Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"Polyoxymethylene"”.

  1. A Study of the Degradation of Polyoxymethylene

    … degradation of linear high molecular weight polyoxymethylene with hydroxyl and acetate chain-ends.

    glasgow Download PDF for A Study of the Degradation of Polyoxymethylene (opens in a new tab)

  2. The effect of branch density polyoxymethylene copolymers

    … the overabundance of plastic waste in landfills. Polyoxymethylene can be produced from biorenewable feedstocks, depolymerized to formaldehyde through chemical recycling, and may be a viable alternative to many polyolefins. However, there has been limited research on varying the thermomechanical …

    tamu Repository record for The effect of branch density polyoxymethylene copolymers (opens in a new tab)

  3. Histologic Host Response to Polyoxymethylene Prosthesis as a Temporomandibular Joint Condylar Replacement

    Polyoxyinethylene (Delrin) is a polyacetyl homopolymer which has been used successfully in many orthopedic joint replacements. To determine histologic host response to Delrin as a temporomandibular joint condylar replacement condyles were removed from ten fully mature macaca fasicularis monkeys. …

    loma-linda Repository record for Histologic Host Response to Polyoxymethylene Prosthesis as a Temporomandibular Joint Condylar Replacement (opens in a new tab)

  4. EVALUATION OF POLYOXYMETHYLENE DIMETHYL ETHERS FOR COMPRESSION IGNITION ENGINES THROUGH EXPERIMENTS AND MECHANISM STUDY

    This thesis presents a thorough assessment of Polyoxymethylene Dimethyl Ethers (PODEn) as fuel additives in compression ignition (CI) engines, focusing on PODE3 and PODE4. The study evaluates engine performance and gauges gas emissions, with a special emphasis on particulate matter (PM) emissions. …

    nus Repository record for EVALUATION OF POLYOXYMETHYLENE DIMETHYL ETHERS FOR COMPRESSION IGNITION ENGINES THROUGH EXPERIMENTS AND MECHANISM STUDY (opens in a new tab) Download file for EVALUATION OF POLYOXYMETHYLENE DIMETHYL ETHERS FOR COMPRESSION IGNITION ENGINES THROUGH EXPERIMENTS AND MECHANISM STUDY (opens in a new tab)

  5. COMBUSTION AND EMISSIONS FORMATION IN DIESEL ENGINE FUELED BY POLYOXYMETHYLENE DIMETHYL ETHER AND ITS BLENDS

    … soot particles. Amongst the various oxygenates, polyoxymethylene dimethyl ether, or PODEn, has the highest potential largely due to its high oxygen content and cetane number. A highly compact and reliable PODE3 mechanism consisting of 61 species and 190 reactions has been developed based on …

    nus Repository record for COMBUSTION AND EMISSIONS FORMATION IN DIESEL ENGINE FUELED BY POLYOXYMETHYLENE DIMETHYL ETHER AND ITS BLENDS (opens in a new tab) Download file for COMBUSTION AND EMISSIONS FORMATION IN DIESEL ENGINE FUELED BY POLYOXYMETHYLENE DIMETHYL ETHER AND ITS BLENDS (opens in a new tab)

  6. Emissions Optimization of Propane Dual Fuel Combustion Ignited by Diesel and Polyoxymethylene Dimethyl Ether At Low Loads

    Dual fuel engines utilize two different fuels consisting of a high reactivity fuel (HRF)injected into the cylinder and a low reactivity fuel (LRF), typically fumigated into the intakemanifold. In order to reduce the emissions of nitrogen oxides when compared against dieselcombustion, dual fuel …

    alabama Repository record for Emissions Optimization of Propane Dual Fuel Combustion Ignited by Diesel and Polyoxymethylene Dimethyl Ether At Low Loads (opens in a new tab)

  7. An experimental study of the structure and properties of melt spun polyotymethylene filaments

    … with spinning conditions during melt spinning of polyoxymethylene. Filaments were spun over a range of take-up velocities for each of two mass flow rates (0.58 g/min and 2.ll g/min) at an extrusion temperature of 196°c. Spinline stress and temperature were measured on a running spinline. …

    ut-knoxville Repository record for An experimental study of the structure and properties of melt spun polyotymethylene filaments (opens in a new tab)

  8. Development of Functional Polymer-Graphene Nanocomposites

    … Polypropylene, poly(methyl methacrylate) and polyoxymethylene were used as polymer matrices with polypyrrole and polyaniline as secondary conducting polymers. Graphene (G) and rGO were used as reinforcements. The maximum electrical conductivity of 0.85 S.cm-1 was achieved for a …

    auckland-ms Repository record for Development of Functional Polymer-Graphene Nanocomposites (opens in a new tab)

  9. Utveckling av Trailplate - En skyddande innersula

    … plastic. The final recommendation for Icebug was Polyoxymethylene (POM) because it had the desired qualities with the added bonus of being cost effective. The final design included a flexible forefoot that follows the foots flex line (the metatarsal-phalangeal joint), ridges in the forefoot to …

    chalmers Repository record for Utveckling av Trailplate - En skyddande innersula (opens in a new tab)

  10. The electron microscopy of crystalline polymers

    … properties. Preparations of polyethylene (PE), polyoxymethylene (POM), poly-4-methylpentene-1 (P4MP), nylon 6 and polyethylene oxide were characterized in the transmission electron microscope, confirming previous work for the most part. The scanning electron microscope, operating in its normal …

    oxford Repository record for The electron microscopy of crystalline polymers (opens in a new tab)

  11. Oligomer-polymer gel spinning of high performance fibers

    … process is used for producing high strength polyoxymethylene (POM) fibers for their potentially excellent engineering properties. With the ‘oligomer-polymer’ spinning system, a new ‘solvent’ has been found for POM and results showed that high strength POM fiber can be successfully gel spun. …

    gatech Repository record for Oligomer-polymer gel spinning of high performance fibers (opens in a new tab)

  12. Large Eddy Simulation of Solid-Fuel Ramjet Combustion

    … applied to another combustor using a model fuel, polyoxymethylene (POM), to assess its combustion characteristics.

    gatech Repository record for Large Eddy Simulation of Solid-Fuel Ramjet Combustion (opens in a new tab)

  13. The sliding wear of polymers against steel

    … a friction reducing additive (UHMWPE/FILL), polyoxymethylene (POM), poly(ethylene terephthalate) (PETP), molybdenum disulphide filled polyamide 6 (PA6/MoS₂) and graphite filled poly(amide-imide) (P(A-I)/GR). Testing was carried out as a function of sliding velocity between 0.13 to 2.27 ms⁻¹, …

    cape-town Repository record for The sliding wear of polymers against steel (opens in a new tab)

  14. Novel Design of a Portosystemic Shunt Occluder

    … shunt occluder device consist of three polyoxymethylene components, a swelling hydrogel (poly (acrylic acid)), and a degrading copolymer – (Poly (lactide-co-caprolactone)). The poly (acrylic acid) was used to move the piston component of the device upward to constrict the portosystemic …

    ut-knoxville Repository record for Novel Design of a Portosystemic Shunt Occluder (opens in a new tab)

  15. Biochar for assisted phytomanagement of contaminated soils : short term effects on contaminant availability and plant growth

    … selected inorganic contaminant analysis while polyoxymethylene (POM) samplers were used in laboratory equilibrium tests to determine freely dissolved concentrations of organic contaminants in soil.Biochars consistently reduced plant uptake (in plant species maize and Italian ryegrass) for both …

    strathclyde Repository record for Biochar for assisted phytomanagement of contaminated soils : short term effects on contaminant availability and plant growth (opens in a new tab)

Page 1 of 2