Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 2791 for “"Polystyrene"”.
-
Dendronized Polystyrene
It was discovered that the mixed attach-to route is successful in obtaining higher generation (above 3) dendronized polymers. Consequently, this strategy enables to prepare of higher generation dendronized polymers with high molar mass (above Pn = 400). These polymers have not been accessible by …
-
Thermal and rheological characterization of polystyrene and polystyrene grafted silica nanocomposites
… thermal and rheological study of two matrix-free polystyrene-grafted silica nanocomposites. Polystyrene chains of 35 and 112 kg/mol are grafted onto silica nanoparticles and properties are compared with analogous neat polymers, both in enthalpic and in volumetric space, using differential scanning …
-
Fluorinated Polystyrene-b-polybutadiene-b-polystyrene (SBS) for Membrane Gas Separation
… and thermal stability. In this study, polystyrene-b-polybutadiene-b-polystyrene (SBS) was modified via gem-difluorocyclopropanation of double bonds in the PB phase and investigated for CO2/N2 and CO2/CH4 separation. 1HNMR confirmed the degree of the fluorination, and physical properties …
-
Orientation aging in polystyrene
… aging) of this oriented state.</p> <p>Oriented polystyrene was prepared by pulling fiber-like samples in the rubbery state and quenching them to the glassy state. The study was carried out by monitoring the decay of birefringence and the shrinkage of length as a function of time and temperature, …
-
Photochemical degradation of polystyrene
In this work the oxidative degradation of pure polystyrene, polybutadiene and butadiene-modified polystyrene (normally called high impact polystyrene or HIPS) have been studied using a variety of physical and chemical techniques. The changes in dynamic-mechanical properties occurring during the …
-
Melt Fracture of Polystyrene
… has been used to study the melt fracture of polystyrene. The polystyrene samples used differed in molecular weight and molecular weight distribution. The weight average molecular weight (Mw) ranged from 97,200 to 1.8 x 10^6 and the distribution breadth (Mw/Mn) from 1.06 to 9.21. Results …
-
Thermal Degradation of Polystyrene
… and compared with the constants, obtained from a polystyrene having much larger molecular weights.</p>
-
Variable angle internal reflection Raman spectroscopy of polystyrene/deuterated polystyrene thin film interfaces
Includes bibliographical references (pages 60-63).
-
Rheology of asbestos filled polystyrene
… volumetric flow rate at various pressures for a polystyrene resin and for an asbestos filled polystyrene. Variables evaluated were per cent asbestos and temperature. These data were then used to calculate the maximum shear stress at the capillary wall and the corresponding maximum velocity …
-
The Photo-Oxidation of Polystyrene
Abstract Not Provided.
-
The "weak links" in polystyrene
Abstract not provided.
-
The Thermal Depolymerisation of Polystyrene
Abstract Not Provided.
-
Acoustic birefrengence of liquid polystyrene
Thesis (M.S.)--Michigan State College of Agriculture and Applied Science. Dept. of Physics, 1954
-
Morphology and structure of syndiotactic polystyrene.
The delta-phase of the syndiotactic polystyrene/ethylbenzene system, as formed by crystallisation from dilute solution, is shown to result in a lamellar morphology, with a monoclinic crystal lattice similar to that already reported for the complex with toluene. The temperature/concentration phase …
-
3D-PRINTED POLYSTYRENE FOR CELL CULTURE
… these and other clinical goals have relied on 2D polystyrene (PS) as the fundamental substrate for cell culture. With the emergence of 3D printing, improved biomimicry with 3D culture models are becoming widely available. In this dissertation, we develop a 3D PS culture substrate for adherent and …
-
Ethylcellulose lacquer coatings for polystyrene plastics.
… and protective purposes was developed for use on polystyrene plastics. It was found that a one-coat lacquer containing only alcohol solvents produced the most satisfactory finish. Formulations were based on experimental work, conducted to determine the effect of the various lacquer components on …
Page 1 of 140