Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 8 of 8 for “"Polymer-modified mortar"”.

  1. Mechanical Properties of Polymer Modified Mortar

    The mechanical properties of the polymer-modified mortar are markedly improved over conventional cement mortar. We utilized recycled ABS in powder form and a polymer latex emulsion, polymer percentage ranges from 0 to 25 percent by polymer/cement ratio were investigated. The mechanical properties …

    unt Repository record for Mechanical Properties of Polymer Modified Mortar (opens in a new tab)

  2. Mitigating Water Permeation through Cracks in Superabsorbent Polymer-Modified Mortar

    Cracks in mortar and concrete create direct pathways for water and aggressive ions, accelerating durability-related deterioration. Superabsorbent polymers (SAPs) can reduce this moisture transport through cracks by absorbing incoming water, swelling within or near cracks, and partially blocking the …

    texas-state Repository record for Mitigating Water Permeation through Cracks in Superabsorbent Polymer-Modified Mortar (opens in a new tab)

  3. Αποκατάσταση και ενίσχυση διαβρωμένων στοιχείων από ωπλισμένο σκυρόδεμα με σύνθετα υλικά

    … of patch repair and Fiber Reinforced Polymers bonded laminates to retrofit reinforced concrete beams with corrosion damage are investigated in the present research. The uncovering of the damaged concrete cover provides a more accurate assessment of the corrosion degree, as the actual …

    greece Repository record for Αποκατάσταση και ενίσχυση διαβρωμένων στοιχείων από ωπλισμένο σκυρόδεμα με σύνθετα υλικά (opens in a new tab)

  4. Bio-Inspired and Low-Content Polymer Cement Mortar for Structural Rehabilitation

    Use of polymers as partial replacement for Portland cement in cement mortar and concrete can diminish several drawbacks of these composites such as low tensile strength and strain capacity, high permeability and low adhesion. Main reasons for the use of polymers are to improve damage tolerance, …

    south-carolina Repository record for Bio-Inspired and Low-Content Polymer Cement Mortar for Structural Rehabilitation (opens in a new tab)

  5. Vývoj cementových stěrek vyšších užitných vlastností

    Cílem této práce je shrnout a posoudit vlastnosti polymery modifikovaných cementových stěrek, jejich trvanlivost a možnost povrchových úprav. V poslední době se zvyšují požadavky na dodatečné úpravy povrchu pohledových betonů a aplikace cementových stěrek může zrychlit a zjednodušit realizaci …

    brno-tech Repository record for Vývoj cementových stěrek vyšších užitných vlastností (opens in a new tab)

  6. Latexem modifikované cementové kompozity

    … vlastností a tvorba prototypu samorozlivného, polymercementového kompozitu z oblasti ternárního pojivového systému PC-CAC-CS modifikovaného chemickými přísadami (aditivy) a polymerními látkami. Práce systematicky popisuje ve čtyřech krocích optimalizaci kompozitu s ohledem na jeho klíčové …

    brno-tech Repository record for Latexem modifikované cementové kompozity (opens in a new tab)

  7. Studium účinnosti polymerní přísady EVA v závislosti na ošetřovacích podmínkách malty

    Diplomová práce se zabývá problematikou polymerem modifikovaných malt (PMM) a jejich vlastnostmi v závislosti na ošetřovacích podmínkách. V teoretické části jsou popsány důvody a vybrané využití polymerních přísad k modifikaci cementového kompozitu a taktéž je rozebrán mechanismus vytvrzování …

    brno-tech Repository record for Studium účinnosti polymerní přísady EVA v závislosti na ošetřovacích podmínkách malty (opens in a new tab)

  8. Bond Strength of Adhered Manufactured Thin Stone/Brick Masonry Veneer Units to Setting Bed Mortar at Different Temperatures and Different Cycles of Freeze-Thaw

    … of adhered thin masonry units and mortars on the bond strength in adhered thin masonry veneer (ATMV) applications. There have been numerous cases of bond failures in ATMV applications probably due to lack of knowledge and the lack of any standards for the design and installation of …

    calgary Repository record for Bond Strength of Adhered Manufactured Thin Stone/Brick Masonry Veneer Units to Setting Bed Mortar at Different Temperatures and Different Cycles of Freeze-Thaw (opens in a new tab)