Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"Power number"”.
-
Power requirements for agitation in fully baffled vertical cylinders
<p>The decrease in power number with increasing Reynolds number sought in this thesis was observed. However, the majority of the data is not an indication of this phenomenon. Only with a relatively high ratio of turbine diameter to vessel diameter could a power number fall-off be obtained. The …
-
A Systematic Method For Scaling Of Industrial Mixers
… to another tank, homogenizer shear rate and the number of turnovers are kept constant. The shear rate can be used to find the rotor speed of the homogenizer, which can then be used to calculate its flow rate at the working viscosity. The batch volume is divided into the flow rate to find the time …
-
Ball milling of non-Newtonian dispersions
… of a pigmented dispersion in a ball mill. A power-law fluid model was used to approximate the rheological behavior of the milled fluid. To correlate power data on each of 276 milled dispersions, this model was used together with power number, Reynolds number, Froude number; and some …
-
CFD methods for liquid mixing with the presence of a vortex. A comparative study of simulational methods with experimental validation
… a vortex. Through simulations and experiments, power number, pumping number, and mixing time are determined and analysed. This is done at different operational conditions with and without a vortex. The stirred tank is simulated both as steady state and with the free surface fixed and as unsteady …
-
Power dissipation and power correlations for a retreatblade impeller under different baffling conditions
… impeller clearance from the vessel bottom. The power, P, dissipated by the impeller is a critical process parameter to mixing processes to achieve the desired mixing effect, especially since the power per unit volume, P/V, directly controls mass transfer processes and other mixing phenomena. …
-
Simulation-based Design of Bioreactors Using Computational Multiphysics
… absence of impeller motion, and 2) the computed power number of the impeller. The validation showed an overestimation of the hindered settling velocity and an underestimation of the impeller power number.
-
Power consumption in horizontal cylindrical tanks
<p>The general correlation of Power Number vs. Reynolds Number for flat six blade turbines in a horizontal cylindrical tank without baffles has been determined. The correlation has been found to apply to this system and corresponds to the 4 - 10% baffle region in the vertical cylindrical tank as …
-
Influence of Flow Characteristics on the Kinetics of Spherical Agglomeration: An Experimental and Computational Analysis
… improving the ease of handling and reducing the number of downstream processing steps. Spherical agglomerates are formed by suspending particles in a solvent and adding an antisolvent to induce crystallisation. An immiscible bridging liquid is then added to the crystal suspension to form …
-
Liquid-liquid Dispersion in Batch and In-line Rotor-Stator Mixers
… regime was determined by reference to published Power number data and by qualitative differences in drop size data. Drop breakup in laminar flow was analyzed by comparison to published single drop breakup experiments in idealized flow fields. The breakup mechanism in laminar flow was similar to …
-
COMPOSITE PHOTOCATALYTIC MATERIALS FOR SOLAR ENERGY CONVERSION AND ENVIRONMENTAL APPLICATIONS
… as total pressure, O2 partial pressure, applied power, number of deposited layers, were investigated by means of photo-electrochemical techniques.
-
The influence of agitator type on fluid dynamics and oxygen mass transfer in a pilot scale mixing vessel
The power consumption (gassed and ungassed), bulk and local impeller fluid dynamics, gassed hold-up and oxygen mass transfer characteristics of a variety of industrially significant agitator types have been investigated using a pilot-scale mixing vessel. The purpose built perspex vessel of 0.72 m …
-
Investigation of Blend Time for Turbulent Newtonian Fluids in Stirred Tanks
… off-bottom distance, textbook values of impeller power number, and impeller rotational frequency.
-
Flow patterns and energy dissipation rates in batch rotor-stator mixers
… tended to move radially as free jets. The power number correlated well with the total flowrate and the total flowrate correlated well with the total hole area. Both power number and flowrate were practically not affected by hole shape, hole spacing and stator thickness. For all stators …
-
Single and multiphase mixing in partially filled stirred vessels
… hydrodynamics and related mixing phenomena. A number of experimental tools were used to analyze the systems under investigation, including: Particle Image Velocimetry (PIV) for the experimental determination of the velocity profiles, and after the appropriate data manipulation, the impeller …
-
Modelling Stirred Suspension Bioreactors for Scalable Expansion of Pluripotent Stem Cells
… shear stress, turbulent energy dissipation rate, power number, and turbulent power ratio are all significantly affected by the difference in viscosity models. Further, volume average turbulent energy dissipation rate from CFD studies with non-Newtonian viscosity was used to successfully maintain …
-
Investigating The Wettability Alteration Impact On The Oil Recovery Via Chemical Flooding And On Oil Filtration Using The Lattice Boltzmann Method
… inside the channel. An increase in the power number and an improvement in the suspended fluid transportation can be achieved by adding surfactants at specific conditions. A higher power number is associated with a reduction in consumed pumping power and an increase amount of useful work …
-
Power characteristics of disc type agitator impellers
<p>Experiments were conducted to determine the power required to drive disc type agitators and to observe the flowpattern and type of agitation produced in a baffled tank.</p><p>Power was measured by determining electrical energy input to a motor and subtracting motor transmission and friction …
-
Modeling and Simulation of Large Scale Stirred Tank
… evaluate the structure of the flow field and the power demand of the agitator. The results from the numerical models were compared with empirical data collected from these pilot plants that had been operated at an earlier date.Mixing is commonly used in a variety ways throughout industry to blend …
-
On low consistency refining of mechanical pulps
… after refining with a variety of pulp types, net-powers, feed flow rates, angular velocities and plate geometries was analyzed. Fibres' cutting rate and cutting location were found to be highly correlated with refiner gap. Plate geometry was also demonstrated to have a role in the fibre cutting …
-
The effects of tank size and impeller type on turbulent flocculation
… represents the dimensionless impeller power number. $\rm N\sb{p}\ \sp{0.5}$ND represents the magnitude of the rms fluctuating velocity in a region where the turbulent flow is anisotropic. These turbulence results suggest that G$\rm\sb{m}$ does not adequately describe the turbulence …
Page 1 of 2