Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 130 for “"Power device"”.

  1. CMOS Power Device Modeling and Amplifier Circuits

    A power amplifier (PA) is a key part of the RF front-end in transmitters for a local broadband network. Today, commercial PAs are made of III-V HEMT and HBT technology with excellent results. An integrated system-on-chip power amplifier circuit using CMOS technology for cost-effective and …

    uiuc Repository record for CMOS Power Device Modeling and Amplifier Circuits (opens in a new tab)

  2. Modeling and Characterization of Metal/SiC Interface for Power Device Application

    … be an excellent material for the fabrication of power devices able to operate in extreme environmental conditions. Its superior properties such as wide energy bandgap, high hardness, chemical inertness, high electrical field breakdown strength and high thermal conductivity enable electronic …

    poli-torino Repository record for Modeling and Characterization of Metal/SiC Interface for Power Device Application (opens in a new tab)

  3. The high power device tester addition to CASS : a life cycle cost analysis

    … evaluation of the proposed acquisition of a High Power Device Tester (HPDT) to increase the capabilities of the Consolidated Automated Support System (CASS). It develops a LCC model for HPDT and the applicable existing ATE. The LCC model results are compared and evaluated for performance based on …

    nps Repository record for The high power device tester addition to CASS : a life cycle cost analysis (opens in a new tab)

  4. Gallium nitride selective area growth and heteroepitaxy via PAMBE for power device applications

    Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2026-12-01

    uiuc Repository record for Gallium nitride selective area growth and heteroepitaxy via PAMBE for power device applications (opens in a new tab)

  5. Digital Control for Switched Mode Power Supplies with Improved Power Device Behaviour and Reconfigurable Functionalities

    … gate drive technique (and other intelligent power module control techniques), an embedded stack based processor is developed. This processor is implemented in TSMCs 0.18 μm BCD Gen-2 process on the same die as a segmented gate driver. The compact design of the SPRUCE (Stack Processing Unit …

    toronto-retro Repository record for Digital Control for Switched Mode Power Supplies with Improved Power Device Behaviour and Reconfigurable Functionalities (opens in a new tab)

  6. A Suite of Fast and Efficient Cryptographic Mechanisms for Wireless Ultra-Low Power Device Networks

    … applications. Recent advances in the ultra-low power technologies enabled the development of even smaller, more mobile, autonomous devices. Wireless Sensor Networks (WSNs), Smart Dust, and Radio Frequency Identification (RFID) are several examples of this trend and have been applied to a large …

    regina Repository record for A Suite of Fast and Efficient Cryptographic Mechanisms for Wireless Ultra-Low Power Device Networks (opens in a new tab) Download PDF for A Suite of Fast and Efficient Cryptographic Mechanisms for Wireless Ultra-Low Power Device Networks (opens in a new tab)

  7. Thermal and thermo-mechanical performance of voided lead-free solder thermal interface materials for chip-scale packaged power device

    … to maximise thermal performance of electronic devices coupled with the continuing trends on miniaturization of electronic packages require innovative package designs for power devices and modules such as Electronic Control Unit (ECU). Chip scale packaging (CSP) technology offer promising …

    greenwich Download PDF for Thermal and thermo-mechanical performance of voided lead-free solder thermal interface materials for chip-scale packaged power device (opens in a new tab)

  8. Novel Design of Low Power Device for Measurement and Conversion of Continuous Cellular Pulse-Rate Signal to Optical for Potential Use in Implantable Devices

    Implantable devices have become increasingly commonplace as the technologies of electronic component manufacturing have allowed engineers to develop increasingly more capable devices at small scale. These devices are designed to survive the unique environment of the body. These design requirements …

    unr Repository record for Novel Design of Low Power Device for Measurement and Conversion of Continuous Cellular Pulse-Rate Signal to Optical for Potential Use in Implantable Devices (opens in a new tab)

  9. Characterization, Analysis, and Application of WBG Power Devices for Future Power Conversion Systems

    Semiconductor power devices are the most momentous constituents of any power converter system. Fast switching, compactness, high performance and efficiency, and high temperature operation are the exacting challenges experienced by conventional silicon (Si) power device based power converters in …

    denver Repository record for Characterization, Analysis, and Application of WBG Power Devices for Future Power Conversion Systems (opens in a new tab)

  10. Design and Analysis of a Fully-Integrated Resonant Gate Driver

    … Given the recent rapid growth in GaN HEMT power device applications for high-frequency power applications, research has been conducted in the power electronics field using resonant gate driving for GaN power devices. Previous research for resonant gate drivers for GaN HEMT devices mostly …

    utk-theses Repository record for Design and Analysis of a Fully-Integrated Resonant Gate Driver (opens in a new tab)

  11. All-SiC Three-Phase Converters for High Efficiency Applications

    … efficiency of three-phase converters using SiC power devices.The methodology to design a high efficiency all-SiC three-phase converter is presented. Four aspects are included: SiC power device evaluation, power loop parasitics analysis, high efficiency current source rectifier, and paralleled …

    utk-theses Repository record for All-SiC Three-Phase Converters for High Efficiency Applications (opens in a new tab)

  12. Analysis of silicon carbide based semiconductor power devices and their application in power factor correction

    … theoretical limits of the Si material; however, power device requirements for many applications are at a stage that the present Si-based power devices cannot handle. The requirements include higher blocking voltages, switching frequencies, efficiency, and reliability. Material technologies …

    tamu Repository record for Analysis of silicon carbide based semiconductor power devices and their application in power factor correction (opens in a new tab)

  13. Planar Packaging and Electrical Characterization of High Temperature SiC Power Electronic Devices

    … examines the packaging of high-temperature SiC power electronic devices. Current-voltage measurements were conducted on as-received and packaged SiC power devices. The planar structure was introduced and developed as a substitution for traditional wire-bonding vertical structure. The planar …

    vt Repository record for Planar Packaging and Electrical Characterization of High Temperature SiC Power Electronic Devices (opens in a new tab)

  14. Design and implementation of a low-power implantable cardiac monitoring device

    … cardiac studies in murine rodents, a small low-power device capable of performing these measurements is necessary. This thesis presents the design, implementation, and test of such a device, coupled with a radio that allows for the telemetry to be transmitted to a base station. Multiple …

    texas Repository record for Design and implementation of a low-power implantable cardiac monitoring device (opens in a new tab)

  15. Design and Evaluation of New Power Management Methods to Reduce Direct and Induced Energy Use of the Internet

    The amount of electricity consumed by devices connected to the Internet in the U.S. has rapidly increased and now amounts to over 2% of total electricity used, which is about 74 TWh/yr costing over $6 billion annually. This energy use can be categorized as direct and induced. Much of this energy …

    usf Repository record for Design and Evaluation of New Power Management Methods to Reduce Direct and Induced Energy Use of the Internet (opens in a new tab)

  16. The Development of Novel Interconnection Technologies for 3D Packaging of Wire Bondless Silicon Carbide Power Modules

    … 3D packaging and integration of silicon carbide power modules. 3D wire bondless approaches adopted for enhancing the performance of silicon power modules were surveyed, and their merits were assessed to serve as a vision for the future of SiC power packaging. Current efforts pursuing 3D wire …

    arkansas Repository record for The Development of Novel Interconnection Technologies for 3D Packaging of Wire Bondless Silicon Carbide Power Modules (opens in a new tab)

Page 1 of 7