Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Polymers--Testing"”.

  1. Structure-property relationships of electron beam cured systems containing bis-GMA

    Structure-property relationships were investigated for the bis-glycidyl methacrylate deriva-tives of bisphenol-A crosslinked by electron beam irradiation. This material, commonly called bis-GMA, is a viscous liquid at room temperature which crosslinks to form a glassy network when a 3 to 5 mil …

    vt Repository record for Structure-property relationships of electron beam cured systems containing bis-GMA (opens in a new tab)

  2. A study of processing methods for producing biaxial orientation in thermotropic liquid crystalline polymers

    Four methods of biaxial deformation were considered in an attempt to obtain biaxial orientation and properties in two thermotropic copolyesters: hydroxybenzoic acid-co-polyethylene terephthalate (HBA/PET) and hydroxybenzoic acid/2, 6 hydroxynaphthoic acid (HBA/HNA). They consisted of solid phase …

    vt Repository record for A study of processing methods for producing biaxial orientation in thermotropic liquid crystalline polymers (opens in a new tab)

  3. An investigation of polymer wear due to fatigue using a constant strain wear test

    A constant-strain wear test apparatus was built and used to test polyethyleneterephthalate. The results of the constant-strain wear tests were compared to results from a constant-strain fatigue test. The results of the wear test showed that the polymer did not fatigue below the surface where the …

    vt Repository record for An investigation of polymer wear due to fatigue using a constant strain wear test (opens in a new tab)

  4. Crystallization kinetics of polylactide and its blends

    … polylactides of desired molecular weights. The polymers PLA-L and PLA-DL produced were then utilized to make blends of semicrystalline/amorphous components. The compatibility of the blends was investigated by determining their Tg with a DSC. However, because of the proximity of the Tg's of the …

    vt Repository record for Crystallization kinetics of polylactide and its blends (opens in a new tab)

  5. Crystallization behavior of poly (p-phenylene sulfide): kinetics and morphology

    … lower than those of the higher molecular weight polymers. Introduction of 0.2% by weight of branching agent trichlorobenzene in the synthesis vessel reduced the spherulitic growth rate to 1/2, and the rate of bulk crystallization and the nucleation density to 1/4 of those of the linear polymer of …

    vt Repository record for Crystallization behavior of poly (p-phenylene sulfide): kinetics and morphology (opens in a new tab)

  6. The sliding wear of polymers against steel

    A laboratory wear testing facility has been developed to generate wear rate data for polymeric materials sliding at constant velocity against a hardened stainless steel base. The polymers investigated were ultra high molecular weight polyethylene (UHMWPE), ultra high molecular weight …

    cape-town Repository record for The sliding wear of polymers against steel (opens in a new tab)

  7. Improving the throughput of plasticating extruders : measurement of the interparticulate friction coefficient for polymeric particulates with circular and profiled cross sections

    <p>This thesis deals with the coefficient of friction between individual polymeric pellets, the interparticulate friction coefficient (IPFC). It has been measured using a shear cell for a wide variety of circular and profiled cross?section pellets for a variery of polymeric materials. First, the …

    njit Repository record for Improving the throughput of plasticating extruders : measurement of the interparticulate friction coefficient for polymeric particulates with circular and profiled cross sections (opens in a new tab)

  8. A Model for Abrasive Polymer Wear

    … a factor of 3 of the measured wear rates for polymers with glass transition temperatures, Tg, above the interfacial temperature (rigid PVC and PCTFE). The validity of the model is shown to be related to the ductile or brittle behavior of the sliding polymer.

    vt Repository record for A Model for Abrasive Polymer Wear (opens in a new tab)

  9. The use of thin polymeric coatings to prevent fretting corrosion and metallic contact in steel-on-steel systems

    … polysulfone (PSO) and polystyrene (PS). These polymers were applied as thin films to a steel disk which was in turn fretted by a normally-loaded steel sphere. The experimental investigation consisted of two phases. In the first phase, the lives of the ten polymer types were evaluated over a …

    vt Repository record for The use of thin polymeric coatings to prevent fretting corrosion and metallic contact in steel-on-steel systems (opens in a new tab)

  10. Definition of Brittleness: Connections Between Mechanical and Tribological Properties of Polymers.

    … of their behavior. Using data from micro-scratch testing, it was determined that viscoelastic recovery (healing) in sliding wear is independent of the indenter force within a defined range of load values. Strain hardening in sliding wear was observed for all materials-including polymers and …

    unt Repository record for Definition of Brittleness: Connections Between Mechanical and Tribological Properties of Polymers. (opens in a new tab)

  11. Determination of Wear in Polymers Using Multiple Scratch Test.

    … have typically lacked systematic approach to all polymers and wear test developed are specific to some polymer classes. In this thesis, different classes of polymers are selected and an attempt is made to use multiple scratch test to define wear and to create a universal test procedure that can be …

    unt Repository record for Determination of Wear in Polymers Using Multiple Scratch Test. (opens in a new tab)

  12. Swelling ratio determination of PDMS polymers: classic method versus a swelling ratio instrument

    … between the swelling ratio of cross-linked polymers and their molecular weight between cross-links is a fundamental aspect of polymer characterization. This connection is crucial for the characterization of polymer networks and the prediction of their properties. This study collected …

    umkc Repository record for Swelling ratio determination of PDMS polymers: classic method versus a swelling ratio instrument (opens in a new tab)

Page 1 of 2