Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 58 for “"Polymer Concrete"”.

  1. New Generation Polymer Concrete Incorporating Carbon Nanotubes

    Polymer Concrete (PC) is one of three types of polymers in concrete that was introduced in the 1950s and has had many successful civil engineering applications. PC is recognized in the industry as a mix of aggregate and polymer resin with no Portland cement. PC has been favoured over conventional …

    unm Repository record for New Generation Polymer Concrete Incorporating Carbon Nanotubes (opens in a new tab)

  2. Mechanical Characterization of Polymer Concrete with Nanomaterials

    … of conventionally used bulk materials. Polymer Concrete (PC) where epoxy polymer binders replace cement binders, has become a common repair material among many other application and often can be considered an alternative to Portland cement concrete (PCC). PC is often used in bridge deck …

    unm Repository record for Mechanical Characterization of Polymer Concrete with Nanomaterials (opens in a new tab)

  3. Flexural Creep Behavior of Polymer Concrete Systems

    The creep of polymer concrete (PC) systems based on unsaturated polyester/styrene and versamid-cured epoxy resins was investigated using PC systems with different resin and aggregate contents, as well as the unfilled resins respectively. In both polyester and epoxy PC systems data was obtained at …

    rice Repository record for Flexural Creep Behavior of Polymer Concrete Systems (opens in a new tab)

  4. Synergistic fillers in polymer concrete : new composites

    … burning and mechanical properties of polymer portland cement concrete(PPCC).</p><p>Fine grains of hydrous calcium sulfate, Trihydrated alumina, Calcium carbonate and fibrous unhydrous calcium sulfate were examined in PPCC. It has been observed that these synergistic filler improves the …

    njit Repository record for Synergistic fillers in polymer concrete : new composites (opens in a new tab)

  5. Polyester Polymer Concrete for Bridge Deck Overlays

    … a synthesis of information about polyester polymer concrete (PPC) from the literature; 2) conduct a scanning tour to observe PPC construction, inspect in-service PPC overlays, and discuss topics related to PPC; 3) revise the existing Utah Department of Transportation (UDOT) PPC …

    byu Repository record for Polyester Polymer Concrete for Bridge Deck Overlays (opens in a new tab) Download PDF for Polyester Polymer Concrete for Bridge Deck Overlays (opens in a new tab)

  6. Nondestructive Evaluation of Plain and Polymer Concrete

    Nondestructive measurement of the concrete strength is an important topic of research. Among different nondestructive testing (NDT) methods the ultrasonic pulse velocity (UPV) technique is the most popular method for concrete strength estimation. The device which is commonly used for finding this …

    arizona-thes Repository record for Nondestructive Evaluation of Plain and Polymer Concrete (opens in a new tab)

  7. 3D PRINTED CONCRETE & POLYMER CONCRETE FOR INFRASTRUCTURE APPLICATIONS

    … technologies worldwide. Three-dimensional concrete printing (3DCP) has developed an increasing interest in the last decade due to its prospects as a transformative technology for industries such as the concrete precast. Besides the improvements in automation technologies in construction, …

    unm Repository record for 3D PRINTED CONCRETE & POLYMER CONCRETE FOR INFRASTRUCTURE APPLICATIONS (opens in a new tab)

  8. Acoustic Black Hole Structures Using 3D-printed Polymer Concrete

    … beam theory, elastic modulus variation in polymer concrete (PC) enabled wave velocity reduction without compromising fatigue resistance. The high strength, excellent damping, and rheological properties of PC makes it ideal for 3D-printed ABH structures. This work examined bond performance …

    unm Repository record for Acoustic Black Hole Structures Using 3D-printed Polymer Concrete (opens in a new tab)

  9. Seismic performance of flax fibre reinforced polymer–concrete structures

    … composite structure (i.e. flax fibre reinforced polymer (FFRP) confined coconut fibre reinforced concrete (CFRC) structure (FFRP-CFRC)) was developed. The use of FFRP as formwork for the CFRC core increases the strength of the FFRP-CFRC composite. To further reduce the mass of the composite, …

    auckland-ms Repository record for Seismic performance of flax fibre reinforced polymer–concrete structures (opens in a new tab)

  10. Investigation of a polymer concrete composite material for runway applications

    … cloth layers as flexural reinforcement for polymer concrete was investigated. The influences of resin systems, cloth, aggregate, fine fillers, moisture content of aggregate, and specimen depth on the properties of the composite material were studied. The laboratory investigation was oriented …

    rice Repository record for Investigation of a polymer concrete composite material for runway applications (opens in a new tab)

  11. Behavior of joints using reinforced polymer concrete under seismic loading

    … in the joint region: normal, high strength and polymer concrete. Half of the specimens contained 1.5 percent by volume of hooked end fibers. The study of the behavior of these beam column joints has indicated 2 cases of failures: a critical region in which the inelastic behavior was controlled …

    njit Repository record for Behavior of joints using reinforced polymer concrete under seismic loading (opens in a new tab)

  12. Exploring Fiber-Reinforced Polymer Concrete for Accelerated Bridge Construction Applications

    … as possible. The use of fiber-reinforced polymer concrete (FRPC) was explored as a closure pour material for bridges to connect adjacent precast superstructure elements. Polymer concretes have been used successfully as a non-structural overlay material in transportation systems for many …

    washington Repository record for Exploring Fiber-Reinforced Polymer Concrete for Accelerated Bridge Construction Applications (opens in a new tab)

  13. Physical and mechanical properties of a new type of polymer concrete

    <p>A new type of Polymer concrete is an admixture of a special Latex, Portland cement and Sand. It has high bond strength, quick curing, durability and adequate strength. The Mechanical and Physical properties were investigated in this paper. Reinforcement with Glassfiber was done and its …

    njit Repository record for Physical and mechanical properties of a new type of polymer concrete (opens in a new tab)

  14. Evaluation of Polyester Polymer Concrete Overlays on Bridge Decks in Utah

    … was to evaluate the condition of polyester polymer concrete (PPC) overlays placed on both new and in-service concrete bridge decks in Utah. The procedures for this research included a desktop review of 80 bridges with PPC deck overlays; scanning of nine decks using rapid automated sounding …

    byu Repository record for Evaluation of Polyester Polymer Concrete Overlays on Bridge Decks in Utah (opens in a new tab) Download PDF for Evaluation of Polyester Polymer Concrete Overlays on Bridge Decks in Utah (opens in a new tab)

  15. Cost Comparison of Cement Concrete and Polymer Concrete Manholes in Sewer Systems

    Cement concrete manholes are generally used in sewer networks in the United States. However, these concrete manholes are highly vulnerable to chemical corrosion and require frequent maintenance and replacement. Polymer concrete manholes as a substitute to the cement concrete manholes in water and …

    unlv Repository record for Cost Comparison of Cement Concrete and Polymer Concrete Manholes in Sewer Systems (opens in a new tab) Download PDF for Cost Comparison of Cement Concrete and Polymer Concrete Manholes in Sewer Systems (opens in a new tab)

  16. Testing and Evaluation of Confined Polymer Concrete Pile with Carbon Fiber Sleeve

    … this research is to investigate the behavior of polymer concrete confined with a carbon fiber sleeve used as a pile foundation. To evaluate the behavior of a confined polymer concrete pile in this research, four steps was considered. The first step of this investigation considered the mix design …

    arizona-thes Repository record for Testing and Evaluation of Confined Polymer Concrete Pile with Carbon Fiber Sleeve (opens in a new tab)

  17. Polymer Concrete Joints for Precast and 3D-Printed Bridge Systems in Accelerated Construction

    Polymer concrete (PC) is a non-cementitious composite material composed of polymer resin, hardener, and aggregates, in which the binding action takes place through polymerization of the resin rather than hydration of cement as in conventional concrete. Due to rapid polymerization, PC can develop …

    unr Repository record for Polymer Concrete Joints for Precast and 3D-Printed Bridge Systems in Accelerated Construction (opens in a new tab)

Page 1 of 3