Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"Polymer Slurry"”.
-
Time Dependent Effect of Drilling Slurries on Side Shear Resistance of Drilled Shafts
… FDOT preferred stabilization fluid, bentonite slurry, has been proven to degrade this interface with increased exposure time due to filter cake formation. For this reason, slurry exposure time has been limited to 36 hours by FDOT. Alternately, polymer slurries do not form a filter cake but …
-
The Evaluation of Hybrid Slurry Resulting from the Introduction of Additives to Mineral Slurries
… construction often requires the use of drill slurry to maintain borehole stability during excavation and concreting. While drill slurry may be composed of fluids ranging from air to petroleum, drilled shaft construction typically makes use of water based drilling fluids. Although clean water …
-
Electrochemical Methods to Characterize Drilled Shaft Deficiencies
… shown that the materials, more specifically the slurry, used to accomplish stabilization may be having a negative impact on the durability of the finished product. This thesis investigates the durability of drilled shaft specimens as it relates to the slurry type and viscosity. Electrochemical …
-
Construction Effects on the Side Shear of Drilled Shafts
… investigated 2 types of construction: (1) slurry stabilization in sandy soils using bentonite and polymer products that are commonly used on the field, with exposure times from near 0h to 96h, and (2) temporary casing stabilization in simulated limestone using 3 different methods for …
-
Determining the mechanisms behind the mesenchymal stem cell response to strontium apatite-wollastonite glass ceramic
… were heat treated into SrAWGC discs using a polymer slurry casting method, with high strontium compositions showing altered surface topographies. SrAW glasses released strontium linearly with increasing strontium content, whereas the SrAWGC discs released both increasing concentrations of …
-
Consumable Process Development for Chemical Mechanical Planarization of Bit Patterned Media for Magnetic Storage Fabrication
… machine process parameters, pad properties, and slurry characteristics are optimized. The research was conducted in a systematic manner in which the optimized parameters for each phase are utilized in future phases. The optimum results from each of the phases provide an overall optimum …
-
The Effects of Drilling Slurry on Reinforcement in Drilled Shaft Construction
… excavation or during concreting. Bentonite slurry is a popular choice among state DOT officials nationwide to maintain borehole stability as it has a long history with reasonable load carrying performance. However, specifications developed to replicate successful shaft construction are …
-
Effects of Slurry Type on Drilled Shaft Strength
… is affected by the use of various types of drill slurry. When concrete is placed in drilled shafts it flows out radially and a laitance interface forms creating a crease on the backside of the reinforcement cage due to the laitance trapped in concrete flowing around the rebar. This can cause …
-
A Theoretical and Practical Analysis of the Effect of Drilling Fluid on Rebar Bond Strength
… to attain this stability. Drilling fluid, or slurry, can be ground water or salt water, but is typically made from a mixture of water and mineral or polymer powder to form a viscous fluid slightly more dense than ground water. During concreting, the drilling fluid is displaced by the heavier …
-
Geotextile Design and Performance for Dewatering of Rare Earth Element Sludge Produced from Acid Mine Drainage
… containing sizes of 8.5x10-5mm and to analyze polymer dosage effects on dewatering and filtration. Small-scale performance testing was completed using double-lined geobags to analyze and predict large scale dewatering of the composite geotextile system. Consolidation testing was performed …