Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Power Delivery Networks"”.
-
Design Optimization of Power Delivery Networks in Packaging
… to investigate design optimization methods for power delivery networks (PDNs) in packaging. The increasing demand for high operating frequencies and transistor density in integrated circuits (ICs) within high-performance computing systems has led to faster transients and higher currents, causing …
-
Design of power delivery networks for noise suppression and isolation using power transmission lines
In conventional design of power delivery networks (PDNs), the PDN impedance is required to be less than the target impedance over the frequency range of interest to minimize the IR drop and to suppress the inductive noise during data transitions. As a result, most PDNs in high-speed systems consist …
-
Security Analysis of Hidden Analog-Domain Vulnerabilities in Digital Electronic Systems: A Deep Dive into Power Delivery Networks
The Power Delivery Network (PDN) is an essential universal sub-system for any electronic system to operate correctly. Modern electronic systems are growing exponentially in their functionalities and complexity, and so does the sophistication of the PDNs they must depend on. Consequently, these …
-
Design of power delivery networks using power transmission lines for high speed I/O signaling in complex electronic systems
A power distribution network (PDN) is designed to provide clean power and facilitate high signal integrity in modern electronic systems. However, the design of a good PDN has faced challenges due to increased number of voltage rails in a design, stringent low noise requirement, and increased …
-
Modeling, design, fabrication and characterization of power delivery networks and resonance suppression in double-sided 3-D glass interposer packages
Effective power delivery in Double-sided 3-D glass interposer packages was proposed, investigated, and demonstrated towards achieving high logic-to-memory bandwidth. Such 3-D interposers enable a simpler alternative to direct 3-D stacking by providing low-loss, wide-I/O channels between the logic …
-
Scalable Analysis, Verification and Design of IC Power Delivery
… process scaling into the nanometer regime, power delivery network design faces many challenges that set more stringent and specific requirements to the EDA tools. For example, from the perspective of analysis, simulation efficiency for large grids must be improved and the entire network with …
-
Algorithms for large - scale power delivery network analysis on massively parallel architectures
The on-chip power delivery network constitutes a vital subsystem of modern nanometer-scale integrated circuits, since it affects in a critical way the performance and correct operation of the devices. As technology scaling enters in the nanometer regime, there is an increasing need for accurate and …
-
Low-Power, High-Gain Amplifiers for Power Management Applications
… great emphasis on battery life leading to low-power designs being highly desirable. High gain is difficult to achieve in low-voltage, low-power circuits because stacking transistors is no longer an option. The solution is to cascade gain stages while ensuring that the amplifier remains stable …
-
Modeling, Design and Optimization of IC Power Delivery with On-Chip Regulation
… designers have been constantly challenged with power delivery issues. While useful power must be reliably delivered to the on-die functional circuits to fulfill the desired functionality and performance, additional power overheads arise due to the loss associated with voltage conversion and …
-
Opportunistic power reassignment between processor and memory in 3D stacks
… cost of a die. In 3D processor-memory designs, power and ground (P/G) pins can account for the majority of the pins. This is because packages include separate pins for the disjoint processor and memory power delivery networks (PDNs). Supporting separate PDNs and P/G pins for processor and memory …
-
Reliable clock and power delivery network design for three-dimensional integrated circuits
… thesis is to design reliable clock-distribution networks and power-delivery networks for three-dimensional integrated circuits (3D ICs) using through-silicon vias (TSVs). This dissertation supports this goal by addressing six research topics. The first four works focus on 3D clock tree synthesis …
-
Power and signal integrity of printed circuit boards
… in three key areas, including thermal behavior, power integrity (PI) and signal integrity (SI). Different design options were evaluated using simulations, which were later compared to measurements on physical boards. The simulated temperature and voltage drop of the PCB matched well with the …
-
On-die adaptive power regulation and distribution for digital loads
… objective of this dissertation is to provide a power architecture solution where guardband reduction and consistent performance are the key goals for power delivery networks in multicore SoCs. The necessity for maximizing energy efficiency without compromising performance has led to the …
-
Feedback-Directed Management of Performance and Power for Emerging Computer Systems
… management challenge of both performance and power simultaneously. For example, distributed real-time embedded systems such as cyber-physical systems need to reduce power consumption while enforces CPU utilization bounds on multiple uniprocessors in order to meet end-to-end deadlines. Data …
-
Modeling and simulation of silicon interposers for 3-d integrated systems
… development of a hybrid modeling approach for power delivery networks (PDN) with through-silicon vias (TSVs). The proposed approach extends multi-layer finite difference method (M-FDM) to include TSVs by extracting their parasitic behavior using an integral equation based solver. 4. The …
-
Circuit Design and Modeling Techniques of On-chip Power Delivery Modules
Designing an efficient power delivery network is one of the most important aspects of modern low-power microprocessor designs. Power delivery network consists of off-chip converters, wires/bumps to route power and ground signals from off-chip converters to inside the chip, on-chip converters, and …
-
Design and Demonstration of Embedded Inductors for High-Voltage Integrated Voltage Regulators
… systems have resulted in the need for higher power density. Current multi-stage 48 V to 1 V power delivery networks shows efficiencies of 75% or lower. Substrate-embedded inductors can enable the miniaturization of power modules and Integrated Voltage Regulators (IVRs) making possible …
-
Correlation of PDN impedance with jitter and voltage margin in high speed channels
… these channels. Therefore, optimal design of the power delivery network (PDN) is required to reduce SSN induced noise and jitter and improve the performance of high speed channels. The design of PDN is done in frequency domain whereas jitter and noise are time domain events. As a result, multiple …
-
Circuit and System Level Design Optimization for Power Delivery And Management
… VLSI technology scales to the nanometer scale, power consumption has become a critical design concern of VLSI circuits. Power gating and dynamic voltage and frequency scaling (DVFS) are two effective power management techniques that are widely utilized in modern chip designs. Various design …
-
Electrical-thermal modeling and simulation for three-dimensional integrated systems
… electrical and thermal characteristics for power delivery networks (PDNs) in steady state and the thermal effect on characteristics of through-silicon via (TSV) arrays at high frequencies. The steady-state electrical-thermal interaction for PDNs is addressed by developing a voltage …
Page 1 of 2