Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Polymer Modified Binders"”.
-
Prediction of Linear Viscoelastic Response of the Loss Shear Modulus of Polymer-Modified Binders
… models, developed on straight asphalt binders, are inadequate to characterize the frequency dependence of response of polymer-modified asphalt binders. In an earlier study at Virginia Tech, mathematical models were developed to predict the storage and loss shear moduli of …
-
The performance of polymer modified bituminous mixtures.
The use of polymers in bituminous materials has been gaining popularity over the last decade. Despite their superiority in enhancing the performance of bituminous mixtures, problems have been experienced due to limitations on the applicability of currently available assessment techniques.This …
-
Effects of Storage on the Linear Viscoelastic Response of Polymer-Modified Asphalt at Intermediate to High Temperatures
… in the area of improved roadway performance is polymer-modified binder. The complex behavior of polymer-modified binders, particularly over time, is not yet well-understood by engineers. Therefore, an experimental study was performed to determine the effects of four years of storage at room …
-
Improvement of Asphalt Mixture Design for Cold Climatic Region
… low-density mixes and considered the impact of polymer-modified asphalt binders. In the first phase of the study, seven asphalt mixes were designed and tested, with three using the conventional Superpave (Superpave-4) mix design method, three utilizing the Superpave-5 mix design method for …
-
Performance of hot-mix asphalt mixtures for a balanced mix design
… Hamburg wheel-tracking test. Results showed that polymer-modified binders, recycled materials, and reduction of nominal maximum aggregate size contributed to better rutting performance. In addition, RAP fractionation technology showed a promising effort in making asphalt mixtures move towards a …
-
Implementação do ensaio stress sweep rutting e do shift model para a previsão da deformação permanente e misturas asfálticas brasileiras
… understand the effect of aggregates and asphalt binders on the permanent deformation of mixtures. The results showed that the use of polymer-modified binders can significantly improve the performance of mixtures in the field. It was not possible to identify the most relevant parameter for the …
-
Characterization of Polymer Modified Asphalt Binders Containing Processed Oil
… and processed oil were added to the binder. The modified binders were also aged artificially using different procedures. The study found that adding processed oil to polymer modified binders reduces viscosity and improves workability, while the modifiers improve the rutting resistance of them, …
-
A Statistical Dynamic Modulus Model of Hot Mix Asphalt Using Joint Estimation and Mixed-Effects Accounting for Effects of Confinement, Moisture and Additives
… not account for some HMA characteristics such as polymer modified binders, fibers, confinement and aging effects related to climatic conditions. Therefore, development of models more representative of local materials and conditions are desirable. In this study, a predictive model for dynamic …
-
INVESTIGATING THE IMPACT OF FREEZE-THAW CYCLES ON THE INTERNAL STRUCTURE OF ASPHALT CONCRETE USING IMAGING TECHNIQUES
… mixtures had various types of binder (virgin and modified), and different contents of reclaimed asphalt pavement (RAP). X-ray CT scanning was used to evaluate the microstructural changes of the AC samples based on changes in the structure of air voids and cracking in coarse aggregates. DCI was …
-
Microwave healing and deicing of asphalt pavements containing industrial slags: Towards intelligent and sustainable road winter maintenance
… healing and deicing processes. Furthermore, the binders are extracted to compare their properties and assess the damage caused by freeze-thaw (FT) cycles and MH. The findings reveal that appropriate heating time and power significantly enhance the effective healing area, achieving a healing …
-
Viscoelastic Modeling of Straight and Modified Binders at Intermediate and High Temperatures
… of a new range of high performance asphalt binders. These new binders known as modified asphalt binders, have a more complex behavior than traditional binders. A review of the current mathematical models shows that most of them suffer from different drawbacks that make them inadequate for …
-
Interaction between recycled tire rubber, polymers and high amount of reclaimed asphalt pavements
… benefit of using CR is being an alternative for polymer modification. Polymer modification of asphalt binders has gained quite a large popularity in many transportation agencies, primarily due to the superior crack and rut-resistant performance. However, added cost of polymer modification results …
-
Statewide Implementation of the Surface Performance Graded Specification for Chip Seal Binders in Texas
… (SPG) specification for chip seal binders was developed and validated using laboratory measurements and visual field performance of 120 highway sections (HSs). The SPG specification was established in an effort to extend the service life of chip seals by providing a binder grading …
-
Comprehensive study on the sustainable technology of asphalt rubber for hot mix asphalt binders and mixes
… and reusing ground tire rubber (GTR) in asphalt binders, this environmental issue is not only being addressed but also the overall performance of asphalt pavements is being improved. Although AR technology presents benefits to the fatigue performance of asphalt pavements as reported by the …
-
Development of high rut-resistant asphalt mixes for municipal pavements
… with controlled gradation, and incorporating polymer-modified binders. Moreover, adopting the Bailey Method for gradation checks and incorporating performance-based specifications, similar to practices in municipalities such as Edmonton and Toronto, would significantly enhance Winnipeg’s mix …
-
Towards advanced sustainable technologies for asphalt pavement materials
… engineered crumb rubber and post-consumer polymers into routine asphalt mixtures; and (4) developing an adapted, LCA-integrated Balanced Mix Design (BMD) framework that enables practitioners to meet both performance criteria and environmental thresholds simultaneously. Extensive analyses of …
-
Moisture Susceptibility of Asphalt Mixes Using Phosphonylated Recycled Polyethylene
… Research has indicated that the addition of polymers to asphalt binders can enhance many properties of the asphalt pavements to help meet these increased demands. There remains a serious problem that the addition of polymers to asphalt binders generally does not address. This involves the …
-
Characterization of Warm Mix Asphalt (WMA) performance in different asphalt applications
… <p>Finally, the rheological behavior of two binders: a base binder and a polymer modified binders incorporating two types of warm mix asphalt (WMA) additives were studied through an extensive testing scheme. The warm mix additives used were an organic wax and an oily chemical additive. Tests …
-
Evaluation of Balanced Asphalt Surface Mixtures with Conventional and High RAP Contents Using Laboratory and Accelerated Pavement Testing
… contents, recycling agents (RAs), fibers, and polymer-modified binders. Laboratory performance tests are essential to the BMD process, as they ensure the production of durable, high-performance materials. Beyond laboratory performance evaluation, accelerated pavement testing (APT) plays a …
-
Impact of Anti-Strip Additives on Performance of Asphalt Pavements
… of typical HMA pavements.Aggregates and binders were obtained from five different sources: Alabama, California, Illinois, South Carolina, and Texas to produce HMA mixtures that were evaluated in this study. Three mix designs were conducted for each material source: un-treated, …