Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 240 for “"Pore pressures"”.
-
Pore Pressures in Partially Saturated Soils
Made available in DSpace on 2014-12-10T22:21:28Z (GMT). No. of bitstreams: 1 7114755.pdf: 4144484 bytes, checksum: 8c428c8b9808536d048776d1c080ae0b (MD5) Previous issue date: 1970
-
The influence of loading rate on excess pore pressures in triaxial tests
… errors due to incomplete drainage or non-uniform pore pressures in fine grained soils. The work consisted of a combination of laboratory tests in which pore pressures were measured within triaxial samples, numerical analysis using the CRISP geotechnical finite element program and theoretical …
-
Investigation of Pore Pressures During High-Velocity Impact by a Free Fall Penetrometer
… capabilities, modern FFPs can be equipped with pore pressure sensors. Pore pressure measurements are extensively used in traditional cone penetration testing, but their usage and interpretation is still limited for FFP testing. This thesis represents an effort to advance the interpretation of …
-
Role of transient pore pressures and effective stresses in progressive open pit slope failure
… dissertation investigates the role of transient pore pressures in the progressive failure of large open pit mine slopes. Conventional slope stability analyses often assume constant rock mass strength and rely on predefined failure surfaces and discrete triggering events. However, empirical …
-
Monitoring microseismic activity in core samples encased in core flooding apparatus subjected to confining and pore pressures
… to loading/unloading patterns of confining and pore pressures, so as to simulate the environment of underground sandstone formations for carbon storage. The detected AE events were synchronized with the applied pressure profiles to show the temporal clustering of events. A simple one-dimensional …
-
Stability of an embankment on soft clay
… solution to this problem and a discussion of the pore pressures developed in the foundation as the embankment was constructed. The determination of the shear strength parameters of the foundation materials for use in stability analyses and the type of stability analysis used are discussed. The use …
-
Evaluating shear wave velocity and pore pressure data from the seismic cone penetration test
… testing have resulted in the addition of both pore pressure measurements and seismometers. The seismometers allow shear wave velocity testing to be performed at designated intervals. Both of these additions were researched to improve their application and interpretation. The significant factors …
-
Pore Pressure Dissipation and Reconsolidation Observed in Large Scale Experiments of Liquefied Debris Flows
… materials occurs when the generated excess pore pressures dissipate, and grain contacts and effective stress are regained. The evolution of excess pore pressures and their persistence following deposition must be considered in numerical solutions to predict mobility and understand the risk …
-
The axial capacity of driven piles in clay
… driving gives rise to total radial stresses and pore pressures measured on the pile shaft which are lower than predicted. This stress relief is particulary severe in the stiffer clays. The data did however show that the installation total radial stresses and pore pressures are governed by the …
-
Time-dependent slope stability of temporary excavations in soft clay: A numerical study of the undrained to drained transition using combined analysis
… for the time-dependent processes that occur as pore pressures dissipate and soil behaviour transitions from undrained to drained conditions. This transitional phase is well recognized in the ory but lacks a consistent framework for practical application, which can lead to either overly …
-
Stability of buried pipelines subjected to wave loading
… the other on the theory of residual wave induced porewater pressures. Poro-elastic analysis gives the distribution of the transient porewater pressures and the effective stress field induced by the wave loading. The stability of the seafloor can be estimated by application of the Mohr-Coulomb …
-
The spalling of concrete in fires
… Surface spalling is the result of excessive pore pressures within heated concrete. An empirical model has been developed to allow quantification of the pore pressures and a material failure model proposed. The dominant parameters are rate of heating, pore saturation and concrete permeability. …
-
A study of the piezocone penetrometer in normally consolidated clay
… strength were studies and the distribution of pore pressures determined. The meet these objectives laboratory testing was undertaken. Penetration tests were to be performed in tanks of clay consolidated from slurry and maintained under known stresses. An initial series of tests examined the …
-
The piezometer cone penetration test
… in saturated soils can develop large excess pore pressures. The level and sign of the excess pore pressures depend on the volume change characteristics, the strength and the permeability of the soil. The recent addition of pore pressure measurements during cone penetration testing adds a new …
-
Análise numérica de aterro sobre solo compressível utilizando as teorias de estados críticos e de adensamento de Biot
… and numerical values of displacements and excess pore-pressures are compared with both measured values and results of other analysis. Good agreement for displacements, and fairly good agreement for pore-pressures are obtained. To evaluate the long term behaviour of the embankment, a drained and a …
-
Numerical simulation and field verification of inclined piezocone penetration test in cohesive soils
… resistance, sleeve friction and generated excess pore pressures. Coefficient of lateral earth pressure K indicates the degree of initial stress anisotropy. If K=1, no difference is expected between inclined and vertical penetrations. However, for K‚1, the tip resistance, sleeve friction and …
-
Pore Pressure Generation and Shear Modulus Degradation during Laminar Shear Box Testing with Prefabricated Vertical Drains
… modulus degrades as the generation of excess pore pressures begins. One of the methods to mitigate liquefaction, is the use of prefabricated vertical drains. Prefabricated vertical drains provide a drainage path to effectively mitigate the generation of pore pressures and aid in shear modulus …
-
Numerical modeling of residual pore water pressure under cyclic loading: Application to offshore foundation design
This dissertation investigates wave-induced pore-pressure responses and liquefaction potential in saturated, medium-dense sands supporting two critical offshore structures: marine hydrokinetic (MHK) structures and suction anchor foundations. Although these systems differ in geometry and loading …
Page 1 of 12