Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 134 for “"Polymer membrane"”.
-
INVESTIGATIONS OF POLYMER MEMBRANE ION-SELECTIVE ELECTRODES
The lifetime of the polymer membrane ion-selective electrode is, in general, short when compared to that of the glass pH electrode. It is the manner in which the elctroactive materials are entrapped in the ion-selective membranes which accounts for this lifetime difference. In the polymer membrane …
-
Catalyst Layer Design in Polymer Membrane Fuel Cells
One of the biggest obstacles to commercializing polymer electrolyte membrane fuel cells is the use of platinum as a catalyst. One way to overcome this obstacle is to replace platinum with non-platinum group metal (non-PGM) catalysts, particularly for the oxygen reduction reaction (ORR) in proton …
-
Transition metal ion co-ordination in hydrophilic polymer membrane
… metal (TM) ion complexation with hydrophilic membranes composed of copolymers of 4-vinyl pyridine & 4-methyl-4'vinyl- 2,2'-bipyridine with 2-hydroxyethyl methacrylate. The Cu(II), CoCII) & Fe(II) complexes with these coordinating membranes were characterised by a variety of techniques, in …
-
Natural gas conditioning with a heavy hydrocarbon permeable polymer membrane
… the maximum load output of the engine. Here membrane separation technology is being investigated to remove heavy hydrocarbons from the natural gas stream used to run these compressor engines. A rubbery polymer membrane is being used in a plate and frame type configuration which separates …
-
Developing Salicylate-Selective Polymer Membrane Electrodes Based on Lutetium (Iii) Porphyrins
… due to its superior selectivity by the Lu(III) membranes. Further, to demonstrate possible applications the Lu(III) metalloporphyrin-based ISEs were placed in a synthetic urine medium to analyze salicylate levels of clinical interest, where these ion-selective electrodes continued to exhibit …
-
Advanced polymer membrane development in pervaporation dehydration and lateral flow diagnostics
… this thesis concerns the advanced development of polymeric membranes of two types; pervaporation and lateral-flow. The former produced from a solution casting method and the latter from a phase separation. All membranes were produced from casting lacquers. Early research centred on the development …
-
Superhydrophobic Surface Modification of Carbon Nanotubes for Polymer Membrane in Direct Contact Membrane Distillation
Direct contact membrane distillation (DCMD) is a promising method for water purification and membrane is the key component governing the performance of the membrane distillation (MD) process which need the high porosity, thin thickness, narrow pore distribution and enough pore size. However, the …
-
Phase-Field Modeling of the Polymer Membrane Formation Process for Micro- and Ultra-Filtration
Porous polymer membrane filters are widely used in separation and filtration process. Micro- and ultra-filtration membranes are commonly used in biopharmaceutical applications such as filtering viruses and separating proteins from a carrier solution. The formation of these membrane filters via …
-
ION-SELECTIVE ELECTRODES FOR ORGANIC CATIONS AND PHARMACEUTICALS (ISE, POLYMER MEMBRANE CALCIUM CHANNEL BLOCKERS).
Three areas related to Polymer Membrane Ion-Selective Electrodes were investigated. The first two concered (1) their application to analysis of organic cations and pharmaceuticals, and (2) the use of electrochemically polymerized films for potentiometric sensors. The third area focused on the …
-
Development of a Predictive Model for Bulk-Flow Through A Porous Polymer Membrane Tube
… this work, the mainstream flow through a porous polymer membrane tube is examined and a method for calculating the through-membrane flow rate and axial pressure drop is presented. Two membrane tubes are tested experimentally, and a simple set of modeling equations that are physically intuitive …
-
Construction and Characterization of Erbium(III) Porphyrin-Based Polymer Membrane Electrodes for the Determination of Benzoate Anions
… for ISEs. A plasticized polyvinyl chloride (PVC) membrane doped with Erbium(III) porphyrin was mounted on electrode bodies and used to determine potentiometric responses to a broad range of anions over different concentration values. Preliminary results from the Erbium(III) porphyrin-based ISEs …
-
Effects of polymerization conditions and imidization methods on performance of crosslinkable polymer membrane for CO₂/CH₄ separation
… meet the United States pipeline specifications. Membrane separation technology can be advantageous over cryogenic distillation and amine adsorption in terms of cost and efficiency. The key hurdle to overcome in polymeric membrane separation technology is improvement in selectivity, productivity, …
-
Molecular Simulation Study on the Wetting Behavior of Zwitterion Grafted Polymer Membranes
… the wetting behavior of zwitterion-tethered polymer membranes using molecular simulations. We obtain interfacial properties (e.g., contact angle) of water at various temperatures for polysulfone (PSF) / polyethylene (PE) membranes grafted with different antifouling polymer tethers. Three …
-
Time-dependent Yielding and Residual Strain Accumulation of Polymer Membranes
Polymer membranes are used extensively in large lightweight structures applications such as superpressure balloons. Design of these structures for long-term operations requires accurate modeling and characterization of the permanent deformation appearing in the structures due to the time and …
-
TiO2-doped Ionic Polymer-Metal Composite Actuator
Ionic polymer metal composites (IPMCs) have received substantial attention in the past several years. IPMC actuators are capable of complex deformation in water and air and they are soft actuation materials with promising applications in wide range of fields, such as robotics and medical devices. …
Page 1 of 7