Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 95 for “"Porous surfaces"”.
-
Jet impingement on porous surfaces
… of planar and axisymmetric jets onto a porous surface. Six different porous surfaces with open area ratios of 23, 26, 31, 37, 44 and 54% (? = 0.23, 0.26, 0.31, 0.37, 0.44 and 0.54) were placed in low speed (usually 40m/s exit velocity) air jets sufficiently far from the jet exit for the …
-
Flow Over and Past Porous Surfaces
This thesis is concerned with the application of porous treatments as a means of flow and aerodynamic noise reduction. An extensive experimental investigation is undertaken to study the effects of flow interaction with porous media, in particular in the context of the manipulation of flow over a …
-
Acoustical Exploitation of Rough, Mixed Impedance and Porous Surfaces Outdoors
… Sound propagation over different kinds of porous, rough and mixed impedance ground surfaces have been studied experimentally and numerically. Measurements of short-range acoustic level difference spectra over outdoor ground surfaces and artificially-created surfaces outdoors and in the …
-
A Study of Sintered Copper Porous Surfaces for Pool Boiling Enhancement
… the aforementioned parameters through copper porous coatings. In this work, copper substrates were coated with 3M copper powders using a drop coating and screen printing technique. Substrate bonding was achieved by sintering at elevated temperatures. The coated substrates were characterized …
-
Turbulent boundary layer over solid and porous surfaces with small roughness
… solid surface; a sintered metal, porous surface; a"smooth", perforated titanium surface, a solid, rough Dynapore surface made of diffusion-bonded screening, and a porous, rough Dynapore surface. The roughness values were in the low range (k⁺ = 5-7) just above what is normally …
-
Development of Slippery Liquid-Infused Porous Surfaces (SLIPS) using Suspension Plasma Spray
Ice accumulation on aerodynamic surfaces of aircrafts is one of the major threats facing aerospace companies. A potential solution to alleviate the problems caused by aircraft icing is the development of a slippery surface that can delay ice build-up and facilitate its removal. Using suspension …
-
Flow in thin regions bounded by structured and porous surfaces : applications to load bearings
… interest from scientists and engineers. Surfaces of most engineered materials are textured at some level either deliberately to achieve some desired effect or produced by wear and friction of surfaces. This thesis analyses the effect of surface roughness and porosity on the load capacity …
-
An Evaluation of Tape for the Collection of Ignitable Liquid Residues from Non-Porous and Porous Surfaces
… ability to penetrate and/or be removed from a porous material as well as in compatibility with the individual components of an IL. In this work, tapes of a variety of compositions are investigated for direct ILR collection from nonporous and porous surfaces. Tape is a cost-effective absorbent …
-
Development of an Experimental Setup for Aeroacoustic Testing of Porous Surfaces in a Low-Speed Wind Tunnel
… Aiolos Engineering Corporation®, was to test porous surface configurations that could replicate the aerodynamic behaviour of a flat surface while allowing sound to pass through to recessed acoustic treatment. Previous studies have shown that similar surfaces generate aerodynamic noise. The …
-
THE ROLE OF HUMAN NOROVIRUS SURROGATES, FELINE CALICIVIRUS AND MURINE NOROVIRUS, ON NON-POROUS AND SOFT POROUS SURFACES
… Epidemiological evidence suggests that soft surfaces may be a relevant source of HuNoV due to the inability to effectively decontaminate. The objectives of this study were to: 1) review the current published literature on prevalence, transmission, and disinfection pertaining to HuNoV and …
-
The Effects of Porous Surfaces on the Control of Flows over Bluff Bodies of Circular, Square and Rectangular Cross-Sections
… bodies cause the flow to separate from their surfaces, which result in vortices shed from the bodies. Vortex shedding gives rise to large unsteady forces in the wake of the bluff bodies. The control of such forces is of great importance in engineering design because they reduce drag forces, …
-
Disinfectant Efficacy Against SARS-CoV-2 Surrogates, Bovine Coronavirus and Human Coronavirus OC43, on Hard and Soft Non-porous Surfaces
… SARS-CoV-2 survival on different environmental surfaces provides adequate time for secondary transmission to occur. To prevent the further spread of SARS-CoV-2, effective disinfection of surfaces in FSEs is necessary. While disinfectants approved for use against SARS-CoV-2 are found on the …
-
A finite difference numerical model for the propagation of finite amplitude acoustical blast waves outdoors over hard and porous surfaces
… blast waves from explosions over hard and porous media models of outdoor ground surfaces. The nonlinear acoustic propagation effects require a numerical solution in the time domain. To model a porous ground surface, which in the frequency domain exhibits a finite impedance, the linear …
-
Synthesis, characterisation and application of novel quinones for the detection of latent fingermarks
… for the detection of latent fingermarks on porous surfaces; for example 1,2‐indanedione zinc (IND‐Zn), 1,8‐diazafluoren‐9‐one (DFO), and ninhydrin. While these techniques produce excellent results, each has their drawbacks. For example, ninhydrin requires secondary post-treatment and cooling …
-
An evaluation of the mechanisms of recovery of DNA and fingerprints from fire scenes
… of DNA and fingerprints were deposited on both porous and non porous surfaces which were then exposed to laboratory controlled elevated temperatures for various time periods. In each case replicate DNA samples or replicate depleted series of fingerprint samples were used to produce robust data …
Page 1 of 5