Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 90 for “"Polypropylene fibers"”.
-
Polypropylene fibers
… saturated textile and chemical markets is polypropylene fiber. The objectives of this Thesis were to: (1) examine the effects of polymer characteristics and fiber processing conditions on the properties of polypropylene fibers, and (2) correlate all existing information on the physical, …
-
Phase separation spinning of polypropylene fibers
Polypropylene fibers were spun from solutions of different polymer contents undergoing phase separation. The range of concentrations used was 25 to 60 wt. % polypropylene. The solvent used was naphthalene. After the naphthalene was extracted from the fibers using diethyl ether the fiber's …
-
Physical Properties of Concrete Reinforced with Polypropylene Fibers
… physical properties of concrete reinforced with polypropylene fibers are examined in this experimental investigation. Specifically, the properties of workability, compressive strength, tensile strength, and flexural strength (modulus of rupture) are investigated. Two separate concrete mixes are …
-
Cracking in Concrete Overlays Reinforced with Polypropylene Fibers
… conventional reinforcement in concrete with fibers. Most fiber reinforced concrete overlays have used steel fibers as reinforcement. The problem with steel fibers is that the steel fibers can corrode resulting in the same type of failure as that of the original base pavement. In this study …
-
Properties and characteristics of polypropylene fibers spun by the phase-separation technique
… technique as applied to the production of polypropylene fibers from naphthalene solutions. The solutions were spun through a single 2.00 millimeter spinneret at compositions of 15 and 22 per cent polymer and at temperatures of 145 and 160°C. Linear velocities in the spinneret and draw …
-
Increasing residual structural capacity of cracked concrete railroad crossties with polypropylene fibers
The purpose of this research was to employ polypropylene fibers into concrete railroad crossties to increase its residual structural capacity once the concrete has cracked. The center negative flexural cracking is considered as a serious failure mode in concrete railroad crossties, which decreases …
-
Study of structure development during Melt Spinning of isotactic Polypropylene fibers using Raman Spectroscopy and Wide Angle X-ray Diffraction Simultaneously
ABSTRACT Isotactic polypropylene (iPP) fibers have a wide variety of applications. Specific end-use applications require specific properties, which are dependent on the polymer morphology produced during processing. Therefore, the final properties of a material are dependent on the processing …
-
Formulação e caracterização de compósitos cimentícios leves aplicados a silos prefabricados
… concrete formulations reinforced with steel and polypropylene fibers could be applied in the manufacture of silos for grain storage. Traces were formulated containing polypropylene fibers and the polymer fibers containing traces together with steel fiber. For all compositions the same …
-
How Air Voids Affect the Performance of Concrete Subjected to Fire
… extensively studied recent years. Inclusion of polypropylene fibers in concrete mix are commonly treated as a feasible method against spalling as they can increase the permeability of concrete in high temperature environments to release the interior pressure. Recently, air entrained concrete is …
-
Rheological, Mechanical, and Microscopic Properties of Polypropylene Fiber Reinforced-Geopolymer Concrete for Additive Manufacturing
… investigates the development and enhancement of polypropylene fiber-reinforced geopolymer concrete (GPC) for 3D printing applications. The first part of the study investigates the impact of integrating various contents polypropylene fibers (0.8%, 1.0%, and 1.2%) by volume into GPC, utilizing …
-
Residual Strength of Ultra-High Performance Concrete After Exposure to Elevated Temperatures
… by the manufacturer incorporates only steel-fibers to improve the tensile properties of the concrete. The enhanced mixture, which is of primary focus in the study, incorporates additional polypropylene fibers to improve the fire-resistance behavior. Specimens from each mixture were cast into …
-
An analysis of the interfacial bond between polypropylene reinforcing fiber and cement matrices
… a method to improve the interfacial bond between polypropylene fiber and Type l Portland cement and also to investigate the improved qualities of the interfacial bond. The process chosen to improve the interfacial bond between polypropylene fiber and the cement matrix was a chemical surface …
-
Estudo do potencial de aditivo cristalizante como estimulador de autocicatrização de fissuras de matrizes cimentícias
… regain and durability enhance. The addition of polypropylene fibers (PP) in the pastes enabled the induction of a single controlled crack width by the splitting tensile test. The macrostructural results were related to microstructural analysis. Hydrates localized in the microstructure cement …
-
Flexure shear response in fatigue of fiber reinforced concrete beams with FRP tensile reinforcement
… response of concrete with differing fractions of polypropylene fibers by volume, individual compressive tests were performed on both lab-mix and ready mix concrete specimens. In the lab, concrete mixes with 0.0%, 0.5%, and 1.0% by volume, fibrillated polypropylene fibers were produced. Along with …
-
Investigación de la mejora de las propiedades mecánicas y térmicas de matrices de polipropileno con nanoarcillas para la fabricación de fibras
… of multifunctional and high performance fibers may experience a starting point for defining differentiators that provide added value to the sector, allowing a favorable access to international markets. The use of nanoparticles in the field of plastics and composite materials has boomed at …
-
Oil sorption behavior of fibrous substrates
… are a hazard to the environment. Synthetic fibers like polypropylene occupy a major share of the oil spill cleanup industry. Being non-biodegradable, the oil soaked synthetic sorbents pose a risk to the environment when they are disposed. Furthermore, if the oil soaked polypropylene sorbents …
Page 1 of 5