Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 440 for “"Polycaprolactone"”.
-
Ageing and crystallisation of polycaprolactone
Partially crystalline polycaprolactone stored at different temperatures well above the glass transition temperature is found to age with the development of further crystallinity and an increase in melting point, yield stress and elastic modulus with time. The changes in mechanical properties are …
-
Peracetic Acid Sterilization of Electrospun Polycaprolactone Scaffolds
Sterilization of tissue engineered scaffolds is an important regulatory issue and is at the heart of patient safety. With the introduction of new biomaterials and micro/nano structured scaffolds, it is critical that the mode of sterilization preserve these built-in features. Conventional …
-
Electrospun Polycaprolactone Nanofiber Scaffolds for Tissue Engineering
… we used for scaffold fabrication is a polymer, polycaprolactone (PCL). We discovered that the electrospun PCL nanofibers are highly hydrophobic, unsuitable for cell growth. The treatment of PCL electrospun nanofibers with oxygen plasma treatment endowed the fibers with hydrophilic property, …
-
Characterization of Fibrin Matrix Incorporated Electrospun Polycaprolactone Scaffold
Specific objective: Guided tissue regeneration (GTR) aims to regenerate the lost attachment apparatus caused by periodontal disease through the use of a barrier membrane. For the GTR procedures to be successful, barrier membranes are required to be present at the surgical site for an extended …
-
Polycaprolactone nanowire surfaces as interfaces for cardiovascular applications
Cardiovascular disease is the leading killer of people worldwide. Current treatments include organ transplants, surgery, metabolic products and mechanical/synthetic implants. Of these, mechanical and synthetic implants are the most promising. However, rejection of cardiovascular implants continues …
-
BIOFILM FORMATION ON CARBON NANOTUBE/POLYCAPROLACTONE NANOCOMPOSITE COATED SURFACES
… of microorganisms to a surface, on CNT/polycaprolactone (PCL) nanocomposite coated surfaces. For investigation of biofilm developing processes on both PCL and CNT/PCL nanocomposite coated surfaces and exploration of possible formation mechanisms, Pseudomonas.aeruginosa wild type was used …
-
Encapsulation of nanomagnetite within polycaprolactone microspheres for bone replacement
… combining magnetite nanoparticles with polycaprolactone (PCL) to produce a material that can soften in response to the application of an alternating magnetic field. The magnetite nanoparticles were synthesized by a non-surfactant method and then emulsified with PCL. Particle size …
-
Multifunctional polycaprolactone/graphene oxide nanocomposite coatings for metal implants
… nanocomposite coating composed of polycaprolactone (PCL) and graphene oxide (GO) to control Mg alloy (AZ31) degradation while enabling drug delivery and photothermal therapy. The initial phase involved coating 316L stainless steel (316L SS) as a stable demonstrator substrate. PCL/GO …
-
Electrospinning lecithin-polycaprolactone scaffolds with gold nanoparticles for osteoarthritis prevention
… nanoparticles, soy lecithin, and the polymer polycaprolactone (PCL). Soy lecithin and PCL solutions were electrospun to develop a unique nonwoven mat for OA. The electrospinning parameters were optimized to achieve different solution ratios for the best fiber formation. Different …
-
Supercritical CO2 foamed biodegradable polymer blends of polycaprolactone and Mater-Bi.
… CO2 so blended with another polymer which is. Polycaprolactone is a biopolymer with potential of 4000% change in volume with CO2. Thus we investigate blends of Mater-Bi (MB) and polycaprolactone (PCL) foamed in supercritical CO2 using the batch process. Characterization of the foamed and …
-
Polycaprolactone and poly(glycerol) sebacate polyHIPEs for regeneration of osteochondral defects
… in Chapter II. iii) The third chapter discusses polycaprolactone methacrylate (PCLMA) as a candidate for the formation of porous structures through emulsion templating (polyHIPEs), with a special focus on the chemical and mechanical characterisation of the material, as well as the study of their …
-
Effects of incorporating polycaprolactone and flax fiber into glycerol-plasticized pea starch
… was to determine the effects of incorporating polycaprolactone (PCL) and flax fiber into glycerol-plasticized pea starch. The effects of processing moisture content on the physical properties of glycerol-plasticized pea starch were also evaluated. The physical properties investigated included …
-
3D Printed Polycaprolactone/Nano-Hydroxyapatite Scaffolds for Bone Tissue Engineering In-Vitro
… have been performed on scaffolds printed from polycaprolactone/hydroxyapatite (PCL/HAp) due to the synergistic properties of PCL and HAp for BTE. Notably, conflicting reports on the development (design and printing) of scaffold structures for desired performance, in terms of mechanical …
-
3D Printed Polycaprolactone/Nano-Hydroxyapatite Scaffolds for Bone Tissue Engineering In-Vitro
… have been performed on scaffolds printed from polycaprolactone/hydroxyapatite (PCL/HAp) due to the synergistic properties of PCL and HAp for BTE. Notably, conflicting reports on the development (design and printing) of scaffold structures for desired performance, in terms of mechanical …
-
Electrospun polycaprolactone scaffolds: mechanical properties, alignment quantification, and topology induced gene expression
… increase cell proliferation compared to 100% polycaprolactone scaffolds. Additionally, it was found that fibroblasts on aligned scaffolds express genes related to actin production, actin polymerization, and focal adhesion assembly at higher levels than fibroblasts on randomly oriented …
-
Evaluation of modulus of polycaprolactone fused deposition modeling 3D printed tissue scaffolds
… In this study scaffolds were printed using polycaprolactone with a molecular weight ranging from 55,000 to 150,000 in an effort to determine the effect of molecular weight on the modulus of the printed scaffold. Scaffolds were printed using a hobbyist level printer with filament produced on …
-
An Evaluation of the Effects of the stiffness of Polycaprolactone on cell Proliferation
The effects of the stiffness of a biomaterial, Polycaprolactone (PCL) has on cell proliferation were evaluated by FDA/PI staining, focal adhesion and actin cytoskeleton staining, MTT assays as well as alamarBlue assays. It has been shown that 3T3 cells, belonging to a soft tissue cell type, …
Page 1 of 22