Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 123 for “"Porous polymer"”.
-
Hierarchically porous polymer monoliths for separation science
… This thesis focuses on the development of porous polymeric materials with dual pore size distributions that meet the requirements for stationary phases for size-based separations.
-
Designing Porous Polymer Systems for Water Treatment Applications
… of new and effective methods of water treatment. Polymer-based solutions offer lightweight, scalable, and inexpensive methods for water filtration while being minimally intrusive to the surrounding environment. In particular, porous polymeric materials have garnered considerable attention due to …
-
Development and Application of Oxidatively Responsive Porous Polymer Networks
… the RANKL pathway. Oxidatively responsive polymers based on sulfide linkages demonstrate the ability to sequester ROS, specifically hydrogen peroxide, at pathophysiologic levels. Furthermore, the polymer networks displayed a high sensitivity to accelerated oxidative degradation media …
-
Fabrication and Modeling of Functionally Graded Porous Polymer Materials
Functionally graded porous materials (FGPMs) are porous materials with porosity gradient distributed over the volume. They have many applications in aerospace, biomedical, and other engineering fields. Despite a lot of effort being made to fabricate FGPMs, the manufacturing processes are either …
-
ELECTROMECHANICALLY ACTIVE POROUS POLYMER MATERIALS FOR AIR-BORNE NOISE ABSORPTION
Sound absorption in porous materials is a process that entails different mechanisms of converting acoustic mechanical energy into heat, including the viscous, thermal and material damping effects. Electromechanically active effect, particularly piezoelectric effect, has only been studied for …
-
Porous Polymer and Hybrid Materials for Efficient Liquid Phase Separation
… challenges. This dissertation focuses on porous polymeric and hybrid materials that are developed as sorbents and membranes for selective adsorption, organic solvent nanofiltration, and water / oil separation applications. The first chapter introduces benchmark industrial separation …
-
Design and optimization of porous polymer enzymatic digestors for proteomics
… even longer enzymatic digestions. In this work, polymer-based monolithic enzyme reactors were fabricated in fused-silica capillaries, and performance was characterized through protein digestion and identification by MALDI-MS and ESI-MS. Trypsin and Staphylococcus aureus V-8 protease (Glu-C) were …
-
Electrically conductive hydrogel with a robust and porous polymer composite coating layer
Conductive hydrogels based on crosslinked polymer networks have garnered significant attention for their potential applications in soft electronics and biomedical engineering. Traditional conductive hydrogels are typically produced by incorporating conductive filler materials, e.g. carbon nanotube, …
-
Processing and properties of thermoplastic nanocomposite foams and porous polymer composite sheets
… polypropylene to produce stronger and porous sheet with up to 40% void fraction. The objective of this research was to explore process limits and products obtained from two different composites with different talc particle size distributions. The limiting maximum linear draw ratio …
-
Microfluidic Synthesis of Macroporous Polymer Particles and Development of Multifunctional Porous Polymer Hybrids
This thesis presents a preparation of porous polymer materials. The first half of this thesis focuses on the microfluidic synthesis of macroporous copolymer microparticles. Macroporous copolymer microparticles have a broad range of applications such as ion exchange resins and sorbents, catalyst …
-
Fabrication and Characterization of a Novel Porous Polymer Microsphere - Hydrogel Composite for Cell Therapy
… composed of a biosynthetic hydrogel containing porous,hydrophobic microparticles. Toward this end, the project examined optimization ofprocessing variables to create porous Strataprene® 3534 polymer microspheres,examined their concentration-dependent effects on hydrogel physicochemical …
-
Development of a Predictive Model for Bulk-Flow Through A Porous Polymer Membrane Tube
… of modeling the mainstream flow in a tube with porous walls, very little has been done experimentally to confirm these various solutions, and what has been done has focused on large sintered metal tubes used in nuclear power applications. Furthermore, these solutions are quite mathematically …
-
Micro-sampling of whole blood and plasme-like fraction collection using porous polymer monolith technology
… work, several limitations were mitigated using porous polymer monoliths as alternative substrates. Accuracy and precision of the prepared samples was improved, while the level of background contaminations associated with the substrate was reduced to a minimum. In addition, taking advantage of …
-
Development Of Metal-organic Framework (MOF) Functionalized Electrospun Porous Polymer Nanofibers For Enhanced CO2 Capture
… loaded amine-based metal organic framework/porous organic polymer composite nanofibers (such as UiO-66/PIM-1), using facile synthesis and gas-assisted electrospinning.
-
Investigation of Porous Polymer Particle Shells Synthesised by RAFT-PISA with pH- and Thermo- Response
Microporous organic polymers (MOPs) with high specific surface areas, low skeletal density, good chemical & thermal stability and ease of functionality are of interest for a range of applications such as gas storage, capture and separations, energy storage, catalysis as well as drug delivery, and …
-
Development and modeling of a fabrication process for high-strength biomimetic porous polymer for medical implants
… and low cell attachment strength. Generating a porous PEEK structure can enhance surface roughness to improve osteoblast adhesion and create tissue interlocks, promoting osteoblast ingrowth. Porous PEEK structures have been fabricated through particulate leaching, chemical etching, and 3D …
Page 1 of 7