Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 289 for “"Potentiodynamic"”.

  1. Electrochemical Disinfection of Liquid Human Waste Using Potentiodynamic Methods and Controlled Electrode Surface Chemistry

    … It is found that both can be operated in potentiodynamic modes to control surface chemistry and improve generation of biocidal oxidants such as hydrogen peroxide and chlorine</p><p>in blackwater containing solutions. Use of a packed-bed electrochemical reactor is also studied in the …

    duke Repository record for Electrochemical Disinfection of Liquid Human Waste Using Potentiodynamic Methods and Controlled Electrode Surface Chemistry (opens in a new tab)

  2. Structural characterization, biomechanical properties, and potentiodynamic polarization behavior of nickel-titanium orthodontic wire alloys

    … structures, biomechanical properties and potentiodynamic polarization behavior for a wide variety of nickel-titanium orthodontic wire alloys have been investigated. These parameters were determined using x-ray diffraction techniques, differential scanning calorimetry, bending and tension …

    marquette Repository record for Structural characterization, biomechanical properties, and potentiodynamic polarization behavior of nickel-titanium orthodontic wire alloys (opens in a new tab)

  3. Síntese e caracterização de ligas nanocristalinas à base de cobre e zircônio com elevada capacidade de formação de estado vítreo

    … were performed through nanoindentation, potentiodynamic polarization and hydrogenation followed by thermal dessorption spectrometry experiments. Nanoindentation results did not show appreciable difference between samples produced conventionally and with suction casting. Potentiodynamic …

    brazil-uerj Repository record for Síntese e caracterização de ligas nanocristalinas à base de cobre e zircônio com elevada capacidade de formação de estado vítreo (opens in a new tab)

  4. Corrosion of titanium and titanium alloys in aqueous acid electrolyte

    … using open circuit potential measurements, potentiodynamic techniques, and long term immersion testing. The effects of acid concentration, alloying addition, temperature, and the iron and chloride content of the electrolyte were examined. The open circuit potential measurements resulted in …

    ubc Repository record for Corrosion of titanium and titanium alloys in aqueous acid electrolyte (opens in a new tab) Download PDF for Corrosion of titanium and titanium alloys in aqueous acid electrolyte (opens in a new tab)

  5. Electrochemical dissolution and passivation behavior of iron in ammoniacal caron leaching solution

    … and Fe-ammines during anodic polarization. The potentiodynamic experiments were done in 6M total NH₃[3M NH₄OH and 1.5M (NH₄4)₂CO₃] solution. Different experimental parameters such as temperature (15°, 25°, 35°, 45° and 55°C) and pH (6, 8, 10 and 12) were used. Pure oxygen and argon gas was …

    ubc Repository record for Electrochemical dissolution and passivation behavior of iron in ammoniacal caron leaching solution (opens in a new tab) Download PDF for Electrochemical dissolution and passivation behavior of iron in ammoniacal caron leaching solution (opens in a new tab)

  6. Characterization of the corrosion behavior of high damping alloys in seawater.

    … synthetic and natural seawater. The results of potentiodynamic polarization and polarization resistance measurements made in the laboratory were compared with the results of actual sea exposures at the LaQue Center for Corrosion Technology, Wrightsville Beach, North Carolina. These results were …

    nps Repository record for Characterization of the corrosion behavior of high damping alloys in seawater. (opens in a new tab)

  7. Corrosion of lead anodes in metallic electrowinning environments

    … thesis included open circuit potential (OCP), potentiodynamic, and potentiostatic polarizations. The parameters studied include; icorr, Ecorr, slope of the oxygen evolution region and O₂ potential. For Zn electrowinning, variables changes included modifying H₂SO₄, Mn²⁺, Cl⁻, Zn²⁺ concentrations …

    ubc Repository record for Corrosion of lead anodes in metallic electrowinning environments (opens in a new tab) Download PDF for Corrosion of lead anodes in metallic electrowinning environments (opens in a new tab)

  8. CORROSION STUDY OF SOLID AND POROUS TITANIUM FOR SURGICAL IMPLANT APPLICATIONS

    … using open-circuit potential (OCP) measurements, potentiodynamic measurements, electrochemical impedance spectroscopy (EIS) and capacitance study. The modelling of the experimental results is also performed for analysis and prediction purposes. OCP measurements revealed that the presence of pores …

    nus Repository record for CORROSION STUDY OF SOLID AND POROUS TITANIUM FOR SURGICAL IMPLANT APPLICATIONS (opens in a new tab) Download file for CORROSION STUDY OF SOLID AND POROUS TITANIUM FOR SURGICAL IMPLANT APPLICATIONS (opens in a new tab)

  9. Hydrophobicity of Magnetite Coating on Low Carbon Steel

    … Fourier transform infrared spectroscopy (FTIR), potentiodynamic polarization test, electrochemical impedance spectroscopy (EIS), and qualitative characterization of self-cleaning behavior, antifouling property and durability of the coatings are assessed. A water contact angle as high as 152o on …

    unt Repository record for Hydrophobicity of Magnetite Coating on Low Carbon Steel (opens in a new tab)

  10. The aqueous corrosion characteristics of nickel aluminides

    … using (a) immersion corrosion tests, (b) cyclic potentiodynamic measurements and (c) electron spectroscopy for chemical analysis (ESCA) techniques.</p> <p>The immersion mass-loss tests were conducted in 15 different solutions at 25°C and 95°C. The nickel aluminides were found to have good …

    ut-knoxville Repository record for The aqueous corrosion characteristics of nickel aluminides (opens in a new tab)

  11. Anodic polarisation behaviour of copper in chloride and bromide solutions containing benzotriazole, tolyltriazole, and methylbenzimidazole

    … 8.39 x 10⁻⁴ M and at pH values of 6.0 and 3.0. Potentiodynamic polarisation studies were used to gather information that was then compared to the established potential-pH equilibria. Polarisation scan rates of 1 mV/s and 0.2 mV/s were used. Inhibition of the anodic dissolution reactions was …

    ubc Repository record for Anodic polarisation behaviour of copper in chloride and bromide solutions containing benzotriazole, tolyltriazole, and methylbenzimidazole (opens in a new tab) Download PDF for Anodic polarisation behaviour of copper in chloride and bromide solutions containing benzotriazole, tolyltriazole, and methylbenzimidazole (opens in a new tab)

  12. Assessing and Enhancing Seawater Corrosion Performance of Aluminum Alloy 7075 and 2024 Additive Repairs Produced by Cold Gas Dynamic Spray Deposition

    … can have very similar activity, reactivity, and potentiodynamic response compared to their wrought counterparts, and that CS deposits can even have superior pitting performance. CS corrosion properties, especially activity, change depending on powder heat treatment due to the resulting …

    alabama Repository record for Assessing and Enhancing Seawater Corrosion Performance of Aluminum Alloy 7075 and 2024 Additive Repairs Produced by Cold Gas Dynamic Spray Deposition (opens in a new tab)

  13. Characterization and corrosion of BCC-tantalum coating deposited on aluminum and steel substrate by DC magnetron sputtering

    … of tantalum coating was evaluated using potentiodynamic and potentiostatic methods. Potentiodynamic test carried out on bcc tantalum coated aluminum and steel revealed a very low corrosion current density, indicating good corrosion resistance. Tetragonal tantalum coated on aluminum was …

    njit Repository record for Characterization and corrosion of BCC-tantalum coating deposited on aluminum and steel substrate by DC magnetron sputtering (opens in a new tab)

  14. Corrosion of Carbon Steel in Synthetic Coal Liquid Wash Waters

    The Potentiodynamic corrosion measuring technique is an electrochemical analytical method which measures corrosion rates of a metal exposed to a corrosive environment. The corrosion characteristics of carbon steel A1044 in aqueous solutions of aniline hydrochloride,simulating a coal liquid wash …

    wku-diss Repository record for Corrosion of Carbon Steel in Synthetic Coal Liquid Wash Waters (opens in a new tab)

  15. Enhancing Corrosion Performance of Laser Modified NiTi Shape Memory Alloy

    … to determine the crystallinity of the oxide and potentiodynamic cyclic polarization was used to determine oxide stability. Results showed that for a small number of pulses (i.e. low total energy input) corrosion performance was determined primarily by topographical effects. However, increasing …

    waterloo Repository record for Enhancing Corrosion Performance of Laser Modified NiTi Shape Memory Alloy (opens in a new tab)

  16. Corrosion Performance of MIG Welded Cu-lean AA7xxx Alloys

    … for cyclic corrosion testing (GMW-14872), and potentiodynamic polarization measurements. The effect of exposure to GMW-14872 on the tensile-shear behaviour of the various weld configurations under study was also investigated using a custom tensile jig. Examination post exposure to ASMT G85-A2 …

    mcmaster Repository record for Corrosion Performance of MIG Welded Cu-lean AA7xxx Alloys (opens in a new tab)

  17. Design and Verification of a Rotating Cylinder Electrode for Corrosion Investigation of Structural Metals in Nitrate Molten Salt

    … of stainless-steel 316 electrode using potentiodynamic polarization scans to observe the effects of rotational speed on the corrosion of the electrode. Changing RCE rotation rates showed visible changes in the anodic portion of the potentiodynamic scan, providing validation that an …

    unr Repository record for Design and Verification of a Rotating Cylinder Electrode for Corrosion Investigation of Structural Metals in Nitrate Molten Salt (opens in a new tab)

  18. Synthesis and Characterization of Ag and Cu doped DLC Thin Films for Anti-microbial Applications

    … corrosion performance was investigated using potentiodynamic polarization tests. The results showed appreciable reduction in residual stress and a slight decrease in hardness with Ag doping up to 13.2 at.% and Cu doping up to 8.1 at.%. However, higher doping levels drastically reduced …

    sask Repository record for Synthesis and Characterization of Ag and Cu doped DLC Thin Films for Anti-microbial Applications (opens in a new tab)

  19. Corrosion Behavior of Nuclear Waste Storage Canister Materials

    … Electrochemical behavior was evaluated using potentiodynamic polarization tests, and the surface morphology was studied using optical microscopy and scanning electron microscopy. Potentiodynamic polarization tests were conducted in 1.0M NaNO3 + 0.1M NaOH and 1.0M NaNO3 + 0.1M NaOH + 0.02M …

    unr Repository record for Corrosion Behavior of Nuclear Waste Storage Canister Materials (opens in a new tab)

  20. The effect of Ce Microalloying and Thermomechanical Processesing on The Corrosion Behaviour of TS Cast AA5182 Aluminum Alloy

    … (DC) cast counterparts in HNO₃ using immersion, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) testing. The effects of 0.15 wt.% Ce addition, 70% cold rolling, and annealing at 400 °C for 3 h were then investigated in 3.5 wt.% NaCl. Microstructure and corrosion …

    queens Repository record for The effect of Ce Microalloying and Thermomechanical Processesing on The Corrosion Behaviour of TS Cast AA5182 Aluminum Alloy (opens in a new tab)

Page 1 of 15