Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"Pneumatic control"”.

  1. Reconfigurable RF Devices Using Pneumatic Control of Solid Dielectric Slugs

    … antennas, the biasing structures for these DC-controlled switching components become more complex, which leads to design limitations, losses, and undesired radiation. Other reconfigurable technologies, such as MEMS and liquid crystals, could be chosen for a particular application depending on …

    calgary Repository record for Reconfigurable RF Devices Using Pneumatic Control of Solid Dielectric Slugs (opens in a new tab)

  2. Quantitative force measurements of pneumatic control on a wing/strake model.

    … measure the lift and drag effects of pneumatically controlling a leading edge vortex generated by a half-span, genericfighter- wing model was conducted. The study measured the added lift and drag upon the model, throughout a range of angles of attack, utilizing blowing tubes of …

    nps Repository record for Quantitative force measurements of pneumatic control on a wing/strake model. (opens in a new tab)

  3. Baromorphing Active Wing Technologies for future zero-emission flight by pneumatic control (BAWTech)

    … sensing hairs. The experiments investigate using pneumatics for active flow control via trailing edge flaplets and then bio-inspired sensing flow hairs, including a new camera setup for sensing hair monitoring. The pneumatic flaplets were inspired by the pop-up feathers that birds have, that aid …

    city-london Download PDF for Baromorphing Active Wing Technologies for future zero-emission flight by pneumatic control (BAWTech) (opens in a new tab)

  4. A Smart Prosthesis Socket Liner to Address Factors That Lead to Prosthesis Abandonment

    … This novel socket liner used closed-loop pneumatic control systems to regulate the fit of the human-socket interface and accommodate residual-limb volume fluctuations. Multiple real-time classification algorithms were developed to prescribe the desired fit of the pneumatic control system …

    gatech Repository record for A Smart Prosthesis Socket Liner to Address Factors That Lead to Prosthesis Abandonment (opens in a new tab)

  5. Uma técnica de linearização por realimentação para compensação de agarramento em válvulas de controle pneumáticas

    In control loops valve stiction is a very common problem. Generally, it is one of main causes of poor performance of industrial systems. Its most commonly observed effect is oscillation in the process variables. To circumvent the undesirable effects, friction compensators have been proposed in …

    brazil-ufrn Repository record for Uma técnica de linearização por realimentação para compensação de agarramento em válvulas de controle pneumáticas (opens in a new tab)

  6. Experimental and Numerical study of Air thrust bearing controlled by diaphragm valve

    … can be achieved. Moreover, linear positioning control is not affected by the highly nonlinear friction forces, and high precision positioning or high speed can be achieved. The main drawbacks of aerostatic bearings are low stiffness and load capacity and sometimes poor damping in comparison to …

    poli-torino Repository record for Experimental and Numerical study of Air thrust bearing controlled by diaphragm valve (opens in a new tab)

  7. Dynamical Adaptive Backstepping-Sliding Mode Control for servo-pneumatic positioning applications: controller design and experimental evaluation

    Servo control of pneumatic actuators is difficult due to the high compressibility and non-linear flow of air. Friction as well as uncertainties in the parameters and model character-izing dynamics of the pneumatic systems further contribute to control challenges. These drawbacks cause stick-slip …

    manitoba Repository record for Dynamical Adaptive Backstepping-Sliding Mode Control for servo-pneumatic positioning applications: controller design and experimental evaluation (opens in a new tab)

  8. Experimental comparison of advanced control strategies

    … is to compare experimentally several advanced control strategies on a heat exchanger and fluid flow system. The experimental set-up was established a few years back and consists of a shell-and-tube heat exchanger with several control valves. This heat exchanger uses steam or hot water on its …

    ttu Repository record for Experimental comparison of advanced control strategies (opens in a new tab)

  9. Methods for evaluating the potential to power industrial processes with geospatially and temporally varying renewable energy resources

    … desalination facilities, as well as electrified pneumatic control systems at oil and gas production sites. The first study in this dissertation developed a method for assessing the technical and economic viability of using these renewable forms of energy to power brackish groundwater desalination …

    texas Repository record for Methods for evaluating the potential to power industrial processes with geospatially and temporally varying renewable energy resources (opens in a new tab)

  10. Enabling technologies for MRI guided interventional procedures

    … high-field MRI scanners. The robot is a servo pneumatically operated automatic needle guide, and effectively guides needles under real- time MR imaging. This thesis describes development of the robotic system including requirements, workspace analysis, mechanism design and optimization, and …

    jhu Repository record for Enabling technologies for MRI guided interventional procedures (opens in a new tab)

  11. Studies of microfluidic devices for cell separation and analysis

    … separation zones in a single separation channel. Pneumatic control channels were used to define multiple antibody zones that could be used to compare several ligands for selective cell capture. Four different antibody regions were established in one channel to a cell line for sequential cell …

    ttu Repository record for Studies of microfluidic devices for cell separation and analysis (opens in a new tab)

  12. Design and Modeling of a Soft, Pressurised, Spherical Robot

    … able to adjust its air pressure with an embedded pneumatic control system, and this thesis shows how that causes changes in the ball’s dynamics. The design of the internal driving mechanism, prior history, and a taxonomy of the spherical robots is also outlined. A non-trivial feature of the robot …

    tamu Repository record for Design and Modeling of a Soft, Pressurised, Spherical Robot (opens in a new tab)

  13. Modeling, Control, and Learning for Whole-Body Manipulation With Large-Scale Soft Robots

    … by overcoming limitations in hardware, modeling, control, and learning. First, we present hardware advancements with PneuDrive, a pneumatic control system for actuating soft robots. We also introduce Baloo, a hybrid soft-rigid robotic torso which achieves a single-arm payload capacity of 19.3 kg …

    byu Repository record for Modeling, Control, and Learning for Whole-Body Manipulation With Large-Scale Soft Robots (opens in a new tab) Download PDF for Modeling, Control, and Learning for Whole-Body Manipulation With Large-Scale Soft Robots (opens in a new tab)

  14. Fault simulator and detection for a process control valve

    … study a novel fault simulator for a quarter-turn pneumatic control valve is presented. Another contribution of this study is a novel fault detection and diagnosis method for a control valve. It has been possible to analytically model control valve dynamics, despite their inherent nonlinearities …

    aalto Repository record for Fault simulator and detection for a process control valve (opens in a new tab)

  15. A Knowledge-based Energy-saving Approach to PWM Control of a Novel Integrated Pneumatic Valve

    … valve to increase the energy efficiency of pneumatic systems through the optimization of ow consumption. Modeling and simulation of the proposed system was carried out to assess the proposed ideas and reduce the cost of system developments. An experimental setup was constructed to assess the …

    waterloo Repository record for A Knowledge-based Energy-saving Approach to PWM Control of a Novel Integrated Pneumatic Valve (opens in a new tab)

  16. Design and Development of Atraumatic Vacuum Assisted Delivery Devices

    … using textile reinforced silicone). A pneumatic control system provides an actively controlled vacuum to the instrumented device. Optical markers, placed onto the scalp model, combined with a high-speed camera system provide tracking of scalp deformation during the mechanical simulation …

    whiterose Download PDF for Design and Development of Atraumatic Vacuum Assisted Delivery Devices (opens in a new tab)

  17. Performance evaluation, economic analysis and improvement recommendations for a batch drying chamber system at the ISU Agricultural Engineering and Agronomy Research Farm

    … boiler utilizes hot water heat exchangers controlled with pneumatic valves that control the temperature in each drying chamber. It was evaluated to operate at a maximum 29,880 Btu/h heat capacity and 83.2% heating efficiency. Alternatives for the boiler-based system are electro-mechanical …

    iastate Repository record for Performance evaluation, economic analysis and improvement recommendations for a batch drying chamber system at the ISU Agricultural Engineering and Agronomy Research Farm (opens in a new tab)

  18. The development of a controller for differential pressure calibrations

    … requirement, transducers were connected pneumatically to a differential pressure controller over lengthy pressure lines. Unfortunately, the pressure controller required over twenty minutes to set a stable output pressure due to the large volume of the pressure lines. The development of a …

    ut-knoxville Repository record for The development of a controller for differential pressure calibrations (opens in a new tab)

  19. Αλλοθερμική αεριοποίηση στερεών καυσίμων

    … of the ceramic insulation. A proper automatic control system (Programmable Logical Controller (PLC) interfaced with a PC) provides for the kiln temperature control, while the real time acquisition and recording in the PC of temperature and pressure data is accomplished with the aid of …

    greece Repository record for Αλλοθερμική αεριοποίηση στερεών καυσίμων (opens in a new tab)

Page 1 of 2