Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 203 for “"Poling"”.
-
Poling of barium titanate nanoparticles-incorporated piezoelectric paper substrates
… poled. This research project focuses on corona poling of 300 nm barium titanate nanoparticles incorporated paper based piezoelectric composites manufactured using unrefined and refined Northern Bleached Softwood Kraft (NBSK) pulp. The highest piezoelectric charge constant of 37.2 pC/N …
-
ELECTRO-OPTIC CONTACT POLING OF POLYMER WAVEGUIDE DEVICES AND THIN FILMS
… designed and created for electro-optic contact poling of waveguide devices and thin film polymers. A sample is heated to the glass transition temperature of the electro-optic polymer and an electric field is applied to allow alignment of chromophores. The sample is then cooled to room …
-
Comparison of a modified double poling ergometer for cross country skiers with disabilities
… exchange ratio) during exercise on a double poling ergometer modified for sit skiers to a field test for the same skiers. Three male and four female athletes from the Canadian National / Developmental team (17-54 years of age, ranging in ability from a complete T7 spinal injury to cerebral …
-
Microstructuring and domain-engineering of lithium niobate using combinations of light, etching and poling
… Device construction uses electric field poling of lithium niobate to create two parallel but oppositely oriented domains. When an electric field is applied across the interface between these domains a change in the refractive index of equal magnitude but of opposite sign is induced. If …
-
Multi-Scale Effects of Poling on Structure-Property Relationships in Lead Magnesium Niobate-Lead Titanate Single Crystals
… was revealed by XRD in the transmission mode. Poling increased the average significance of the superlattice, signifying a structural contribution to the super-structure. The effects of poling on domain and crystallographic structure, and on phase transformation behavior, are reported. The use …
-
Functionalised optical fibre devices with embedded electrodes for nonlinear photonics
… the development of a technique known as thermal poling of silica fibres, which allows for the creation of an effective second order nonlinearity in materials, such as glasses, which naturally lack any second order susceptibility. The main part of the thesis work was devoted to the exploration of …
-
Periodic Domain Inversion of MgO-Doped Lithium Niobate By Corona Discharge Method
… (derr) achieved through corona discharge poling was 17.5 pm/V, which agrees well with theoretical value of 16~19 pm/V. By analysing the second harmonic generation (SHG) tuning curves, the grating uniformity over the 10 mm grating was investigated. The 0.6 run bandwidth of the SHG tuning at …
-
Advanced processing methods to introduce and preserve dipole orientation in organic electro-optic materials for next generation photonic devices
… organic E-O materials needs to be removed by a poling process, which introduces orientation to the polar chromophores by applying high electric field. After poling, this collective orientation is subject to a slow decay over time, which can eventually dissipate the E-O activity of the poled …
-
Parameters governing the piezoelectric properties of PVDF
… peak of PVDF prior to stretching and poling. The crystal size, degree of crystallinity, and β-phase content were characterized before and after stretching, while piezoelectric properties (d33) were measured after poling. Annealing increased both crystal size and degree of …
-
Fabrication and applications of zinc indiffused waveguides in periodically poled lithium niobate
… to optical testing. The factors affecting poling quality, such as crystal discrepancies from different suppliers, electrode materials, patterning quality, and mask design, are investigated and analysed systematically. In addition, back-switch poling methods (involving poling a sample …
-
Light-assisted domain engineering, waveguide fabrication and microstructuring of lithium niobate
… has been demonstrated by 'latent light-assisted poling' and 'inhibition of poling' using ultrafast laser irradiation at 400 nm and CW highly absorbed UV radiation (305..244 nm) respectively. The characteristics of the resultant domains have been experimentally investigated as a function of the …
-
Effect of Electrode Reversal on Induced Nonlinearity in Specialized Silicon Structures
… silicon glass due to alterations in the poling conditions. The alterations are introduced in two steps. First, a set of two identical samples are poled with a positive voltage, but one of the samples is oriented in the opposite orientation inside the poling setup. One can alternatively …
-
A Theoretical Study of Maker Fringe Measurements in Poled Multi-Layer Silica Structures Focusing on the Impact of Layer Quantity and Spacing
… intrinsically, can be achieved through thermal poling. The poling process breaks the intrinsic symmetry of the silica allowing for even ordered non-linearities. After poling was first successfully demonstrated in 1991, the achievable nonlinearity has remained weak (after several attempts). …
-
Modification and processing of glass and glass with embedded silver nanoparticles
… for varying applications. These are: thermal poling of glass, electric field assisted dissolution of glass embedded with silver nanoparticles and the irradiation of glass embedded with silver nanoparticles. Each method will be adapted to present novel and widely applicable approaches to the …
-
Characterization of nonlinear optical polymers and dendrimers for electro-optic applications
… controlled chemistry and creative processing/poling procedures has significantly improved poling efficiencies. The typical solubility limit of guest molecules in the host matrix has been pushed to much higher doping levels without an increase in dielectric breakdowns through the site isolation …
-
Design of surface chemical reactivity and optical properties in glasses
Thermal poling is a technique which involves the application of a strong DC electric field to a glass substrate heated below its glass transition temperature (Tg). Following the treatment, a static electric field is frozen inside the glass matrix, effectively breaking its centrosymmetry. …
-
A comparison of peak blood lactates following maximal upper body and maximal combined upper and lower body simulated ski exercises in elite cross-country skiers.
… following maximal intensity simulated double poling ski exercise (PBLa(A)), were compared with peak fingertip blood lactate values obtained following maximal intensity simulated combined arm and leg ski striding exercise (PBLa(A + L)). The combined arm and leg protocols were performed on two …
-
Enhanced Piezoelectric Performance of Printed PZT Films on Low Temperature Substrates
… process includes deposition, sintering, and poling. However, due to the high sintering temperature (> 800 °C) of PZT, only high melting point material can be served as the substrate. Otherwise, complex film transfer approach is needed to achieve flexible and foldable PZT devices. The …
-
Modification of glasses and optical waveguides using high electric fields
… field strength. The fundamental research on poling induced nonlinearity has been extended to investigate several compositions of Bi<sub>2</sub>O<sub>3</sub>ZnOB<sub>2</sub>O<sub>3</sub> glass systems, whose refractive index is measured to increase with the Bi<sub>2</sub>O<sub>3</sub> content. …
-
Low Loss Hybrid Waveguide Electric Field Sensor Based on Optical D-fiber
… sensitive to electric fields through corona poling. The typical corona poling process is not amenable to poling a polymer located in the fiber core. A method of poling conducive to an in-fiber device was developed and demonstrated. Using PMMA and DR1 for proof of concept, the operation of the …
Page 1 of 11