Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 72 for “"Powder mixture"”.
-
Fabrication and characterization of advanced materials using laser metal deposition from elemental powder mixture
… metallic components by using various elemental powder mixture according to the following three categories of research topics. The first research topic is to investigate and develop a cost-effective possibility by using elemental powder mixture for metallic components fabrication. Based on the …
-
Modeling and experimental investigations on particle dynamic behaviors in laser 3D printing with blown powder
"Pre-mixed powder is frequently-used powder supply to fabricate Functional Gradient Material (FGM) by Laser 3D printing, which is also called Laser Metal Deposition (LMD). The deposited FGM composition is expected to be similar or same as supplied powder mixture. However, because pre-mixed powder …
-
Analysis of brazing effects on hot corrosion behavior of an aerospace superalloy
… superalloy. However, application of composite powder mixture, which consists of additive superalloy powder, enhanced the hot corrosion resistance of brazed samples. It is also found that although the use of composite powder mixture increased hot corrosion resistance of brazed alloy, if the …
-
PROCESSING AND CHARACTERIZATION OF TINI-BASED ALLOYS FABRICATED BY LASER AIDED MANUFACTURING
<p>"Laser powder-based directed energy deposition (DED) is a major laser aided additive manufacturing (AM) process for metals. It applies laser energy to deposit metal powders to form 3D metal parts. Apart from manufacturing traditional alloys, DED can also be used to develop advanced alloys with …
-
The Effect of Powder Characteristics and Processing Conditions on the Microstructure and Mechanical Properties of Titanium Alloys Made by Powder Forging
Powder compact forging was used to produce Ti and Ti-6Al-4V rocker arms using pre-alloyed and blended elemental powders. Green powder compacts with high relative density were manufactured by warm compaction. Due to the characteristics of raw powders, interlocking and cold welding are the main …
-
Evaluation of the matrix-forming ability of chitosan through direct compression using a freely water-soluble drug
… was a very challenging task due to the physical powder properties of chitosan. The compressibility of chitosan was evaluated in the initial phase and the results revealed that chitosan could not be compressed as a single component mixture. The following step was to improve the compressibility of …
-
Effects of high energy mechanical milling on the kinetics of solid state reactions
… heating of the high energy mechanically milled powders. Results showed that nucleation and lateral growth along the interface region occurred at different temperatures from the diffusion controlled transverse growth. The amount of new phase formed through nucleation and lateral growth along the …
-
Numerical Simulation and Experimental Study of Transient Liquid Phase Bonding of Single Crystal Superalloys
… single crystal substrates by using a composite powder mixture of brazing alloy and base alloy as the interlayer material, which prior to the present work has been reported to be unsuitable. This was experimentally verified and the use of the composite powder mixture as interlayer material to …
-
Mechano-chemical synthesis of amorphous manganese borohydride, the effect of catalytic additives on its hydrogen generation properties, and crystallization during solvent extraction
… activation synthesis (MCAS) from a mixture of sodium borohydride, NaBH4, and manganese chloride, MnCl2, is the candidate explored in this thesis. The effect of catalytic additives graphene and ultrafine filamentary carbonyl nickel (Ni), in addition to lithium amide (LiNH2) is also …
-
Laser Processing of Refractory Metal - Refractory Carbide Alloys
… fabrication system and axissymmetric laser powder deposition system. W-Ti-C alloy based protective coatings were deposited on graphite substrates, through laser melting of pre-placed powder mixture, to widen the use of carbon structural elements for high temperature applications. A method …
-
Encapsulation of dried yeast cells as probiotics by tabletting
… however, the main challenge of tabletting a powder mixture containing yeast granules is the mechanical sensitivity of the cells. The objective of this work was to develop a rigid yeast tablet containing adequate numbers of viable yeast cells by optimizing the formulation to allow a relatively …
-
Analysis and modeling of direct selective laser sintering of two-component metal powders
… that 3-D parts are built from the metal-based powder bed with CAD data. A one-dimensional analytical model of melting in a two-component powder layer with finite thickness subjected to a constant heat flux heating and a two-dimensional numerical model of SLS of a two-component powder layer with …
-
Selective laser melting of Ti-35NB alloy: Processing, microstructure and properties
… conventional manufacturing processes, such as powder metallurgy, casting, forging, and rolling, have already shown their excellent ability to manufacture a large variety of parts and efficiently yield high volume products. Nevertheless, there are still many obstacles in manufacturing metallic …
-
Avaliação microestrutural dos efeitos de grafeno em revestimentos a base de metal duro para aplicações em ativos petrolíferos
… and mixed with tungsten carbide – 12 wt% cobalt powder mixture with four different concentrations of 0, 0.5, 0.75, and 1 wt%. The prepared mixtures were thermally sprayed on 1020 steel plates using HVOF thermal spray technique. Powder mixtures and applied coatings were characterized by XRD, …
-
Laser In-Situ Combinatorial Carbide Coating on Steel
… of a AISI 1010 steel deposited with a precursor powder mixture of Fe, Ti, Cr and C. With the help of laser surface engineering, carbide composite coating on the surface of plain C steel was achieved. It is envisioned that such a coating will offer superior tribological properties.</p> <p>Energy …
-
Effects of Particle Size Distribution & Laser Energy Density on Selective Laser Sintered Pharmaceutical Tablets
… via selective laser sintering (SLS), which is a powder bed fusion additive manufacturing method. SLS of pharmaceuticals is a flexible and advantageous approach to pharmaceutical manufacturing which provides significant customizability in conjunction with game-changing advantages such as …
-
Synthesis of Transition Metal Aluminides from Elemental Powder Mixtures
… the formation of these compounds from elemental powder mixtures is the focus of this thesis. This work presents differential scanning calorimeter (DSC) studies on the formation of aluminides in the Ti-Al, Fe-Al, Nb-Al, Ta-Al binary systems and extended to the ternary Al-Ni-Ti system. The …
-
Complex Carrier Particles for Inhalation
The interactive powder mixture is the most widely used approach for dry powder formulations in pulmonary drug delivery, combining micronised drug with a coarse excipient, typically lactose. The excipient improves flowability and aerosolisation, while fine drug particles adhere to its surface and …
-
Shock compaction and impact response of thermite powder mixtures
… the dynamic densification behavior of thermite powder mixtures consisting of equivolumetric mixtures of Ta + Fe₂O₃ and Ta + Bi₂O₃. Of primary importance to these highly reactive powder mixtures is the ability to characterize the stress at which full compaction occurs, the crush strength, which …
Page 1 of 4