Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"PolyDADMAC"”.
-
Improvement of pulp-mill wastewater for anaerobic digestion
… Polydiallyldimethylammonium chloride (PolyDADMAC) was the best-performing coagulant and removed 62% lignosulphonate and 57% polyphenols. However, PolyDADMAC also removed 50% of the VFAs. Three batch pre-treatments were performed on the SEC, which were used as feed to the reactors. The …
-
Development of a Novel Perfluoroalkyl Substance Sequestration Scheme Using Alginate Macrobeads and Common Water Treatment Polymers
… polymers poly(diallyldimethylammonium chloride) (polyDADMAC) and epichlorhydrin dimethylamine (EpiDMA) could be reliably and passively delivered to promote sequestration of PFASs. It was found that pumps behaved as expected with one failure near the end of pump lifespan. Next, alginate was …
-
Kinetic Decay of a Polymer/Ink Complex as an O2 Indicator
… poly(diallyldimethylammonium chloride) (polyDADMAC). Sodium bisulfite (NaHSO<sub>3</sub>) was used as the initial oxygen scavenger and to drive the reduction of the ITS. Studies were predominantly done in solution phase through the dilution of the ink systems. Fluorescence spectroscopy …
-
Investigation of Polymeric Reagents for KCI Collection Furing Potash Flotation
… and six polydiallyldimethylammonium chloride (polyDADMAC) polymers were examined to investigate the feasibility to be used as collectors during potash flotation. It was found that the polyDADMAC polymer, C-592, exhibited a relatively high selectivity for KCl in comparison to the conventional …
-
Functionalized nanoparticles as removable coatings for reverse osmosis membranes
… with polydiallyldimethylammonium chloride (polyDADMAC) to impart a positive charge [TiO,2(+)], titanium dioxide incorporated with polyacrylate to impart a negative charge [TiO2(-)] and silver incorporated with polyacrylate, again to incorporate a negative charge [Ag(-)]. PolyDADMAC was used …
-
Reactive polymer enhanced miscible displacement in porous media
… a porous bed with cationic polymer solution (polyDADMAC) was investigated to determine the mechanisms by which polyDADMAC influenced the miscible displacement. The porous bed consisted of a 1.7 cm diameter central channel of 638 μm glass beads surrounded by an annulus of 121 μm glass beads …
-
Synthese und Charakterisierung neuartiger Cellulosederivate und deren Einsatz als Verkapselungsmaterialien
… in Gegenwart von kationischen Polyelektrolyten (polyDADMAC) die Bildung von Polyelektrolytkomplexen in Form von Kapseln und Folien/Membranen möglich. Die Fähigkeit solcher Polyelektrolytkapseln aus Celluloseethersulat und polyDADMAC zu Verkapselung von Substanzen und deren anschließende …
-
Fundamentals, preparation, and characterization of superhydrophobic wood fiber products
… of polydiallyldimethylammonium chloride (polyDADMAC) and silica particles, followed by a fluorination surface treatment with 1H,1H,2H,2H-perfluorooctyltriethoxysilane (POTS, CF3(CF2)5CH2CH2Si(OC2H5)3). The wood fiber products prepared in this study had contact angles of water greater than …
-
Inkjet printed surface chemistry modification of porous coatings for application as microfluidic analytical platforms
… of poly-diallyl dimethyl ammonium chloride (polyDADMAC) polyelectrolyte. Hydrophobic patterning was successfully conducted with the hydrophobising agents, alkyl ketene dimer (AKD) and polystyrene, with a significant amount of agent required to cover the high area pore surfaces sufficiently. …
-
Polymer-coated bubbles in dissolved air flotation for processing algae-laden water
… from the original strain. Subsequently, polyDADMAC and the best-performing synthesised polymer were trialled using a purpose built DAF pilot plant where they were used to treat algal blooms in a waste stabilisation pond. It was found that the use of polyDADMAC-modified bubbles resulted in …
-
Enhanced Sorption of Perfluoro-alkyl Substances (PFASs) onto Ottawa Sand
… polydiallyldimethyl ammonium chloride (polyDADMAC), and a tannin-based cationic polymer. PFAS adsorption isotherms were determined on Ottawa sand and on aquifer material from a known PFAS-contaminated site. Preliminary results suggest that this method shows promise for in situ …
-
Potential N-Nitrosodimethylamine (NDMA) formation from water treatment polymers
… poly-diallyldimethylammonium chloride (polyDADMAC) and polyamine polymers were evaluated in reactions with nitrite, free chlorine, monochloramine or chlorine dioxide in aqueous solutions at circumneutral pH and room temperature conditions. This study employed high dosages of polymer and …
-
Synthesis and Characterization of Graft Polyelectrolytes
… polyacrylamide, low and high molecular weigh polyDADMAC, and a commercial random copolymer of acrylamide and DADMAC. It was found that both the amount of charge and gel is very important in flocculation performance. However, the testing of the copolymers as a conditioner for a municipal sludge …
-
Novel conducive alkaline polymer membranes for fuel cells
… soluble, poly(diallyldimethylammonium chloride) (polyDADMAC) proved to be ineffective due to the inability to render the materials insoluble in water. Selected membranes (based on ionic conductivity and stability) were tested for water electrolysis applications, with some of the membranes showing …
-
Effect of amine-based water treatment polymers on the formation of N-nitrosodimethylamine (NDMA) disinfection by-product
… mechanisms of NDMA formation from polyamine and PolyDADMAC, (4) Effect of water treatment processes on NDMA formation from amine-based water treatment polymers, and (5) Developing strategies to reduce polymers NDMA formation potential. Direct chloramination or chlorination of high doses of …
-
Accessible Pretreatment Method and PFAS Analysis Using the Low-Cost Methylene Blue Active Substances Test
… with polydiallyldimethylammonium chloride (polyDADMAC), ferric chloride, and aluminum sulfate. Greatest partitioning into the solid phase occurred in that order. Since PFAS separation would occur in CCW after coagulation, less partitioning is more desirable. The second phase of this research …
-
Free Radical Polymerization of N-Vinylformamide and Novel Comb-structure Polyelectrolytes
… method, poly diallydimethyl ammonium chloride (polyDADMAC) was grafted onto polyacrylamide (PAM) using a mini-mixer in melts with an organic peroxide, Lupersol 130. This process resembled reactive processing usually carried out at a larger scale in extruders to handle highly viscous polymer …
-
A Mixed Cation and Anion Exchange Resin System for the Simultaneous Removal of N-Nitrosodimethylamine and Trihalomethanes Precursors from Water
… and poly(diallyldimethylammonium chloride) (polyDADMAC) and dissolved organic carbon (DOC) levels around 2 mg/L.
-
Application of Molecular Interactions for Bio-separations and Drug Discovery
… conducted onChlorella sorokiniana,the ability of polyDADMACtodewater and extract cellular debris, lipids, and pigments to the hexane phase while retaining protein fraction in the aqueous phase was investigated. It was observed that different components could be migrated from one phase to the other …
-
O/W Emulsion Stabilised with Clay Particles and Anionic Surfactant as an Oily Sludge Model: Preparation, Characterization and Destabilization with Natural and Synthetic Polyelectrolytes
… Commercial natural (chitosans), synthetic (PolyDADMACs) polyelectrolytes and oilbreaks as well as lab-scale semi-synthetic polymers (modified chitosans) were tested. The flocculation efficiency was determined based on the amount and quality of water that was recovered as well as on the floc …
Page 1 of 2