Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 94 for “"Position sensors"”.

  1. Gear Fault Detection Using Non-Contact Magnetic Rotation Position Sensors

    … for a low cost non-contact magnetic rotational position sensor. A single stage gearbox operating spur gears was instrumented with these sensors along with typical optical encoders. These rotational position devices were used independently to measure gearbox Transmission Error (TE) during …

    queens Repository record for Gear Fault Detection Using Non-Contact Magnetic Rotation Position Sensors (opens in a new tab)

  2. Steel Gear Fault Diagnostics Using Non-Contact Magnetic Rotational Position Sensors

    … faults using non-contact magnetic rotational position sensors. Like all new methods, the proposed sensor needed to be compared directly to an industry standard technique for measuring shaft rotations. The sensor was tested for its ability to record shaft rotational speed under a variety of …

    queens Repository record for Steel Gear Fault Diagnostics Using Non-Contact Magnetic Rotational Position Sensors (opens in a new tab)

  3. An approach to rollover stability in vehicles using suspension relative position sensors and lateral acceleration sensors

    … the two inputs from the suspension relative position sensors and the lateral acceleration sensor to predict rollover. The input to the suspension relative position sensors could be either due to the vehicle cornering, which results in the outer suspension getting compressed and the inner …

    tamu Repository record for An approach to rollover stability in vehicles using suspension relative position sensors and lateral acceleration sensors (opens in a new tab)

  4. A position-sensing system for the top PMT array in the LUX-ZEPLIN dark matter experiment

    … experiment using high-purity xenon, the sensors installed to monitor the experiment must be custom-made from a short list of acceptable materials. This includes the position sensors that will monitor the relative position of the top photomultiplier tube (PMT) array with respect to the …

    oxford Repository record for A position-sensing system for the top PMT array in the LUX-ZEPLIN dark matter experiment (opens in a new tab)

  5. Flight Telerobotic Servicer

    … and hardware. Also, investigate the absolute position sensors. These are described as near-infinite resolution analog absolute position sensors. Investigation was also conducted on an alternate solution (Vernier Optical Encoder), which was finally were abandoned. Strain-gauge type torque …

    uvic Repository record for Flight Telerobotic Servicer (opens in a new tab)

  6. Automated corn kernel quality inspection using machine vision

    … delivery apparatus, two light-beam-based object position sensors, a strobe light, a control circuit, a video camera and a PC computer with image processing hardware and software.

    uiuc Repository record for Automated corn kernel quality inspection using machine vision (opens in a new tab)

  7. ELIMINATING THE POSITION SENSOR IN A SWITCHED RELUCTANCE MOTOR DRIVE ACTUATOR APPLICATION

    … speed operation, and small rotor inertia. Rotor position information plays a critical role in the control of the SRM. Conventionally, separate position sensors, are used to obtain this information. Position sensors add complexity and cost to the control system and reduce its reliability and …

    uky-thes Repository record for ELIMINATING THE POSITION SENSOR IN A SWITCHED RELUCTANCE MOTOR DRIVE ACTUATOR APPLICATION (opens in a new tab)

  8. Low-cost Rigid-frame Exoskeleton Glove with Finger-joint Flexion Tracking Mapped onto a Robotic Hand

    … consists of an exoskeleton glove (exo-glove), sensors, a microcontroller, and a telerobotic hand. The design of the exo-glove is crafted to fit onto a left hand. SolidWorks was used for the prototype designs which were then sent to the Stratasys 400 rapid prototyping machine to be 3D printed in …

    tamu Repository record for Low-cost Rigid-frame Exoskeleton Glove with Finger-joint Flexion Tracking Mapped onto a Robotic Hand (opens in a new tab)

  9. Microwave interferometric radiometry with satellite formation flight for earth observation

    … 2) the required precision at which the positions of these antennas are maintained for optimal radiometric performance, and the consequences of failing to achieve this precision, 3) the requirements on part of the satellite relative position sensors and thrusters to achieve this …

    soton Download PDF for Microwave interferometric radiometry with satellite formation flight for earth observation (opens in a new tab)

  10. Robotics for nuclear waste handling

    … dual arm industrial robot. A controller for the position control of unconstrained robot arm is also presented. System architecture, hardware configuration and software development are discussed in detail; The experimental set-up consists Remotec's RM-10A dual arm manipulator. Each arm has six …

    unlv Repository record for Robotics for nuclear waste handling (opens in a new tab) Download PDF for Robotics for nuclear waste handling (opens in a new tab)

  11. Closed-Loop Control of a Micropositioner Using Integrated Photodiode Sensors

    A closed-loop control system with photodiode position sensors has been implemented in a microball bearing supported linear electrostatic micromotor to improve accuracy and reliability. The fabrication sequence of the previously developed micromotor was modified to integrate a photodiode-based …

    maryland Repository record for Closed-Loop Control of a Micropositioner Using Integrated Photodiode Sensors (opens in a new tab)

  12. Sensorless starting of a brushless D.C. motor

    … performance servo drives need absolute rotor position sensors. However, the cost of the position sensor limits the use of brush less DC motors for low performance applications such as automotive and home appliances. A sensorless starting scheme for brushless DC motors is studied in this …

    vt Repository record for Sensorless starting of a brushless D.C. motor (opens in a new tab)

  13. An integrated controller for an active magnetic bearing system

    … actuators. An AMB system comprises actuators, position sensors, a controller and power amplifiers. Conventional position sensors for rotor position sensing are expensive. The McTronX Research Group at the North-West University is currently conducting research on self-sensing, a method of …

    nwu-za Repository record for An integrated controller for an active magnetic bearing system (opens in a new tab)

  14. Position/speed sensorless control for permanent-magnet synchronous machines

    … field oriented control, accurate rotor position information, which is usually measured by rotary encoders or resolvers, is indispensable. However, the use of these sensors increases the cost, size, weight, and wiring complexity and reduces the mechanical robustness and the reliability of …

    nebraska Repository record for Position/speed sensorless control for permanent-magnet synchronous machines (opens in a new tab)

  15. Controle inteligente aplicado a uma mesa de coordenadas de dois graus de liberdade

    … as the development of a fuzzy system for its position and trajectory control. The table is composed of two bases that move perpendicularly to each other in the horizontal plane, and are driven by two DC motors. Base position is detected by position sensors attached to the motor axes. A data …

    brazil-ufrn Repository record for Controle inteligente aplicado a uma mesa de coordenadas de dois graus de liberdade (opens in a new tab)

  16. Electronic rotor position sensing of switched reluctance motor

    … (hereafter referred to as SRM) requires rotor position information for successful operation. The rotor position, in the present day, is obtained through a mechanical/electrical sensor mounted on the rotor shaft. These transducers are expensive and take additional space on the rotor shaft. An …

    vt Repository record for Electronic rotor position sensing of switched reluctance motor (opens in a new tab)

  17. Self-sensing algorithms for active magnetic bearings

    … and an increase in reliability. AMBs require position feedback to suspend the rotor. Conventional contactless position sensors are used to measure the rotor's position. The major disadvantages of conventional position sensors are their cost and that the sensors are viewed as a weak point in an …

    nwu-za Repository record for Self-sensing algorithms for active magnetic bearings (opens in a new tab)

  18. An Analysis and Improvement of Brushless DC Motor Control System

    … DC motors are commutated electronically using position sensors. In these systems, mechanical or electromagnetic sensors are used. In sensorless control, rotor back EMF detection is the most popular technique for speed and position control. Detection of back EMF by novel speed independent …

    ndsu Repository record for An Analysis and Improvement of Brushless DC Motor Control System (opens in a new tab)

  19. Cooperative control of dual arm manipulator

    … arm mechanical manipulator. A controller for the position control of unconstrained robot arm without velocity measurements is also presented; The experimental set-up consists Remotec's RM-10A dual arm manipulator. Each arm has six separate motorized motions with position sensors. The arm has also …

    unlv Repository record for Cooperative control of dual arm manipulator (opens in a new tab) Download PDF for Cooperative control of dual arm manipulator (opens in a new tab)

Page 1 of 5