Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 711 for “"Polycarbonate"”.
-
Formability of Polycarbonate
… investigation of a cold forming technique for polycarbonate. The objective of this work is to characterize the bulk deformation behaviour of polycarbonate using tensile tests and dome stretch forming tests. Two different molecular weight polycarbonate sheets with 1.6 mm thickness were studied: …
-
Transparent Superhydrophobic Polycarbonate Coating
… coating using a transparent polymer such as Polycarbonate (PC) as a matrix . Functionalized aerogel particles are broken down to nanosized particles by milling and sonication, and added into solution with PC. This solution is then applied on various substrates such as quartz and silicon …
-
Glass reinforcement of recycled polycarbonate
… obtained from end-of-life electronics, typically polycarbonate (PC) and acrylonitrile-butadiene-styrene (ABS). It is shown that impact strength and elongation-to-break in a tensile test are the two mechanical properties that are most sensitive to the presence of impurities in PC. On adding short …
-
Characterization of Conductive Polycarbonate Films
… film. The potential of iodine-doped bisphenol-a polycarbonate films containing bis(ethylenedioxy)-tetrathiafulvalene (BEDO-TTF) dye for sensor applications will be tested through characterization of the films at various stages of their fabrication using Atomic Force Microscopy (AFM), Transmission …
-
Thermal Degradation Studies of Polycarbonate
… The current study focuses on bisphenol A polycarbonate and tracks changes in the properties of this material as a function of the degree of degradation, t. For the purposes of the present research, the environmental effects have been limited to those associated with elevated temperature, …
-
Advanced Antireflective Coatings for Polycarbonate Substrates
… antireflective coatings are deposited on polycarbonate ophthalmic flats using a combination of deposition methods: matrix assisted pulsed laser evaporation (MAPLE) and magnetron sputtering. The coatings are modeled to minimize reflectance and maximize transmission of visible spectrum …
-
Polymer Crystallization: Polycarbonate and Polybutene-1
The crystallization of polycarbonate from the glassy state was examined using thin ($\sim$1000A), solution cast films and thicker (0.16 and 1.5 mm) compression molded films. A detailed study of the crystallization process in the thin films, as observed by transmission electron microscopy, revealed …
-
Characterization of Crazing Properties of Polycarbonate
… was to characterize the craze growth behavior of polycarbonate (PC) as a function of stress level, model the residual mechanical properties of PC at various craze levels and strain rates, and determine if the total surface area of crazing is the sole factor in residual properties or if the crazing …
-
Polycarbonate-silsesquioxane and polycarbonate-siloxane nanocomposites: synthesis, characterization, and application in the fabrication of porous inorganic films
Three types of poly(norbornane carbonate) or PNC oligomers were synthesized and characterized via spectroscopic methods and elemental analyses to validate their chemical structures. Using the results from proton nuclear magnetic resonance (1H NMR) experiments, the degree of polymerization and size …
-
The Ductile to Brittle Transition in Polycarbonate
… the ductile to brittle failure transition in polycarbonate. The cohesive zone model is motivated by experimental evidence that two different critical energies per unit area of crack growth exist in glassy polymers. A higher energy state is associated with ductile failure (slow crack growth), …
-
Photoacid Generators for Catalytic Decomposition of Polycarbonate
It is the goal of this body of work to research an assortment of different photoacid generators (PAGs) and quantify their ability to perform the decomposition of poly(propylene carbonate) (PPC). Adding PAGs to PPC allows for a decreased polymer decomposition temperature, which can in turn be used …
-
Long glass fiber embedment in polycarbonate thermoplastic
… on the mechanical property of hardness of a polycarbonate (thermoplastic) matrix, to achieve an 80% glass loading to a 20% wet-out for the polycarbonate pre-impregnated rod, to develop the prototype pultrusion equipment for polycarbonate pre-impregnated rod, and to develop the prototype …
-
Accelerated Durability Characterization of Laminated Polycarbonate Systems
… laminates, which often involve sheets made of polycarbonate. This study aims to explore the durability of laminated polycarbonate systems by investigating the interaction of environment and TPU viscoelastic behavior on the time-dependent crack growth in these laminates. The main test utilized …
-
Crack nucleation on V-notched PMMA and Polycarbonate
… geometry for Polymethylmethacrylate (PMMA) and Polycarbonate (PC). V-notched geometries are known to have their specific notch stress intensity factor depending on the V-notch angle and the depth of the V-notch itself. It is crucial to understand the relationship between the stress concentration …
-
Investigating Polycarbonate Welds made with Fused Filament Fabrication
Fused Filament Fabrication (FFF) offers low cost, rapid production times, and greater design flexibility than traditional manufacturing methods like injection molding. The primary drawback of FFF parts is their high variability and reduced mechanical, and fracture properties relative to injection …
-
Cellulose – Polycarbonate Nanocomposites: A novel automotive window alternative
… (such as polyesters, polyamides and polycarbonates) due to its high mechanical strength and aspect ratio – being compared with reinforcements like steel and carbon nanotubes. In order to maintain its strength when compounded with thermoplastics, the high-temperature processing must …
Page 1 of 36