Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Polymers--Biodegradation"”.

  1. Studies of the aerobic biodegradation of polymers

    Thesis (M.S.)--Michigan State University. Department of Chemical Engineering, 1994

    msu Repository record for Studies of the aerobic biodegradation of polymers (opens in a new tab)

  2. Production and characterization of thermoplastic cassava starch, functionalized poly(lactic acid), and their reactive compatibilized blends

    … was selected and further blended with other polymers. TPCS sheets made from compression molding had low tensile strength (0.45 ± 0.05 MPa) and Young's modulus (1.24 ± 0.58 MPa), but moderate elongation at break (83.0 ± 0.18.6%), medium level of oxygen permeability, and high water vapor …

    msu Repository record for Production and characterization of thermoplastic cassava starch, functionalized poly(lactic acid), and their reactive compatibilized blends (opens in a new tab)

  3. Hydrolytic degradation of neat and modified poly(lactic acid) with nanoparticles and chain extenders by water-ethanol solutions

    Poly(lactic acid) (PLA), a biobased polymer, has been used for applications in the medical, agriculture and food packaging industries. During its life cycle, PLA can be exposed to different environments including water and alcohol solutions promoting its hydrolytic degradation. Depending on the …

    msu Repository record for Hydrolytic degradation of neat and modified poly(lactic acid) with nanoparticles and chain extenders by water-ethanol solutions (opens in a new tab)

  4. Biodegradable electroactive materials for tissue engineering applications

    This dissertation focuses on the development of biomaterials that could be used to enhance the regeneration of severed peripheral nerves. These materials were designed to be electroactive, biodegradable, and biocompatible. To render the materials electroactive the author chose to incorporate …

    texas Repository record for Biodegradable electroactive materials for tissue engineering applications (opens in a new tab)

  5. Biodegradation of polymers and isolation and crude characterization of proteins from these studies

    … of immobilized and free microorganisms in the biodegradation of polymers was investigated using a recirculation flow reactor and an air-sparged reactor respectively. The bio-oxidation ability of these microbes towards polyamide emulsion was studied. Extracellular protein cuts isolated were …

    njit Repository record for Biodegradation of polymers and isolation and crude characterization of proteins from these studies (opens in a new tab)

  6. The effect of chain extender on the molecular weight and hydrolytic degradation of poly(lactic acid)

    … used for studying the hydrolytic degradation of polymers over a broad range of temperature crossing Tg. A master curve was constructed using the time-temperature superposition principle. The experimental data at 85 °C were used to predict the degradation behavior at 40 °C. It was found that …

    msu Repository record for The effect of chain extender on the molecular weight and hydrolytic degradation of poly(lactic acid) (opens in a new tab)

  7. Production of the biodegradable plastic PHB (Poly-3-hydroxybutyrate) using recombinant Escherichia coli bacteria / by Richard Van Wegen.

    Substatial developmental work is required to acheive economically attractive poly-hydroxyalkanoate (PHA) production. Aims to improve the understanding of PHA production by recombinant Escherichia coli, with a view to guiding future developmental work. Also suggests numerous areas where further …

    adelaide Repository record for Production of the biodegradable plastic PHB (Poly-3-hydroxybutyrate) using recombinant Escherichia coli bacteria / by Richard Van Wegen. (opens in a new tab)

  8. Release kinetics of -tocopherol and resveratrol from poly(lactic acid) and poly(lactic acid)/starch blends

    The aim of this study was to investigate the use of poly(L-lactic acid) (PLLA) as active functional membranes for application in food and pharmaceutical packaging system. PLLA films containing various concentrations of α-tocopherol (α-TOC) and resveratrol were fabricated, and the influence of the …

    msu Repository record for Release kinetics of -tocopherol and resveratrol from poly(lactic acid) and poly(lactic acid)/starch blends (opens in a new tab)

  9. Antimicrobial and biodegradable food packaging films with chitosan-based N-halamine structures to prevent contamination by drug susceptible and resistant strains of Salmonella typhimurium

    Contamination of food samples with antibiotic resistant Salmonella Typhimurium has become a cause for concern due to difficulty in treating infections caused by this pathogen. In one approach, chitosan/PVA-based N-halamine (CPN) film was developed and tested for its efficacy in inactivating drug …

    msu

  10. Design and construction of a medium-scale automated direct measurement respirometric system to assess aerobic biodegradation of polymers

    … was designed and built to assess the aerobic biodegradation of up to 30 materials in triplicate simultaneously. Likewise, a computer application was developed for rapid analysis of the data generated. The developed DMR system was able to simulate different testing conditions by varying …

    msu Repository record for Design and construction of a medium-scale automated direct measurement respirometric system to assess aerobic biodegradation of polymers (opens in a new tab)

  11. Mechanical properties of bio-absorbable materials

    … have also been investigated, with compliant polymers (1%, 50% and 100% of matrix properties) and with hydroxyapatite (HA). Unidirectional, continuous fiber plies, and multi-directional, random and quasi-random short-fiber composites were considered in our study. NDSANDS a concentric cylinder …

    vt Repository record for Mechanical properties of bio-absorbable materials (opens in a new tab)

  12. High throughput characterization of cell response to polymer blend phase separation

    … libraries of the blend of the biodegradable polymers Poly(e-caprolactone) and Poly(lactic acid). These libraries present continuous composition and temperature gradients in an orthogonal fashion that permit to obtain multiple surface morphologies with controllable microstructures due to the …

    gatech Repository record for High throughput characterization of cell response to polymer blend phase separation (opens in a new tab)

  13. The use of conductive polymers to produce environmentally friendly multispectral screening materials

    Fibrous material is being developed that has a conductive polymer coating to achieve effective millimeter wave (MMW) screening performance in an aerosol cloud, and then degrade to a conductively inactive form after settling out. Designing degradability into the material addresses the problem of …

    ucf Repository record for The use of conductive polymers to produce environmentally friendly multispectral screening materials (opens in a new tab)

Page 1 of 2