Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"Position controller"”.
-
Design and characterization of a thrust vane position controller for exhaust flow deflection TVC with dynamically changing loads
… paths must be followed by autopilots while position commands must be tracked by inner control loops in order to implement the missile's method of thrust vector control (TVC). There are many different methods of TVC that can be used, but for our research, exhaust flow deflection using thrust …
-
Plasma position control in the STOR-M tokamak : a fuzzy logic approach
Adequate control of the position of the plasma column within the STOR-M tokamak is a chief requirement in order for experimental quality discharges to be obtained. Optimal control over tokamak discharge parameters, including the plasma position, is very difficult to achieve. This is due in large …
-
Fatigue mitigation for position controlled floating offshore wind turbines
… a floating offshore wind farm be dynamically repositioned to reduce wake interactions between turbines. However, this relocation strategy has raised concerns that fatigue may be increased. In response to these concerns, this thesis investigates the changes in lifetime fatigue at the tower base …
-
Bang-Bang Practical Stabilization of Rigid Bodies
… missions are required to accurately control the position and orientation of spacecraft actuated by constant-thrust jet-thrusters. To comply with the performance limitations of modern thrusters, we design a feedback controller that does not induce high-frequency switching of the actuators. The …
-
Controle adaptativo robusto para um modelo desacoplado de um robô móvel
… presents a new structure of robust adaptive controller applied to mobile robots (surface mobile robot) with nonholonomic constraints. It acts in the dynamics and kinematics of the robot, and it is split in two distinct parts. The first part controls the robot dynamics, using variable …
-
Robust control of double-rod and single-rod electrohydrostatic actuators: design and implementation
… Therefore, there is a need to design robust controllers capable of dealing with these uncertainties. To design a controller, a mathematical model is usually derived first. One method of deriving a model is the use of physical laws, which is easy to implement. However, this can result in …
-
Comparison of classical and modern control design for a radar antenna drive
… automatic tracking system. This drive requires a position controller In order to insure the desired operating characteristics. The emphasis of this thesis topic is to perform an analysis and design of the physical drive control system by modeling it mathematically. The design of the control system …
-
Robotic Sanding of Wooden Bowls with Hybrid Force/Position Impedance Control
… posed by this thesis is that a hybrid force/position impedance controller can sand the inside of a wooden bowl and mimic the motions and technique of a human operator, and yet be able to deal with conditions of unknown bowl geometry. A CRS A465 robotic arm was used to mimic the arm motion of …
-
Design and implementation of haptic interactions
… display technology by a new type of optimal position controller and better algorithms to handle both holonomic and nonholonomic constraints;Kane's method is introduced to model dynamics of multibody systems. Multibody dynamics of a virtual simulator, a dumbbell, is developed and the …
-
Categorizing Admittance Control Parameters for the Ranger 8-DOF Tele-operated Space Manipulator
Position-based admittance control of a robotic manipulator is a strategy that allows the manipulator to achieve compliance without sacrificing positional accuracy or modifying the underlying position controller. Desired manipulator stiffness and damping can be specified so that the tool tip behaves …
-
Position control of linear ultrasonic motor
This thesis focuses on the position control of linear ultrasonic motor. The deazonepresent in the motor characteristics is compensated using a feedforwardcontrol signal. Linear PI controller has good performance for set-point positiontracking. However, its performance deteriorates for tracking time …
-
Fractional Order Modeling and Control: Development of Analog Strategies for Plasma Position Control of the Stor-1M Tokamak
… tank systems. The fractional order models and controllers are not only simulated, they are also emulated using analog hardware. The main aim of all the above experimentation is to develop a fractional order controller for plasma position control of the Saskatchewan torus-1, modified (STOR-1M) …
-
Target Tracking from a UAV based on Computer Vision
… pitch and roll angles are calculated from the position controller based on the relative position and velocity between the moving target and the quadrotor. Interface between PC and quadrotor is built by controlling the PWM signals of the transmitter for command transmission. Three types of …
-
Multi-Vehicle Cooperation over Rough Terrain: Experiments with Passive Coupling
… and translation. To coordinate the robots, four controllers were evaluated, including Proportional Derivative Controller (PDC), the STJ with a Virtual Damper Controller (VDC), and the SPJ with a Forward Looking Compensator (FLC) and Adaptive Position Controller (APC). In simulation, the VDC …
-
Adaptive Backstepping Hybrid Force Position Control Free-Space and On Contact Operations
A set of adaptive hybrid force-position controllers are designed with the intent of operating in free space and on surface-contact without relying on a switching scheme. The first set of controllers create the framework for a backstepping adaptive hybrid force-position controller, and the second set …
-
Matching feedback with operator intent for efficient human-machine interface
… their intent. Past studies have shown that position control is superior to rate control except when operating large-workspace and/or dynamically slow manipulators and for exact tracking tasks. Operators of large-workspace and/or dynamically slow manipulators do not receive immediate position …
-
Aerodynamic Modelling and Wind Disturbance Rejection of Multirotor Unmanned Aerial Vehicles
… predict the experimental root-mean-square (RMS) position error along the direction of the wind within 7%. A new vectored-thrust controller is then developed based on this model. It comprises a motor mixer converting desired torques and vectored thrust into motor commands, an off-the-shelf …
-
Realtime Motion Planning for Manipulator Robots under Dynamic Environments: An Optimal Control Approach
… are generated as real-time input to the controller as opposed to the predefined trajectory over the entire time duration. This, in essence, captures the dynamic nature of the obstacles. The closed-loop position controller is then engaged to span the robot end-effector along this desired …
-
Semi-Autonomous Guidance and Control of a Saab SeaEye Falcon ROV
… and control algorithms for use as a low-level position controller for ROVs, which will enable semi-autonomous behaviour for the vehicle. Semi-autonomous behaviour is when the pilot issues high-level position commands and the low-level controller handles station keeping and maneuvering between …
-
Control Design and Implementation of an Active Transtibial Prosthesis
… gait of the amputee along with two lower level controllers, a PI moment controller to control the moment during stance and a PID position controller to control the position during stance. The Marquette Prosthesis was successful in mimicking the gait profile presented by Winter. However, after …
Page 1 of 3