analyzed using a lumped approximation technique. Estimates of the bounds of Fermentation Number where multiple solutions can occur and the necessary and sufficient conditions for …
-
Development of Automated Fault Recovery Controls for Plug-Flow Biomass Reactors
… the design, development, and implementation of a Plug-Flow Reactor Biomass Gasifier integrated with an Automated Auger Jam Detection System and a Blower Algorithm to maintain constant reactor pressure by varying blower speed with respect to changes in reactor pressure. The system is based on …
-
Black liquor oxidation with molecular oxygen in a plug flow reactor
Thesis (Ph.D.)--University of Washington.
-
DESIGN AND ECONOMICS OF PLUG-FLOW, SMALL-SCALE ANAEROBIC DIGESTERS FOR TEMPERATE CLIMATES
… research analyzes the design and economics of plug flow digesters, modeled after low-cost digesters utilized in the developing world and modified to operate on small to medium-scale farms located in the temperate United States. The objectives of this research are to: 1) Describe the modified …
-
Coupling complex microchannel heat exchanger CFD with plug flow and Poiseuille flow models
… be simplified by solving the individual channel flow separately. By substituting plug flow and Poiseuille flow models for the individual channels, computational efficiency can be improved. This work presents the coupling of plug flow and Poiseuille flow models with ANSYS's computational fluid …
-
A study of the reaction kinetics for the thermal oxidation of dilute n-heptane vapors in a plug flow reactor
During August through October, 1986, experiments were conducted with the aim of devel oping kinetic relationships for the thermal oxi dation of dilute n-Heptane vapors in air using a Lindberg tube furnace reactor. This project was designed to be the first step in the ultimate goal of research ing …
-
Adaptive Neuro-Fuzzy Inference Systems (ANFIS) - Based Model Predictive Control (MPC) for Carbon Dioxide Reforming of Methane (CDRM) in a Plug Flow Tubular Reactor for Hydrogen Production
The current sources of our energy supply are plagued with many problems, and the impact on the climate is of grave concern. To preserve and sustain our environment, a non-polluting and renewable energy source is required. Hydrogen (H2), when extracted from one of its many sources during carbon …
-
Comparison of two different anaerobic feeding strategies on the treatment of municipal primary effluent using aerobic granular biomass
… (AGB) in full-scale operations utilizes a plug-flow feeding configuration, but there has been minimal research conducted with alternative feeding configurations. An AGB study, comparing a plug-flow feeding reactor, to a completely mixed feeding reactor was suggested because converting a …
-
The characterisation of the hydrodynamic vortex separator using residence time distribution analysis.
… in the sewerage system as a combined sewer overflow (CSO) for the separation of solids from an incoming waste stream. This project presents the first stage in developing and aiding the existing design methodology for the optimisation of kinetic processes within the HDVS. The kinetic process …
-
ΠΡΟΣΟΜΟΙΩΣΗ ΤΗΣ ΛΕΙΤΟΥΡΓΙΑΣ ΑΝΤΙΔΡΑΣΤΗΡΩΝ - ΔΙΑΧΩΡΙΣΤΩΝ ΜΕ ΕΝΣΩΜΑΤΩΜΕΝΗ ΜΕΜΒΡΑΝΗ
… ARE SIMPLIFIED WITH THE ASSUMPTIONS OF PLUG FLOW CONDITIONS AND ISOTHERMALITY WHICH, IN MANY CASES, ARE NOT VALID ESPECIALLY WHEN HIGHLY SELECTIVE MEMBRANES ARE USED. AS CONCERNS THE INDUSTRIAL MEMBRANE REACTOR - SEPARATORS, A WELL POSED THEORETICAL MODEL HAS NOT BEEN DEVELOPED FOR THE …
-
Modeling the Extent of Virus Removal in Waste Stabilization Ponds to Support Reuse of Wastewater
… models from reactor theory: complete mix, plug flow, and dispersed flow. Pearson’s correlation analysis was used to determine correlations between Kv,app values and the following design, operational, and environmental parameters: solar radiation, air temperature, pond depth, hydraulic …
-
Characterisation of solid flux in packed-fluidized bed: Mixing response of a pulse input during fluidization
… bed inability to achieve counter-current flow[1]. One approach that has shown improvement on the mass transfer is to introduce packing material to the fluidized bed to facilitate counter-current flow. Earlier work has shown packing material in the fluidized bed greatly increased the …
-
A study of fast reactions in nozzle type reactors
… x 10¯³ m³ and 5.13 x 10¯³ m³ respectively, and flow visualizations have been studied by injecting a tracer into the inlet and at the walls of the reactors. A mathematical model which has been developed, suggests that the flow characteristics in the systems consisted mainly of a series of …
-
Analysis of temporal trends in southern Nevada wastewater pond parameters with an emphasis on ammonia removal
… mass transfer coefficients for well-mixed, plug flow, and plug flow with dispersion are also calculated.
Page 1 of 20