Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 51 for “"Polymers and Polymerization"”.

  1. Super-aptamer bio-imprinted hydrogels : an investigation into the optimization and characterization of cross-linked polymeric materials displaying macromolecular amplified responses

    … of analytes for biomedical, environmental, and national security applications. Equally important is that new methods should be easy to use, inexpensive, portable, and if possible allow detection using the naked eye. Detection of low concentrations of analytes generally cannot be achieved …

    lsu-thes Repository record for Super-aptamer bio-imprinted hydrogels : an investigation into the optimization and characterization of cross-linked polymeric materials displaying macromolecular amplified responses (opens in a new tab)

  2. Effect of mixing on polymerizations in batch reactors

    <p>The effects of mixing on polymerizations in batch reactors are examined theoretically for initiations by thermal decomposition of catalyst and by absorption of ionizing radiation. Mathematical expressions for predicting the first three moments of the dead polymer size distribution are presented. …

    njit Repository record for Effect of mixing on polymerizations in batch reactors (opens in a new tab)

  3. Viscoelastic properties of polymer melts

    <p>Thirteen samples of molten polymers were used to test Spriggs and Careau Models. Two empirical equations, one for apparent viscosity and the other which is new, for primary normal stress difference, were checked with these samples also.</p><p>In order to test the models, material functions were …

    njit Repository record for Viscoelastic properties of polymer melts (opens in a new tab)

  4. The plasticization of 4-methyl-pentene-1 (TPX-RT-D30) polymer with petroleum jelly

    … weight petroleum jelly (P.J.) at 270°C, pressed and quenched in water. Samples were die cut for the various tests. The polymer tensile properties (ASTM-638-64T) showed both a break and yield value in all ratios as compared to only a break value for the TPX-RT polymer. Breaking strength ranged …

    njit Repository record for The plasticization of 4-methyl-pentene-1 (TPX-RT-D30) polymer with petroleum jelly (opens in a new tab)

  5. Flow behavior of molten polymer blends

    … were two phase blends of non-crystalline polymers (poIymethylmethacrystate-low Mw-polyvinylacetate, polyvinylacetate-polystyrene, polymethylmethacrylate-low Mw-polystyrene, polymethylmethacrylate-high Mw-polystyrene), crystalline polymers (polyethylene-polypropylene) and combinations of …

    njit Repository record for Flow behavior of molten polymer blends (opens in a new tab)

  6. The kinetics and mechanism studies of cathodic electro-initiated crosslinking polymerization of unsaturated polyester prepolymer

    <p>The cathodic electro-initiated polymerization reaction of the unsaturated polyester prepolymer has been found to have the characteristics of the first order ionic initiation polymerization mechanism. The rate of polymer formation is directly proportional to the current intensity and voltage …

    njit Repository record for The kinetics and mechanism studies of cathodic electro-initiated crosslinking polymerization of unsaturated polyester prepolymer (opens in a new tab)

  7. Transient phenomena of polymer : Aniline-formaldehyde fiber and copolymer aniline-phenol-formaldehyde fiber

    … the viscosities of 6% L-200 in PRIMOL 355 and Lekutherm x-30. Viscosities of 6% L-200 in PRIMOL 355 (polyisobutylene) was measured to check the change of material that was left in the visometer for almost two years. The result showed that the new viscosities are higher than the older …

    njit Repository record for Transient phenomena of polymer : Aniline-formaldehyde fiber and copolymer aniline-phenol-formaldehyde fiber (opens in a new tab)

  8. Characterization of polymers and copolymers containing blocked isocyanate and hydroxyl functions

    <p>Some low molecular weight polymers and copolymers including four MMA homopolymers , six MMA-HEMA (hydroxyethyl methacrylate) copolymers and a 17.5 K standard polystyrene sample were characterized as to weight average molecular weight ( M<sub>w</sub> ) , and second virial coefficient ( …

    njit Repository record for Characterization of polymers and copolymers containing blocked isocyanate and hydroxyl functions (opens in a new tab)

  9. Viscosity determination during polymerization

    … for the purpose of designing, constructing, and operating a viscometer which could be employed for measuring viscosities in the range of 200 to 700 poises at temperatures up to 300°C. Such an instrument was built and used to study the viscosity of Type EV polymer during …

    njit Repository record for Viscosity determination during polymerization (opens in a new tab)

  10. Dielectric properties of atactic and isotactic polystyrene

    … was to determine the dielectric constant and dissipation factor of atactic and isotactic polystyrene at 25°C and at frequencies of 0.1, 1.0, 10, and 100 kilocycles per second. In addition, the effects of molecular weight and crystallinity on the dielectric properties of polystyrene mos …

    njit Repository record for Dielectric properties of atactic and isotactic polystyrene (opens in a new tab)

  11. Transient phenomena of polymer solutions

    … % NBS-2-35967 in a 35 - 65 mixture of aroclor and TCP, polyisobutylene (16.5% in mineral spirits), Indopol H-1900 (polyisobutylene) and 4.5% polyisobutylene in Primol 355. All these were done at a temperature of 77°F, except for Indopol H-1900 which was done at different temperatures. The …

    njit Repository record for Transient phenomena of polymer solutions (opens in a new tab)

  12. Flow of polymer melt blends through porous media

    … of molten polystyrene, poly(methyl methacrylate) and three blends of these polymers has been studied in a rheogoniometer and in packed beds of unconsolidated spherical glass beads. One primary purpose of the study was to determine the behavior of polymer melt blends in porous media flow. The …

    njit Repository record for Flow of polymer melt blends through porous media (opens in a new tab)

  13. Mathematical modeling of unsteady state photo-polymerization

    Mathematical modeling of unsteady state photopolymerization in an isothermal batch reactor has been investigated. An analytical solution of the distribution of active polymers as a function of reaction time has been determined. It is verified that the quasi-stationary state approximation is valid …

    njit Repository record for Mathematical modeling of unsteady state photo-polymerization (opens in a new tab)

  14. Measurement of thermal conductivity of polymers using line source method

    … the thermal conductivity of different molten polymers. Although the results obtained using this method are within acceptable experimental error limits, due to tec reasons explained, the results are not as accurate as claimed in the literature which describe this technique.</p>

    njit Repository record for Measurement of thermal conductivity of polymers using line source method (opens in a new tab)

  15. Continuous interfacial polycondensation of nylon 6-6

    … polycondensation from hexamethylene diamine and adipyl chloride in a stirred system. The effect of monomer concentration and stirring on the intrinsic viscosity of polyamide 6-6 solution in formic acid (90%) was determined.</p><p>As stirring rate and monomer ratio increased, the intrinsic …

    njit Repository record for Continuous interfacial polycondensation of nylon 6-6 (opens in a new tab)

  16. The effect of agitation on the polymerization of a vinyl chloride-ethyl acrylate latex

    … vinyl chloride-ethyl acrylate copolymer latex. Polymerizations were carried out in a 2 gallon stainless reactor with automatic control of jacket water temperature. Standard, "power calibrated" flat blade turbine impellers of 2 in., 3 in., and 4 in. diameter were used at speeds which provided an …

    njit Repository record for The effect of agitation on the polymerization of a vinyl chloride-ethyl acrylate latex (opens in a new tab)

Page 1 of 3