Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 260 for “"Polyacrylonitrile"”.

  1. Fundamental Studies of Stabilization of Polyacrylonitrile Precursor

    … this study was to examine the stabilization of polyacrylonitrile precursor. Currently, the stabilization of polyacrylonitrile is the limiting step in the production of carbon fibers because of its cost and time requirements. By furthering the understanding of the stabilization process, it may be …

    ut-knoxville Repository record for Fundamental Studies of Stabilization of Polyacrylonitrile Precursor (opens in a new tab)

  2. Fatigue of carbon nanotube-loaded polyacrylonitrile fibers

    The effects of loading polyacrylonitrile (PAN) single fibers with carbon nanotubes (CNTs) on mechanical damage accumulation processes are explored in this thesis. Tensile, fatigue, and creep experiments were conducted to establish the effects of CNTs on the strength, fatigue lifetime, and …

    gatech Repository record for Fatigue of carbon nanotube-loaded polyacrylonitrile fibers (opens in a new tab)

  3. Single Wall Carbon Nanotube/Polyacrylonitrile Composite Fiber

    … mechanical, electrical and thermal properties. Polyacrylonitrile (PAN) is an important fiber for textiles as well as a precursor for carbon fibers. PAN has been produced since 1930s. In this study, we have processed SWNT/PAN fibers by dry-jet wet spinning. Purified SWNT, nitric acid treated …

    gatech Repository record for Single Wall Carbon Nanotube/Polyacrylonitrile Composite Fiber (opens in a new tab)

  4. Polyacrylonitrile hollow fibre membranes for gas separation

    Polyacrylonitrile (PAN) hollow fibres have been spun by a dry-jet wet spinning technique, using a commercial PAN polymer (Courtelle) redissolved in dimethylformamide (DMF). After failure to produce satisfactory porous hollow fibres from PAN/DMF solutions, a series of studies on the porous …

    whiterose Download PDF for Polyacrylonitrile hollow fibre membranes for gas separation (opens in a new tab)

  5. Polyacrylonitrile-based Hierarchical Porous Carbons for Supercapacitors

    … composite materials were fabricated by using polyacrylonitrile as carbon precursor for a tailored step-by-step pore forming method, including phase inversion, CaCO3 activation and KOH activation. The materials were thoroughly characterized by XRD, SEM, TEM, BET, XPS and Raman spectroscopy to …

    qucosa-diss

  6. The Interaction of Nitrogen Monoxide with Pyrolysed Polyacrylonitrile

    … work was concerned with depositing a film of polyacrylonitrile from solution onto a pelletised alumina support and converting this into a supported PAN.P catalyst having optimum NO removal activity. Kinetic studies indicated that at soo⁰c, 5,170 x 10-10 moles s-1m-2 of NO were removed when …

    aston Download PDF for The Interaction of Nitrogen Monoxide with Pyrolysed Polyacrylonitrile (opens in a new tab)

  7. The Thermal Degradation of Polymer Blends of Polyacrylonitrile

    … and polymer blends. The thermal degradation of polyacrylonitrile and of blends of polyacrylonitrile and polymethylmethacrylate is studied in detail in Chapter 3. The decomposition of polymethylmethacrylate is shown to undergo significant changes upon blending. The effect has been found to vary …

    glasgow Download PDF for The Thermal Degradation of Polymer Blends of Polyacrylonitrile (opens in a new tab)

  8. Carbon nanotube reinforced polyacrylonitrile and poly(etherketone) fibers

    … is mainly focused on MWNT and CNF reinforced polyacrylonitrile (PAN) composite fibers, and SWNT, FWNT, and MWNT reinforced poly(etherketone) (PEK) composite fibers. To the best of our knowledge, this is the first study to report the spinning of 20% MWNT or 30% CNF reinforced polymer fiber spun …

    gatech Repository record for Carbon nanotube reinforced polyacrylonitrile and poly(etherketone) fibers (opens in a new tab)

  9. High strength carbon nanofibers derived from electrospun polyacrylonitrile

    Carbon nanofibers (CNFs) derived from polyacrylonitrile (PAN) have not yet demonstrated the high tensile strength and Young’s modulus of their microscale counterparts. This is due to the current lack of understanding of the effect of electrospinning conditions on the quality of PAN precursor …

    uiuc Repository record for High strength carbon nanofibers derived from electrospun polyacrylonitrile (opens in a new tab)

  10. Preparation and Properties of Electrospun Polyacrylonitrile Fiber Assemblies

    … was presented through the preparation of 1D polyacrylonitrile (PAN) fibers by yarn electrospinning, which creates fibers consisting of thousands of aligned fibrils in combination with a specified amount of a interconnecting linker – poly(ethylene glycol) bisazide (PEG-BA) (Section 2.1). …

    bayreuth Repository record for Preparation and Properties of Electrospun Polyacrylonitrile Fiber Assemblies (opens in a new tab)

  11. UV-Assisted Stabilization of Polyacrylonitrile-Based Carbon Fiber Precursors

    … of an alternative, rapid stabilization route for polyacrylonitrile (PAN) precursor-based carbon fibers. The main goal was to investigate the stabilization reactions induced by the addition of photo-initiators and UV-treatment of polyacrylonitrile (PAN) based precursors. Also, the role of this …

    clemson Repository record for UV-Assisted Stabilization of Polyacrylonitrile-Based Carbon Fiber Precursors (opens in a new tab)

  12. FABRICATION AND MODIFICATION OF POLYACRYLONITRILE MEMBRANES FOR ORGANIC SOLVENT NANOFILTRATION

    … cross-linking and modification of several polyacrylonitrile (PAN) based membranes in both the hollow fiber and flat sheet configurations for use in OSN. Firstly, ultrafiltration PAN hollow fibers with a sponge-like morphology and minimal macrovoids were fabricated by adjusting the dope …

    nus Repository record for FABRICATION AND MODIFICATION OF POLYACRYLONITRILE MEMBRANES FOR ORGANIC SOLVENT NANOFILTRATION (opens in a new tab) Download file for FABRICATION AND MODIFICATION OF POLYACRYLONITRILE MEMBRANES FOR ORGANIC SOLVENT NANOFILTRATION (opens in a new tab)

  13. Fabrication and characterization of polyvinylpyrrolidone and polyacrylonitrile electrospun nanocomposite fibers

    … were produced using polyvinylpyrrolidone (PVP), polyacrylonitrile (PAN), multiwall carbon nanotubes (MWCNTs), and Ni0.6Zn0.4Fe2O4 (NiZn ferrites) nanoparticles, and their physical properties, such as electrical, dielectrical, thermal, acoustic, and magnetic were determined. In this dissertation, …

    wichita-thes Repository record for Fabrication and characterization of polyvinylpyrrolidone and polyacrylonitrile electrospun nanocomposite fibers (opens in a new tab)

  14. Development of sulfur-polyacrylonitrile/graphene composite cathode for lithium batteries

    … carbonaceous materials. Noteworthy, sulfur-polyacrylonitrile (SPAN) composites, wherein sulfur is chemically bond to the polymer backbone and PAN acts as a conducting matrix, have shown some success in suppressing the shuttle effect. However, due to the limited electrical conductivity of …

    waterloo Repository record for Development of sulfur-polyacrylonitrile/graphene composite cathode for lithium batteries (opens in a new tab)

  15. Synthesis and characterisation of polyacrylonitrile and its derived carbon materials

    Carbon is a versatile material which is composed of different allotropes, and also come in with different structures. Carbon nanofibres (CNFs) is one dimensional carbon nanomaterials, which have exhibited superior mechanical properties, great specific area, good electrical conductivity, good …

    aston Download PDF for Synthesis and characterisation of polyacrylonitrile and its derived carbon materials (opens in a new tab)

  16. Sulfurized Polyacrylonitrile Solid State Lithium Batteries Using Gel Polymer Interlayers

    … constructed with lithium metal and sulfurized polyacrylonitrile. Three different structures were tested. It was found that the addition of MIEC helped create long lasting cells with 80% capacity retention after 303 cycles.

    maryland Repository record for Sulfurized Polyacrylonitrile Solid State Lithium Batteries Using Gel Polymer Interlayers (opens in a new tab)

  17. Polyacrylonitrile/carbon nanotube composite fibers: reinforcement efficiency and carbonization studies

    Polyacrylonitrile (PAN)/carbon nanotube (CNT) composite fibers were made using various processing methods such as conventional solution spinning, gel spinning, and bi-component gel spinning. The detailed characterization exhibited that the smaller and longer CNT will reinforce polymer matrix mostly …

    gatech Repository record for Polyacrylonitrile/carbon nanotube composite fibers: reinforcement efficiency and carbonization studies (opens in a new tab)

Page 1 of 13