Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"Power Routing"”.

  1. Steady-State Analysis and Optimal Power Routing of Standalone Unbalanced Hybrid AC/DC Microgrids

    … attention as a potential solution to deliver power from DGs to modern dc loads with reduced conversion stages. Moreover, hybrid ac/dc microgrids have been introduced as a paradigm combining the benefits of the two types of microgrids by interconnecting them through interlinking converters …

    waterloo Repository record for Steady-State Analysis and Optimal Power Routing of Standalone Unbalanced Hybrid AC/DC Microgrids (opens in a new tab)

  2. The Design of Ad Hoc Networks with Minimum Power and Maximum Battery Life

    … the terminals in these networks are battery powered and so, to maximise the lifetime of, the network, the power consumption of each node needs to be managed. This thesis studies the optimum design of a multi-hop ad hoc network. Each layer is analysed and cross layering is considered where it …

    oxford-brookes Repository record for The Design of Ad Hoc Networks with Minimum Power and Maximum Battery Life (opens in a new tab) Download PDF for The Design of Ad Hoc Networks with Minimum Power and Maximum Battery Life (opens in a new tab)

  3. Control Strategies for Improving Reliability and Efficiency in Modular Power Converters

    The significance of modular power converters has escalated drastically in various applications such as electrical energy distribution, industrial motor drives and More Electric Aircraft (MEA) owing to the benefits such as scalability, design flexibility, higher degree of fault tolerance and better …

    cau-kiel Repository record for Control Strategies for Improving Reliability and Efficiency in Modular Power Converters (opens in a new tab)

  4. Impact of Power Router Control on Electricity Markets

    … a methodology that enables determination of how power routers impact the electric power system and electricity markets. A power router is a power electronics-based device that enables control of real power flows in a transmission system. Power router technology is maturing to the point of …

    gatech Repository record for Impact of Power Router Control on Electricity Markets (opens in a new tab)

  5. Active thermal control of power electronic modules in smart transformer applications

    … To address this problem, the knowledge of power system, power electronics and reliability is combined in this work. Following the "Physics of failure" approach, the most frequently failing components are identified, their load profile in the electrical distribution grid is analyzed and …

    cau-kiel Repository record for Active thermal control of power electronic modules in smart transformer applications (opens in a new tab)

  6. Passive thermal management of distribution grid assets

    … the passive thermal management of high-voltage power electronics converters for use in augmented grid assets capable of performing power routing on the electricity grid. The work has focused on the thermal transport of single-phase closed thermosiphon systems incorporating a secondary parallel …

    gatech Repository record for Passive thermal management of distribution grid assets (opens in a new tab)

  7. The localized Delaunay triangulation and ad-hoc routing in heterogeneous environments

    Ad-Hoc Wireless routing has become an important area of research in the last few years due to the massive increase in wireless devices. Computational Geometry is relevant in attempts to build stable, low power routing schemes. It is only recently, however, that models have been expanded to consider …

    sask Repository record for The localized Delaunay triangulation and ad-hoc routing in heterogeneous environments (opens in a new tab)

  8. Thermal Management of Power Electronic Converters in Electric Motor Drives Using Active Thermal Control and Active Cooling

    The application of power electronic converters (PEC) in electric vehicles (EVs) has significantly increased due to their enhanced controllability and flexibility. Additionally, Permanent Magnet Synchronous Machines (PMSMs) are favored in EVs for their higher torque, efficiency, performance, and …

    clemson Repository record for Thermal Management of Power Electronic Converters in Electric Motor Drives Using Active Thermal Control and Active Cooling (opens in a new tab)

  9. Modeling and optimization of a thermosiphon for passive thermal management systems

    An optimally designed thermosiphon for power electronics cooling is developed. There exists a need for augmented grid assets to facilitate power routing and decrease line losses. Power converter augmented transformers (PCATs) are critically limited thermally. Conventional active cooling system …

    gatech Repository record for Modeling and optimization of a thermosiphon for passive thermal management systems (opens in a new tab)

  10. Modeling and Characterization of P-Type Silicon Carbide Gate Turn off Thyristors

    Silicon carbide (SiC) power semiconductor devices have emerged in the past decade as the most promising technology for next generation power electronic applications ranging for electric vehicles to grid-connected power routing and conversion interfaces. Several devices have been developed, and even …

    arkansas Repository record for Modeling and Characterization of P-Type Silicon Carbide Gate Turn off Thyristors (opens in a new tab)

  11. Power router based on a fractionally-rated back-to-back (FR-BTB) converter

    A low-cost power router (PR), capable of dynamic, independent control of active- and reactive-power flows on meshed grids is presented. The operating principle, detailed schematics, and various possible implementations of the proposed power router are discussed. Various operating modes are …

    gatech Repository record for Power router based on a fractionally-rated back-to-back (FR-BTB) converter (opens in a new tab)

  12. ANALYSIS, OPTIMIZATION AND CONTROL OF GRID-INTERFACED MATRIX-BASED ISOLATED AC-DC CONVERTERS

    … experimentally obtained efficiency (η) of 96.6%, power density (ρ) of 2.49 kW/L, UPF operation and near full-cycle ZVS of all SiC-MOSFETs over a wide load-range (12-100%). Thirdly, a machine-learning (ML) aided η–ρ optimal Solid-State-Transformer (SST) design framework is proposed and …

    nus Repository record for ANALYSIS, OPTIMIZATION AND CONTROL OF GRID-INTERFACED MATRIX-BASED ISOLATED AC-DC CONVERTERS (opens in a new tab) Download file for ANALYSIS, OPTIMIZATION AND CONTROL OF GRID-INTERFACED MATRIX-BASED ISOLATED AC-DC CONVERTERS (opens in a new tab)

  13. Modeling and Control of Wind Generation and Its HVDC Delivery System

    … to remote ac grids through HVDC, active power balance between DFIG-based wind farm and HVDC delivery needs to be obtained. In other words, the power delivered through HVDC should balance the varying wind power extracted from the wind farm. Therefore, control methods of DFIG and HVDC are …

    usf Repository record for Modeling and Control of Wind Generation and Its HVDC Delivery System (opens in a new tab)

  14. Design challenges and CAD solutions for low power and reliable monolithic 3D ICs

    The major challenges in low power and reliable monolithic 3D IC design are studied and quantified. New CAD solutions are developed to address these challenges and obtain maximum benefits from emerging monolithic 3D IC technology. The key design challenges in monolithic 3D ICs covered in this …

    gatech Repository record for Design challenges and CAD solutions for low power and reliable monolithic 3D ICs (opens in a new tab)

  15. Multiagent approach for power system reconfiguration

    … an agent based reconfiguration algorithm for power system application with termination detection and to provide communication architecture for these agents. The underlying maximum flow algorithm based on graph theory has proven the concept of autonomous distributed reconfiguration using …

    wvu Repository record for Multiagent approach for power system reconfiguration (opens in a new tab)

  16. Planar Leaky-Wave Antennas and Microwave Circuits by Practical Surface Wave Launching

    … be bound and guided for field channeling and power routing. For instance, novel planar metallic SW lenses and guidance structures are developed. Demonstrated applications include couplers, transition sections, as well as new planar circuits for power dividing/combining. To the author's …

    queens Repository record for Planar Leaky-Wave Antennas and Microwave Circuits by Practical Surface Wave Launching (opens in a new tab)

  17. Voltage and Timing Adaptation for Variation and Aging Tolerance in Nanometer VLSI Circuits

    … aging continue to be main challenges to the power-efficiency of VLSI circuits, as considerable power budget must be allocated at design time to mitigate timing variations. Modern designs incorporate adaptive techniques for variation compensation to reduce the extra power consumption. The …

    tamu Repository record for Voltage and Timing Adaptation for Variation and Aging Tolerance in Nanometer VLSI Circuits (opens in a new tab)

  18. RELAY DEPLOYMENT AND SELECTION IN COOPERATIVE WIRELESS NETWORKS

    … efficiency, reduce the end-to-end transmission power needed to achieve a desired network throughput, maximize the lifetime of a given network, rebuild a disconnected network, and mitigate the effect of channel estimation error and co-channel interference (CCI) problems. Conventional cooperative …

    maryland Repository record for RELAY DEPLOYMENT AND SELECTION IN COOPERATIVE WIRELESS NETWORKS (opens in a new tab)

  19. A testbed implementation of energy efficient wireless sensor network routing protocols

    … Since multi-hop communication takes place, the routing protocol used may have a significant effect on the balanced use and preservation of energy in the WSN. A significant amount of research has been performed on energy efficient routing in WSNs, but the majority of these studies were only …

    nwu-za Repository record for A testbed implementation of energy efficient wireless sensor network routing protocols (opens in a new tab)

  20. A Double-Sided Stack Low-Inductance Wire-Bondless SiC Power Module with a Ceramic Interposer

    … a novel three-dimensional (3-D) wire bondless power module package for silicon carbide (SiC) power devices to achieve a low parasitic inductance and an improved thermal performance. A half-bridge module consisting of 900-V SiC MOSFETs is realized to minimize stray parasitic inductance as well …

    arkansas Repository record for A Double-Sided Stack Low-Inductance Wire-Bondless SiC Power Module with a Ceramic Interposer (opens in a new tab)

Page 1 of 2