Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 204 for “"Polarization Resistance"”.
-
The Effect of Sweep Rates on Linear Polarization Resistance Measurements
A study of Linear Polarizations Resistance Measurements for silver metal immersed in a solution of AgNO3 and HNO3 to determine the effect of varying potential sweep rates has been made. Results indicate that for the system under investigation the Polarization Resistance is a non-linear function of …
-
Assessment of In-situ Corrosion Conditions at Nevada Mechanically Stabilized Earth Wall Sites: Using Electrochemical Soil Characteristics and Linear Polarization Resistance
… backfill characterization and linear polarization resistance (LPR) corrosion rate monitoring. Evaluation of electrochemical backfill characteristics has resulted in the discovery of six sites that fail current NDOT/ AASHTO MSE wall backfill requirements. The in-situ soil samples …
-
A Comparison of Corrosion Rates Determined by Polarization Resistance Measurements for Zinc and Cadmium Metal Immersed in Nonstirred Aqueous Portland Cement Solution
… metal using Tafel extrapolation and linear polarization measurements has been investigated. Results indicate that for the corrosion systems under investigation, zinc metal has a higher corrosion potential and lower corrosion rate than cadmium metal.
-
Electrochemical Characterization and Acoustic Emission Monitoring of Corrosion in Prestressed Concrete Piles
… and monitored with open-circuit potential and polarization resistance measurements to study the feasibility of a criterion for corrosion detection based on the polarization resistance. The specimens were monitored continuously with acoustic emission (AE) sensors to investigate the feasibility …
-
Effects of strontium doping on oxygen reduction kinetics in thin-film LSCF cathodes
… (600, 700 and 800 °C). The total electrode polarization resistance, Rpob was plotted as a function of composition and temperature. Results show that, for all temperatures, the total polarization resistance drops considerably when the Sr composition is reduced from 0.4 to 0.3, and then …
-
Electrochemical Properties of Rhodium-Plated Esthetic Orthodontic Archwires
… (OCP) was monitored for 2 hours followed by a polarization resistance test and cyclic polarization. OCP at 2 hours, polarization resistance (Rp), corrosion current (Icorr), and presence of pitting were determined. Results: OCP results at 2 hours favored the Iconix wire at 360±2 mV (vs SCE) …
-
New electrochemical cells for energy conversion and storage
… was checked. That optimization could reduce the polarization resistance of electrodes and improve the stability with time. Additionally, the limiting mechanisms in the oxygen reduction reaction were determined, and the influence of CO2 containing atmospheres was checked. La2NiO4+d;, pertaining to …
-
Towards rational design of solid oxide fuel cell electrodes through surface modification
… high surface area of the counter electrode, the polarization resistances measured were dominated by the dense LSCF thin film. The planar dense film allows for precise control over the modification with conformal thin films via RF sputtering. The first part of the dissertation describes the …
-
Study of the Corrosion Resistance of Benchmark Coatings Using Electrochemical Impedance Spectroscopy
The corrosion resistance of polymer-coated carbon steel exposed to corrosive environment of 3.5% NaCl solution (weight fraction) at ambient conditions was evaluated using electrochemical impedance spectroscopy (EIS) technique. The analysis of impedance models involved using suitable electrical …
-
Microbiological and chemical aspects of corrosion of sheet steel in the Duluth-Superior Harbor
… and iron-oxidizing bacteria had higher inverse polarization resistance values. Inverse polarization resistance is frequently used to approximate the instantaneous rate of corrosion. Mass lost and pit depth were measured on steel in the microcosm, and these two measurements showed a positive …
-
Enhancing the Stability and Performance of Solid Oxide Cells by Tailoring Surfaces and Interfaces through Surface Modification
… surface of a porous air electrode, reducing the polarization resistance while increasing the stability of the electrode. For example, the application of an SSG coating of PrOx to a La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) electrode reduced the polarization resistance from 1.136 to 0.117 Ω cm2 at 600 °C …
-
Effect of Alloying with Palladium on the Corrosion Behavior of CoCr and NiCr Dental Alloys
… was monitored for 20 hrs followed by linear polarization and cyclic polarization tests. OCP at 20 hrs, polarization resistance (Rp), and corrosion current density (Icorr) were compared using Kruskal-Wallis and Mann-Whitney tests to determine whether differences existed between alloys and a …
-
Design, synthesis, and impedance spectroscopy of triple ionic-electronic conducting thin film electrodes
… (PLD). Device performance, as represented by polarization resistance of half fuel cells comprising BCFZY thin films atop an electrolyte layer, was evaluated as a function of temperature and gas atmosphere. The dependence of polarization resistance on chemical composition, temperature, and …
-
Studies On Synthesis, Microstructure and Transport Properties of Doped Cerium Oxides
… of 0.2 S cm−1 at 700 °C in H2. An area specific polarization resistance of 0.23 Ω cm2 was observed for both Mg-CYMO and Ce0.8Y0.1Mn0.1O2-δ (10CYMO) at 800 °C, in wet H2. Chronoamperometric measurement for the symmetrical cell configuration based on 10CYMO electrodes showed stable performance upon …
-
Hydrogen and Carbon Monoixde Electrochemical Oxidation Reaction Kinetics on Solid Oxide Fuel Cell Anodes
… test conditions. For the H2/H2O system, the polarization resistance (Rp) increases as temperature, overpotential, H2 partial pressure, TPB length decreases. Rp is also dependent on H2O content. When the H2O content is between 3% and 30-40%, Rp decreased with increasing H2O content. However, …
-
Long Term Corrosion of Reinforcing Strips in Mechanically Stabilized Earth Walls
… testing consisted of half-cell potentials, polarization resistance measurements, and electrochemical impedance spectroscopy. Corrosion rates reported in this thesis are based upon polarization resistance measurements. The destructive testing consisted of soil extraction and hardware …
-
Assessment of Commercial Corrosion Inhibiting Admixtures for Reinforced Concrete
… corrosion activity as indicated by linear polarization, and ancillary temperature, relative humidity, and chloride concentration documentation. Simulated pore solution specimens were analyzed on the basis of weight loss and surface area corroded as a function of chloride exposure. …
-
Impedance spectroscopy response of aluminum-copper-silicon alloys
… Cu and Si additions and heat treatment on the polarization resistance, oxide-layer/double-layer capacitance, open circuit potential and breakdown potential of Al-Cu-Si alloys was evaluated. Electrochemical impedance spectroscopy and DC polarization techniques were combined with mechanical …
-
Fabrication and characterization of protonic-ceramic fuel cells and electrolysis cells utilizing infiltrated lanthanum nickelate electrodes
… cell testing, it was found that the electrode polarization resistance decreases with increasing oxygen content, indicating good oxygen reduction reaction characteristics. A minimum polarization resistance was found as 2.58 Ohm-cm[superscript 2] in 3% humidied oxygen at 700 [degrees]C. Full cell …
-
Avaliação de heterociclo do tipo mesoiônico solubilizado em sistema microemulsionado para aplicação em dutos
… were evaluated by the techniques of linear polarization resistance (LPR) and loss of weight (MW) in a cell instrumented given the gravity and electrochemical devices. The systems were shooting speed of less than 60 minutes and efficiency of inhibition [SCO-ME (91.25%) and SCO-ME-MI (98.54%)]
Page 1 of 11