Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 613 for “"Polyamide"”.
-
Permeation of pure gases through polyamide membranes and laminated polyamide membranes.
Asymmetric polyamide membranes of different porosities were prepared by varying the oven evaporation times. Permeation rates of hydrogen, helium, methane, nitrogen, oxygen, and carbon dioxide, for pressures between 345 and 2068 kPa, were measured for the above membranes and for the same membranes …
-
Functional nanoporous polyamide aerogels
… framework was a statistical co-polymer of polyamide, polyurea and polyimide. Stepwise pyrolytic decomposition followed by reactive etching of those components yielded microporous carbon aerogels with good gas sorption selectivities that may find application in CO2 capture and …
-
Additive manufacturing using polyamide-12 /
… Laurynas Peciukonis ADDITIVE MANUFACTURING USING POLYAMIDE-12 Selective laser sintering even being quite an old additive manufacturing technology, remains quite expensive to this day, due to the higher complexity of the equipment construction than comparing it to other additive manufacturing …
-
Polyamide-imide and Montmorillonite Nanocomposites
… suspensions of a high performance polymer, Polyamide-imide (PAI) are widely used in magnetic wire coatings. Here we investigate the effect that the introduction of montmorillonite (MMT) has on PAI. MMT was introduced into an uncured PAI suspension; the sample was then cured by step-wise heat …
-
Bioplastic blends incorporating polyamide-11
Includes bibliographical references.
-
Chain Extension of Polyamide-6 & Polyamide-6/Organoclay Nanocomposites. Control of thermal degradation of polyamide-6/organoclay nanocomposites during extrusion using a novel chain extender
Novel solutions to offset thermal degradation of polyamide-6 (PA-6) and organoclay (organically modified layered silicates) nanocomposites during melt compounding have been investigated. In this research, a novel chain extender (Joncryl ADR 3400) has been used to improve thermal stability of PA-6 …
-
Chain Extension of Polyamide-6 & Polyamide-6/Organoclay Nanocomposites. Control of thermal degradation of polyamide-6/organoclay nanocomposites during extrusion using a novel chain extender
Novel solutions to offset thermal degradation of polyamide-6 (PA-6) and organoclay (organically modified layered silicates) nanocomposites during melt compounding have been investigated. In this research, a novel chain extender (Joncryl ADR 3400) has been used to improve thermal stability of PA-6 …
-
Rubber toughening of an amorphous polyamide
Rubber toughening of an amorphous polyamide (Zytel 330 from DuPont), a-PA, using various maleated elastomers via standard notched Izod impact testing was investigated and the results were compared and contrasted with those of nylon 6. These elastomers used include a triblock copolymer, hydrogenated …
-
Thermal conductivity measurements of polyamide powder
… Thermal conductivity measurements of pure polyamide 12 and polyamide11 with multi-wall carbon nanotubes were conducted based on transient plane source technology using a Hot Disk® TPS500 conductivity measurement device. Polyamide powder was packed to three different densities in nitrogen at …
-
Thermo-Mechanical Analysis of Polyamide Biocomposites
… of agricultural byproducts as fillers in polyamides, while minimizing the effects of increased processing temperatures. Torrefaction has been identified as an effective means of preparing biomass for introduction into polyamide. Polyamide biocomposites were produced and shown to have …
-
Modified polyamide fiber for arsenic adsorption
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI-COLUMBIA AT AUTHOR'S REQUEST.] In the United States, China, Bangladesh, India and many other countries in the world, arsenic (As) existing in some drinking water supplies has caused serious health concerns because of the carcinogenic nature of As. US …
-
Enzymatic treatment of polyamide 6.6 fibres
The controlled hydrolysis of polyamide fibres surfaces leads to the formation of amino and carboxylic end groups. The presence of these groups improves hydrophilicity and creates further starting points for covalent bonding of certain compounds. The coupling of flame retardants, proteins and other …
Page 1 of 31