Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Position and force control"”.

  1. Model-based adaptive position and force control of robot manipulators

    This thesis is primarily concerned with motion control of robot manipulators with emphasis placed on adaptive impedance control and relevant computational issues. The general approach taken in our studies is a model-based approach, that is, the algorithms developed is based on the dynamic model of …

    uvic Repository record for Model-based adaptive position and force control of robot manipulators (opens in a new tab)

  2. Adaptive position and force control of hydraulic robots, theory, simulation and experiments

    The thesis investigates the adaptive control of hydraulically-actuated manipulators using a Generalized Predictive Control (GPC) algorithm. The feasibility of applying GPC to a two-link hydraulic manipulator is first studied through computer simulation, and its control performance is compared with …

    manitoba Repository record for Adaptive position and force control of hydraulic robots, theory, simulation and experiments (opens in a new tab)

  3. Fingertip position and force control for dexterous manipulation through accurate modeling of hand-exoskeleton-environment

    Despite mechanical advancements in the design of hand exoskeleton devices to help people with hand disabilities regain partial hand function, their manipulation performance has remained far inferior compared to the human hand. State-of-the-art control strategies implemented on exoskeletons are …

    texas Repository record for Fingertip position and force control for dexterous manipulation through accurate modeling of hand-exoskeleton-environment (opens in a new tab)

  4. Sensor integration and controller design for a smart end-effector

    <p>Design, construction and testing of a controller is presented for the parallel jaw end-effector used in the Robotics Research Laboratory (RRL) of the Mechanical And Aerospace Engineering Department at the University of Tennessee, Knoxville.This parallel jaw end-effector is used by a seven …

    ut-knoxville Repository record for Sensor integration and controller design for a smart end-effector (opens in a new tab)

  5. Adults' perspectives of causes and influences on their depression : a thesis presented in partial fulfilment of the requirements for the degree of Doctorate of Clinical Psychology at Massey University, Albany, New Zealand

    … to the parallel robot due to relatively high force together with 6 degree of freedom (DOF) motion all occurring in a small workspace. The Massey Robotic Jaw (MRJ) is a life sized mastication robot of 6RSS parallel mechanism designed with human physiology in mind, and to be capable of …

    massey Repository record for Adults' perspectives of causes and influences on their depression : a thesis presented in partial fulfilment of the requirements for the degree of Doctorate of Clinical Psychology at Massey University, Albany, New Zealand (opens in a new tab)

  6. Position and force trajectory programming within a virtual excavation environment

    … for the automation of repetitive digging tasks and the teleoperation of remote machines. The dynamic adjustment of backhoe end-effector impedance, according to a variable impedance-control strategy, has been proposed for this purpose. This strategy matches machine end-point and environment …

    ubc Repository record for Position and force trajectory programming within a virtual excavation environment (opens in a new tab) Download PDF for Position and force trajectory programming within a virtual excavation environment (opens in a new tab)

  7. IDENTIFYING THE OPTIMUM PROCESS PARAMETERS OF PRECISION GLASS MOLDING FOR ASPHERICAL LENSES

    … Manufacturing Design, Design of Experiments and Metrology (for measuring the geometry of lenses). First, a custom machine is designed and manufactured which can carry out Precision Glass Lens Molding Experiments. This machine is then modified to improve temperature, position and force …

    clemson Repository record for IDENTIFYING THE OPTIMUM PROCESS PARAMETERS OF PRECISION GLASS MOLDING FOR ASPHERICAL LENSES (opens in a new tab)

  8. Motion and Force Control of Flexible Joint Robot Manipulators

    … Also, many industrial applications require the control of the contact forces in order to execute contact tasks properly. This dissertation discusses the development and experimental verification of advanced high performance control algorithms in order to control the position and contact force of …

    mcmaster Repository record for Motion and Force Control of Flexible Joint Robot Manipulators (opens in a new tab)

  9. Hybrid constraint space position/force control

    … contribution, the hybrid constraint space position/force controller for robotic manipulator control in constrained environments. This method is built upon a constraint space dynamic model, where the model parameters are displacement along the constraint trajectory and normal force between …

    ubc Repository record for Hybrid constraint space position/force control (opens in a new tab) Download PDF for Hybrid constraint space position/force control (opens in a new tab)

  10. TOWARDS PASSIVELY COMPLIANT ROBOT STRUCTURES WITH FLEXIBLE LIMBS

    Many robotic manipulators are required to do position and force control when they perform certain constrained motion tasks. In order to achieve good performance, the appropriate compliance at a robot end-effector is an essential requirement. Compliance research is an area of opening interest, it …

    nus Repository record for TOWARDS PASSIVELY COMPLIANT ROBOT STRUCTURES WITH FLEXIBLE LIMBS (opens in a new tab) Download file for TOWARDS PASSIVELY COMPLIANT ROBOT STRUCTURES WITH FLEXIBLE LIMBS (opens in a new tab)

  11. Design and Control of an Exoskeletal Rehabilitation Device for Stroke and Spinal Cord Injury Patients

    … restoring function for upper extremity movements and locomotor skills, demonstrated primarily in stroke populations. In this thesis, I present the design of MAHI Exo-II, a robotic exoskeleton for rehabilitation of the upper extremity after stroke, spinal cord injury, or other brain injuries. The …

    rice Repository record for Design and Control of an Exoskeletal Rehabilitation Device for Stroke and Spinal Cord Injury Patients (opens in a new tab)

  12. Real-Time Control of Bilateral Movement Training System for Stroke Patients

    … movement training process must begin immediately and be systematic and consistent until motor function improves. Robotic assistive systems have been introduced for therapy enhancement. These systems can move the affected limb, allowing for continuous movement training. These systems are often …

    tamu Repository record for Real-Time Control of Bilateral Movement Training System for Stroke Patients (opens in a new tab) Embargoed until 2027-08-01

  13. Real-Time Control of Bilateral Movement Training System for Stroke Patients

    … movement training process must begin immediately and be systematic and consistent until motor function improves. Robotic assistive systems have been introduced for therapy enhancement. These systems can move the affected limb, allowing for continuous movement training. These systems are often …

    tamu Repository record for Real-Time Control of Bilateral Movement Training System for Stroke Patients (opens in a new tab) Embargoed until 2027-08-01

  14. Real-Time Control of Bilateral Movement Training System for Stroke Patients

    … movement training process must begin immediately and be systematic and consistent until motor function improves. Robotic assistive systems have been introduced for therapy enhancement. These systems can move the affected limb, allowing for continuous movement training. These systems are often …

    tamu Repository record for Real-Time Control of Bilateral Movement Training System for Stroke Patients (opens in a new tab) Embargoed until 2027-08-01

  15. Real-Time Control of Bilateral Movement Training System for Stroke Patients

    … movement training process must begin immediately and be systematic and consistent until motor function improves. Robotic assistive systems have been introduced for therapy enhancement. These systems can move the affected limb, allowing for continuous movement training. These systems are often …

    tamu Repository record for Real-Time Control of Bilateral Movement Training System for Stroke Patients (opens in a new tab) Embargoed until 2027-08-01

  16. Real-Time Control of Bilateral Movement Training System for Stroke Patients

    … movement training process must begin immediately and be systematic and consistent until motor function improves. Robotic assistive systems have been introduced for therapy enhancement. These systems can move the affected limb, allowing for continuous movement training. These systems are often …

    tamu Repository record for Real-Time Control of Bilateral Movement Training System for Stroke Patients (opens in a new tab) Embargoed until 2027-08-01

  17. Real-Time Control of Bilateral Movement Training System for Stroke Patients

    … movement training process must begin immediately and be systematic and consistent until motor function improves. Robotic assistive systems have been introduced for therapy enhancement. These systems can move the affected limb, allowing for continuous movement training. These systems are often …

    tamu Repository record for Real-Time Control of Bilateral Movement Training System for Stroke Patients (opens in a new tab) Embargoed until 2027-08-01

Page 1 of 2