Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 120 for “"Polyethersulfone"”.

  1. Polyethersulfone Infusion Filters During Pharmacotherapy in Neonatology

    Einleitung: Der Kontext für eine effektive intravenöse Pharmakotherapie in der Neonatologie ist komplex: Neben off-lable Verordnungen, der intraindividuellen physiologischen Unterschiede innerhalb dieser vulnerablen Patientengruppe kommen die durch die physikochemische Eigenschaften bedingten …

    qucosa-diss

  2. Surface modifying macromolecules for enhancement of polyethersulfone pervaporation membrane performance.

    … of this work was to modify the surface of polyethersulfone membranes in order to render them more useful in pervaporation for the removal of volatile organic compounds (VOC) from aqueous solutions. Surface Modifying Macromolecules (SMNs) were designed and developed as surface modifiers of …

    ottawa-retro Repository record for Surface modifying macromolecules for enhancement of polyethersulfone pervaporation membrane performance. (opens in a new tab)

  3. Surface characterization of plasma treated carbon fibers and adhesion to polyethersulfone

    … carbon fibers. The adhesion of carbon fibers to polyethersulfone (PES) was measured by using the microbond pull-out test, and compared to the adhesion of the same fibers to an epoxy resin. The load required to debond the microdroplet was used as a measure of the bond strength. The data were also …

    vt Repository record for Surface characterization of plasma treated carbon fibers and adhesion to polyethersulfone (opens in a new tab)

  4. Development of surface modifying macromolecule blended polyethersulfone membranes for vacuum membrane distillation

    Surface modifying macromolecule (SMM) has been developed aiming at the preparation of membranes with greater surface hydrophobicity and greater chemical resistivity at a lower cost than conventional hydrophobic membranes. Throughout the whole work in this study, the membranes, which contains SMM as …

    ottawa-retro Repository record for Development of surface modifying macromolecule blended polyethersulfone membranes for vacuum membrane distillation (opens in a new tab)

  5. Polyurethane/polyethersulfone dual-layer anisotropic membranes for CO2 removal from flue gas

    … the preparation of dual-layer polyurethane/polyethersulfone membranes using the co-casting technique and the effects of the evaporation time and the temperature of the coagulation water bath on the membrane morphology are evaluated. Uniform layers with excellent adhesion are obtained. Also, …

    brazil-uerj Repository record for Polyurethane/polyethersulfone dual-layer anisotropic membranes for CO2 removal from flue gas (opens in a new tab)

  6. Impact of manufacturing conditions of polyethersulfone membranes on final characteristics and fouling reduction

    … the membrane characteristics and performance of polyethersulfone (PES) membranes. As it was necessary to test numerous membrane coupons prepared under many different conditions, during the first stage of this study a membrane test protocol was established. Small test cells gave very similar …

    ottawa-retro Repository record for Impact of manufacturing conditions of polyethersulfone membranes on final characteristics and fouling reduction (opens in a new tab)

  7. Effects of Background Ions on Polyethersulfone (Pes) Membrane Fouling by Natural Organic Matter (Nom)

    "Hence, NOM aggregation was experimentally evaluated by dynamic light scattering measurements with SRNOM. These tests showed that calcium caused formation of supramolecular NOM clusters. Large-scale MD simulations with multiple NOM molecules were then performed to probe possible formation of …

    uiuc Repository record for Effects of Background Ions on Polyethersulfone (Pes) Membrane Fouling by Natural Organic Matter (Nom) (opens in a new tab)

  8. Synthesis polyethersulfone-based amphiphilic block copolymers & development of single-ion conductors for lithium ion batteries

    ABSTRACTSYNTHESIS OF POLYETHERSULFONE-BASED AMPHIPHILIC BLOCK COPOLYMERS & DEVELOPMENT OF SINGLE ION CONDUCTORS FOR LITHIUM ION BATTERIESByHui Zhao Polyethersulfone (PES) membranes often foul easily because of their hydrophobicity, and addition of amphiphilic PES block copolymers to membrane …

    msu Repository record for Synthesis polyethersulfone-based amphiphilic block copolymers & development of single-ion conductors for lithium ion batteries (opens in a new tab)

  9. Preparation and performance testing of sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) - polyethersulfone thin film composite membranes.

    … were prepared by coating the surface of polyethersulfone ultrafilnation membranes with dilute solutions of sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) polymer. Poly(2,6-dimethyl-1,4-phenylene oxide) was first sulfonated to different degrees, thus obtaining polymers of different ion …

    ottawa-retro Repository record for Preparation and performance testing of sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) - polyethersulfone thin film composite membranes. (opens in a new tab)

  10. Chemically Stabilized Oil-in-water Emulsion Separation Using a Custom Aquaporin-based Polyethersulfone (PES) Forward Osmosis Membrane System

    The stability of oil-in-water emulsions is enhanced by the presence of surfactants in the water, thereby increasing difficulty of remediation. In this study, mineral oil and a standard bilge mix (SBM) were used as model oils for forward osmosis (FO) performance evaluation and two different …

    ucf Repository record for Chemically Stabilized Oil-in-water Emulsion Separation Using a Custom Aquaporin-based Polyethersulfone (PES) Forward Osmosis Membrane System (opens in a new tab)

  11. DPD Guided Insight on the Formation Process of Polyethersulfone Membranes by Nonsolvent Induced Phase Separation and the Effects of Additives

    … layer in response to the decreasing solubility. Polyethersulfone (PES), a common industrial choice we have previously studied, was utilized as the polymer with N-methyl-2-pyrrolidone (NMP) as the organic solvent and water as the coagulation bath. In this study, our previous model construction was …

    arkansas Repository record for DPD Guided Insight on the Formation Process of Polyethersulfone Membranes by Nonsolvent Induced Phase Separation and the Effects of Additives (opens in a new tab)

  12. Evaluation of novel polyethersulfone membranes incorporating charged surface modifying macromolecules for the removal of pharmaceuticals and endocrine disrupting compounds from drinking water

    Recently, there has been an increased concern of the potential effects of pharmaceuticals, personal care products (PPCPs) and endocrine disrupting compounds (EDCs) in drinking water. Their presence in surface waters has resulted in the skewing of sex ratios in aquatic biota and the effect on …

    ottawa-retro Repository record for Evaluation of novel polyethersulfone membranes incorporating charged surface modifying macromolecules for the removal of pharmaceuticals and endocrine disrupting compounds from drinking water (opens in a new tab)

  13. Pervaporation dehydration of isopropanol/water using poly(hema)/poly acrylic acid composite membranes.

    … selective layer on top of polyacrylonitrile and polyethersulfone porous substrate membranes, to perform dehydration of isopropyl alcohol by pervaporation. In order to achieve the best performance, membranes were prepared under many casting variables including casting solution compositions, number …

    ottawa-retro Repository record for Pervaporation dehydration of isopropanol/water using poly(hema)/poly acrylic acid composite membranes. (opens in a new tab)

  14. DESIGN AND DEVELOPMENT OF PERVAPORATION MEMBRANES FOR DEHYDRATION OF ALCOHOLS

    … membranes are made from 6FDA-HAB/DABA polyimide, polyethersulfone, polyphenylsulfone, trimethylated polyethersulfone, hydrophilic polyethersulfone-co-Pluronic and crosslinked thermally rearranged polybenzoxazole. Mixed matrix membranes (MMMs) consist of UiO-66, UiO-66-NH2, UiO-66-F4 nanoparticles …

    nus Repository record for DESIGN AND DEVELOPMENT OF PERVAPORATION MEMBRANES FOR DEHYDRATION OF ALCOHOLS (opens in a new tab) Download file for DESIGN AND DEVELOPMENT OF PERVAPORATION MEMBRANES FOR DEHYDRATION OF ALCOHOLS (opens in a new tab)

  15. Study of fluorosilicone rubber membrane for pervaporation.

    … rubber coated on top of a porous substrate polyethersulfone membrane. It was found that the performance of the composite membrane was affected by the molecular weight of polyethersulfone used to prepare the porous substrate. The performance of composite membrane became more consistent as the …

    ottawa-retro Repository record for Study of fluorosilicone rubber membrane for pervaporation. (opens in a new tab)

  16. Evaluation of novel polyethersulfone membranes developed using charged surface modifying macromolecules for the removal of pharmaceutically active compounds and endocrine disrupting compounds from drinking water

    The increasing concern over potential health effects of pharmaceutically active compounds (PhACs) and endocrine disrupting compounds (EDCs) in drinking water has led to an increase in assessment of drinking water treatment plant efficiencies at removing these emerging micropollutants. For the most …

    ottawa-retro Repository record for Evaluation of novel polyethersulfone membranes developed using charged surface modifying macromolecules for the removal of pharmaceutically active compounds and endocrine disrupting compounds from drinking water (opens in a new tab)

Page 1 of 6