Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Polyol Process"”.
-
Formation Mechanisms of Intermetallic Particles in a Microwave-Assisted Polyol Process
… and drawbacks. A facile procedure is the polyol process, which was first introduced by the group of FIÉVET and FIGLARZ in 1989. Here, the polyol serves a threefold purpose. First, it serves as the primary solvent. With respect to metal salts, it displays a solvation behavior similar to …
-
Non-Conventional Approaches to Syntheses of Ferromagnetic Nanomaterials
… high-throughput experimentation (HTE) (polyol process) and continuous flow (CF) synthesis (aqueous reduction and the polyol process). HTE was performed to investigate phase control between FexCo1-x and Co3-xFexOy. Exploration of synthesis limitations based on magnetic properties was …
-
Μελέτη σύνθεσης και επιφανειακής τροποποίησης μαγνητικών νανοσωματιδίων για βιοϊατρικές εφαρμογές
… as thermolysis, coprecipitation and modified polyol process and their characterization was processed with a plethora of techniques such as XRD, TEM, SEM, Μössbauer spectroscopy, FT-IR, TGA, VSM and SQUID. Specifically, organophilic γ-Fe2O3 and Fe3O4 nanopartcicles with controllable size (2-20 …
-
Synthesis and Characterization of Silver Nanowire Suspensions for Printable Conductive Media
… on solar panels. AgNWs were synthesized by a polyol process in both batch and continuous reactors, and a reaction mechanism was described. The morphology, diameter, and length of silver nanostructures were characterized by Scanning Electron Microscopy (SEM). The polyol synthesis was optimized …
-
SYNTHESIS OF GRAPHITIC CARBON NANOSTRUCTURES AND USE AS ELECTROCATALYST FOR OXYGEN REDUCTION REACTION
… platinum nanoparticles (size) by modified polyol process. Rotating ring disk electrode (RRDE) and fuel cell studies were carried out to evaluate the catalyst performance. Cycling studies (0.6-1.0 V vs. RHE) performed on RRDE indicated better catalyst stability when compared to commercial …
-
Enhancing the performance of transparent electrodes through the design of new silver nanostructures
… rather than the typical ethylene glycol in the polyol synthesis process, as well as the molecular weight of PVP, the temperature of the process, or the concentration of silver nitrate, we obtained silver nanowires with an aspect ratio between their lengths and diameters of 1050. Among all the …
-
Σύνθεση μέσω πολυολών διμεταλλικών νανοσωματιδίων, CuFe, CuZn και φερριτών ψευδαργύρου, ZnXFe3-XO4, και βιοεφαρμογές τους
In the current thesis, synthesis (under polyol process), characterization and bioapplications of hydrophilic coated CuFe bimetallic nanoparticles, CuFeO2 heterostructured nanoparticles, CuZn bimetallic nanoparticles and ZnxFe3-xO4 zinc ferrite nanoparticles are presented. Synthesis of the …
-
Study of the morphology control and solid solution behaviour of Olivine LiMPO4 (M = Fe, Mn, and Co)
… study, we have used hydrothermal synthesis and polyol process to control the size of LiMPO4 (M: Fe, Mn, and Co) particles. We will present how we prepare particles with different sizes. Moreover, the solid solution properties of various sizes of LiMPO4 (M: Mn and Fe) were studied. The result …
-
Novel Plasmonic Nanostructures for Applications in Sensing, Imaging, and Controlled Release
… using two methods. The first method was based on polyol process and the second was based on wet etching. The key for the dimerization process is to control the colloidal stability by adding appropriate amount of ionic species. I then investigated the SERS properties of the dimers of Ag nanospheres …
-
Synthesis and characterization of nanocrystalline binary and ternary intermetallic compounds
… metals and simple binary phases, but very few processes are capable of reliably producing intermetallic nanoparticles. In this dissertation, I describe several new approaches for synthesizing intermetallic nanocrystals. The first approach involves reducing metal salts in aqueous solution using …
-
Synthesis and characterization of patterned surfaces and catalytically relevant binary nanocrystalline intermetallic compounds
… compounds. This dissertation describes the processes we have developed, as well as our investigations into the use of lithographically patterned surfaces for template-directed self-assembly of solution dispersible colloids. We used a modified polyol process to synthesize nanocrystalline …
-
Μελέτη των μαγνητικών ιδιοτήτων και αλληλεπιδράσεων ανταλλαγής σε νανοσύνθετα μαγνητικά υλικά
… achive the required anisotropy a heat-treatment process is needed. However it is known that when nanoparticles are heat treated, agglomeration and sintering effects take place. In order to tackle this problem, novel magnetic nanocomposites and hybrids were prepared and studied. More specifically …
-
ALUMINA SUPPORTED MANGANESE-BASED CATALYSTS FOR CATALYTIC OZONATION OF ACETONE AND TOLUENE IN AIR
… pollution. Catalytic ozonation is an efficient process for VOCs removal from indoor air at room temperature. In this Ph.D. thesis, alumina supported Mn oxides which are considered as one of the most active catalysts for ozonation of VOCs are used to oxidize acetone and toluene in air at room …
-
Application of Luminescence Sensors in Oxygen Diffusion Measurement and Study of Luminescence Enhancement/Quenching by Metallic Nanoparticles
… of Ag-Cu nanoparticles synthesized by the polyol process on the luminescence of low quantum yield dye Cy3. In the third part of this thesis, quenching effect of Cu nanoparticles on CdSe/ZnS nanocrystal quantum dots has been explored. As Cu nanoparticles have comparable dielectric properties …
-
Estudo da influência da dopagem e do acoplamento de fases magnéticas sobre o (BH)max da BaFe12O19
… 0.50, 0.75 and 1.0). In the second, through the polyol process, we coated samples of pure and impurity-free barium hexaferrite (also obtained by the ICR method) with superparamagnetic nanoparticles of cobalt ferrite (CoFe2O4), obtaining coupled nanocomposites of BaFe12O19/CoFe2O4 with different …
-
Capture of Gaseous Sulfur Dioxide Using Graphene Oxide Based Composites
… investigated to capture SO₂, such as adsorption processes using zeolites and metal oxides (e.g., Iron (Fe) and Vanadium (V) based) which tend to sustain wide ranges of temperatures and pressures. Graphene oxide (GO) was also shown to physisorb SO₂ at low temperatures. In this work, we propose to …
-
Silver nanoparticles and thin films for strained-silicon surface enhanced raman spectroscopy and capacitively-coupled radiofrequency heating
… synthesised via a chemical reduction technique (polyol process) using poly(vinylpyrrolidone) as the capping agent, as well as citrate stabalised NPs, were also dispersed onto identical samples. Both techniques were analysed for their SERS viability via micro-Raman spectroscopy (488 nm Ar+ …
-
Development Of Highly Active And Stable Compressive Pt Cathode Catalysts For Polymer Electrolyte Membrane Fuel Cells
… on the ACCS was optimized using a modified polyol process developed in our laboratory in order to control Pt particle size and Pt particle distribution. Fuel cell performance and stability of Pt/ACCS were evaluated using accelerated stress test (AST) protocols recommended by the US Fuel Cell …
-
Printable gas sensors based on transition metal vanadate nanostructures
… were synthesized by two synthetic procedures, a polyol process at room-temperature and a solvothermal process at 150oC. The transition metal vanadates synthesized had the formula of MxV2O5+x, M= Co (cobalt), Ni (nickel), Co-Ni (cobalt-nickel) and Zn (zinc) and x=1-3. The synthetic parameters …
-
Novel synthetic approaches and doping strategies for facile and versatile synthesis of tetrahedrite thermoelectrics
… materials. First, the solution-phase modified polyol process has shown success in producing nanostructured tetrahedrites with exceptionally good ZT values. Next, the mechanical alloying procedure is capable of consistently yielding high-purity tetrahedrite in about 48 hours of total reaction …
Page 1 of 2