Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Post-buckling analysis"”.

  1. Asymptotic post-buckling analysis by Koiter's method with a general purpose finite element code

    … sometimes leading to a great decrease in buckling load. Koiter showed that the effect of initial imperfections is largely determined by the initial post-buckling behavior of the perfect structure. The present work seeks to implement Koiter’s method of asymptotic post-buckling analysis on a …

    vt Repository record for Asymptotic post-buckling analysis by Koiter's method with a general purpose finite element code (opens in a new tab)

  2. Thermal Bending, Buckling and Post-Buckling Analysis of Unsymmetrically Laminated Composite Beams with the Effects of Moisture and Geometric Imperfections

    … the analytical study of the thermal bending, buckling, and post-buckling of unsymmetrically laminated composite beams with imperfection under hygrothermal effects. Three different boundary conditions will be considered on this study. The non-linear governing partial differential equations are …

    embry-riddle Repository record for Thermal Bending, Buckling and Post-Buckling Analysis of Unsymmetrically Laminated Composite Beams with the Effects of Moisture and Geometric Imperfections (opens in a new tab)

  3. The buckling and post-buckling behaviour of simply supported rectangular plates with centrally located circular holes

    This thesis describes an investigation into the buckling, post-buckling behaviour and collapse of simply supported square and rectangular plates with centrally located circular holes. The review of the current literature is preceded by a brief description of the approximate methods of plate …

    strathclyde Repository record for The buckling and post-buckling behaviour of simply supported rectangular plates with centrally located circular holes (opens in a new tab)

  4. Stretch-induced compressive stress and wrinkling in elastic thin sheets

    A finite element analysis approach is used to determine the susceptibility to wrinkles for thin sheets with clamped ends when subjected to tensile loading. The model problem chosen to do this analysis is the stretching of a thin sheet with clamped-ends. In the preliminary analysis, a stress …

    texas Repository record for Stretch-induced compressive stress and wrinkling in elastic thin sheets (opens in a new tab)

  5. An incremental total Lagrangian formulation for general anisotropic shell-type structures

    … are developed for the geometric nonlinear analysis of general shell-type structures, anisotropic as well as isotropic. Compatibility and completeness requirements are stressed in modelling the general shell-type structures in order to assure the convergence of the finite-element analysis. …

    vt Repository record for An incremental total Lagrangian formulation for general anisotropic shell-type structures (opens in a new tab)

  6. Failure Prediction of Honeycomb Panel Joints using Finite Element Analysis

    … panel joint capability using finite element analysis (FEA) is possible. This allows for the potential elimination of coupon testing early in a spacecraft design program to determine joint capability. Linear finite element analysis (FEA) in NX Nastran was used to show that adhesive failure can …

    vt Repository record for Failure Prediction of Honeycomb Panel Joints using Finite Element Analysis (opens in a new tab)

  7. Layerwise theory for discretely stiffened laminated cylindrical shells

    … cylindrical shells for stress, vibration, pre-buckling and post-buckling analysis. The layerwise theory reduces a three-dimensional problem to a two-dimensional problem by expanding the three-dimensional displacement field as a function of a surface-wise two-dimensional displacement field and a …

    vt Repository record for Layerwise theory for discretely stiffened laminated cylindrical shells (opens in a new tab)

  8. Stretch-induced wrinkling of thin sheets

    … the applied tensile strain. Next, an eigenvalue analysis was performed to predict the critical conditions for buckling of the elastic sheet under the prescribed boundary conditions, followed by a nonlinear post-buckling analysis to simulate evolution of stretch-induced wrinkles. Experiments were …

    texas Repository record for Stretch-induced wrinkling of thin sheets (opens in a new tab)

  9. Wrinkling of Membrane and Thin Film under Torsion

    … with those from the commercial finite element analysis software ABAQUS. In the eigenvalue and eigenmode buckling analysis with finite element method, the number of wrinkles is relatively sensitive to the pre tensile stretching, the mesh size and the element types, especially for the thin …

    cuny Repository record for Wrinkling of Membrane and Thin Film under Torsion (opens in a new tab)

  10. Fracture and delamination of elastic thin films on compliant substrates : modeling and simulations

    … structures. One common approach used in fracture analysis is based on the principle of linear elastic fracture mechanics (LEFM), which assumes pre-existing cracks and treats the materials as linear elastic except for the damage zone around the crack tip. Alternatively, a nonlinear cohesive zone …

    texas Repository record for Fracture and delamination of elastic thin films on compliant substrates : modeling and simulations (opens in a new tab)

  11. Multiphysics modeling of soft materials using material point method

    … convergence but also complicate eigenvalue analysis, which is crucial for modeling mechanical instabilities under compression. The second part addresses these limitations via a Nitsche-enhanced, subdivision-stabilized extended B-spline mixed u-p framework. The extended B-spline shape …

    texas Repository record for Multiphysics modeling of soft materials using material point method (opens in a new tab)

  12. Basic Testing and Strength Design of Corrugated Board and Containers

    … of corrugated board and containers during buckling and collapse. The aim was to create a practical tool for strength analysis of boxes that can be used by corrugated board box designers. This tool is based on finite element analysis. The first studies concerned testing and analysis of …

    lund Repository record for Basic Testing and Strength Design of Corrugated Board and Containers (opens in a new tab) Download PDF for Basic Testing and Strength Design of Corrugated Board and Containers (opens in a new tab)

  13. Geometric nonlinearity effects on the behavior of sandwich structures

    … can be realized only if it is stabilized against buckling. As a compound structure, a sandwich structure has more complicated stability behavior than an ordinary beam. The compressibility of the core significantly affects the stability response and contributes to the local instability phenomenon. …

    gatech Repository record for Geometric nonlinearity effects on the behavior of sandwich structures (opens in a new tab)

  14. More efficient cold-formed steel elements and bolted connections

    … due to the inherent weaknesses of premature buckling behaviour of members and the low ductility of connections. Consequently, current design guidelines of CFS systems are very conservative especially in the case of seismic design. Furthermore, there is no generic optimisation framework for …

    whiterose Download PDF for More efficient cold-formed steel elements and bolted connections (opens in a new tab)

  15. Topology optimization with natural frequency and structural stability criteria using eigenvector aggregates

    … its applications in natural frequency and buckling optimization, as well as the ability to hand the repeated eigenvalues. Additionally, this work presents efficient methods for computing eigenvector-based derivatives and validates these methods in the thermal, natural frequency, and …

    gatech Repository record for Topology optimization with natural frequency and structural stability criteria using eigenvector aggregates (opens in a new tab)