Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 41 for “"Power transistor"”.

  1. High frequency power transistor model

    The development of a large-signal power transistor model applicable at radio frequencies is described. This model which has its basis in the classical large-signal models is valid for cut-off and active region operation but does not include saturation operation. The model is intended primarily for …

    auckland-ms Repository record for High frequency power transistor model (opens in a new tab)

  2. High-frequency, high-power transistor linear power amplifier design.

    … characteristics of high-frequency, high-power transistors, and why class B amplifiers are necessary for linear power amplification of signals containing more than one frequency. Linear power amplifier design is contingent upon having a suitable design technique. "Suitable" often means …

    nps Repository record for High-frequency, high-power transistor linear power amplifier design. (opens in a new tab)

  3. LDMOS Power Transistor Design and Evaluation using 2D and 3D Device Simulation

    … metal oxide semiconductor (LDMOS) transistors are investigated in this thesis using Sentaurus TCAD simulation software. Optimizations to the SJ LDMOS were attempted such as adding a buffer layer to the device, but simulation and theoretical evidence point out that the benefits of …

    ucf Repository record for LDMOS Power Transistor Design and Evaluation using 2D and 3D Device Simulation (opens in a new tab)

  4. Analysis of Power Transistor Behavioural Modeling Techniques Suitable for Narrow-band Power Amplifier Design

    The design of power amplifiers within a circuit simulator requires a good non-linear model that accurately predicts the electormagnetic behaviour of the power transistor. In recent years, a certain class of large signal frequency-dependent black-box behavioural modeling techniques known as …

    waterloo Repository record for Analysis of Power Transistor Behavioural Modeling Techniques Suitable for Narrow-band Power Amplifier Design (opens in a new tab)

  5. A Smart Gate Driver IC for Enhancement Mode GaN Power Transistor with Dead-time Correction

    Researchers in power electronics have been optimizing silicon devices with novel structures and gate drivers to keep up with the growing demands for power management. However, the improvement has slowed down as silicon power devices approach their theoretical limits. The emergence of GaN power …

    toronto-retro Repository record for A Smart Gate Driver IC for Enhancement Mode GaN Power Transistor with Dead-time Correction (opens in a new tab)

  6. Design and Optimization of Superjunction Vertical DMOS Power Transistors using Sentaurus Device Simulation

    … metal oxide semiconductor (VDMOS) power transistor has been studied. The use of superjunction (SJ) in the drift region of VDMOS has been evaluated using three-dimensional device simulation. All relevant physical models in Sentaurus are turned on. The VDMOS device doping profile is …

    ucf Repository record for Design and Optimization of Superjunction Vertical DMOS Power Transistors using Sentaurus Device Simulation (opens in a new tab)

  7. On Nonlinear Time-Invariant Behavioural Models of Power Transistors Used in the Computer-Aided Design of Power Amplifiers

    The Radio Frequency (RF) Power Amplifier (PA) is the main consumer of power in a wireless transmitter. Energy efficient PA design aided with circuit simulation tools requires accurate nonlinear models of the power transistors that lie at the heart of the PAs. This thesis proposes a novel …

    waterloo Repository record for On Nonlinear Time-Invariant Behavioural Models of Power Transistors Used in the Computer-Aided Design of Power Amplifiers (opens in a new tab)

  8. Pentateq: Acompany Aimed at Producing a Product that Reduces the Cost of Manufacturing Electric Vehicles and Paves the Way for Cost-Efficient Green Energy (Patent Pending)

    … logic gates with a programmable computer and the transistor array with a power transistor. The industrial power transistor is a single high-capacity transistor that can offer the same current and voltage capacities as an array of transistors in a single device and at a reduced cost. Incorporating …

    unr Repository record for Pentateq: Acompany Aimed at Producing a Product that Reduces the Cost of Manufacturing Electric Vehicles and Paves the Way for Cost-Efficient Green Energy (Patent Pending) (opens in a new tab)

  9. Safe Thermal Operation of Power Transistors Under Pulsed Excitation

    … and such factors as temperature within the transistor, power dissipation in the transistor junctions, collector saturation current, and thermal resistance. In the approach set forth in this paper, the theory of solid state heat flow is applied to a simplified thermal model of a power …

    unm Repository record for Safe Thermal Operation of Power Transistors Under Pulsed Excitation (opens in a new tab)

  10. The Rating of a Power Type Transistor

    … pulse ratings for the type of CTP-1003 (Clevite Transistor Products) power transistors under typical operating conditions. The manufacturer's specifications for the type of CTP-1003 power transistor are located in Appendix A.

    unm Repository record for The Rating of a Power Type Transistor (opens in a new tab)

  11. Video-bandwidth enhancement of RF power transistors through Volterra analysis

    … the causes of signal bandwidth limitations of RF Power Transistors and develop a methodology to improve this capability beyond that which can be achieved using PCB tuning techniques. An RF power transistor will be developed that can amplify a wide-band signal in Class AB and Doherty Architectures …

    gatech Repository record for Video-bandwidth enhancement of RF power transistors through Volterra analysis (opens in a new tab)

  12. Pulsed Power and Load-Pull Measurements for Microwave Transistors

    … Diffused Metal Oxide Semiconductor) and an LDMOS power transistor. The basic technique should also be useful for GaAs and GaN transistors with suitable consideration for the complexity added by trapping mechanisms present in those types of transistors.

    usf Repository record for Pulsed Power and Load-Pull Measurements for Microwave Transistors (opens in a new tab)

  13. NEGATIVE CAPACITANCE FERROELECTRIC MOSFET FOR LOW POWER CIRCUITS: POTENTIAL AND LIMITATIONS

    … ferroelectric MOSFET (FeFET) is a potential low power transistor beyond conventional MOSFET. Device- and circuit-level evaluations are presented to discuss its potential and limitations. NC in ferroelectric brings a beneficial effect of internal voltage amplification to FeFET, thus reducing its …

    nus Repository record for NEGATIVE CAPACITANCE FERROELECTRIC MOSFET FOR LOW POWER CIRCUITS: POTENTIAL AND LIMITATIONS (opens in a new tab) Download file for NEGATIVE CAPACITANCE FERROELECTRIC MOSFET FOR LOW POWER CIRCUITS: POTENTIAL AND LIMITATIONS (opens in a new tab)

  14. Class F And Inverse Class F Power Amplifier Subject To Electrical Stress Effect

    … investigated the Class F and inverse Class F RF power amplifier operating at 5.8 GHz. The major challenging issue in design and implementation of CMOS power transistor is the breakdown voltage especially in sub-micron CMOS technologies. In order to eliminate this problem a Cascode topologies were …

    ucf Repository record for Class F And Inverse Class F Power Amplifier Subject To Electrical Stress Effect (opens in a new tab)

  15. A FEASIBILITY STUDY OF HIGH-VOLTAGE COMPARATORS USING SILICON METAL-OXIDE-SEMICONDUCTOR FIELD-EFFECT TRANSISTORS

    The overall trend of transistor scaling has resulted in distinct, application-specific manufacturing processes. Two of these specialized devices scaled complementary metal-oxide-semiconductor field-effect transistors (CMOS) and power transistors, typically have inversely related performance in …

    gatech Repository record for A FEASIBILITY STUDY OF HIGH-VOLTAGE COMPARATORS USING SILICON METAL-OXIDE-SEMICONDUCTOR FIELD-EFFECT TRANSISTORS (opens in a new tab)

  16. Time domain device modeling of High Frequency Power MOSFETs

    The development of the High Frequency Power MOSFET has brought about a need for accurate models. Now that the frequency range of these MOSFETs is in domains where typically scattering parameter measurements are used, a broad band device model can prove to be extremely useful. This thesis summarizes …

    vt Repository record for Time domain device modeling of High Frequency Power MOSFETs (opens in a new tab)

  17. Design, analysis and test of a DC servomechanism utilizing direct drive

    … in the current state of the art in regard to power amplification. Although well-known for many years, the absence of a suitable DC power amplifier greatly restricts the use of equipment of this type. It is felt that the development of the power transistor will alleviate this problem. The …

    nps Repository record for Design, analysis and test of a DC servomechanism utilizing direct drive (opens in a new tab)

  18. High power, reflection tolerant RF solid state amplifier design

    … amplifier. Accelerator cavities also require power levels in the 2 - 8 kW range, which is significantly above what a single solid state power transistor can handle.Amplifier components discussed include pallet amplifiers, along with low pass filter circuits, circulators, and power combiner …

    msu Repository record for High power, reflection tolerant RF solid state amplifier design (opens in a new tab)

  19. VHF bipolar transistor power amplifiers: measurement, modeling, and design

    Widely used design techniques for radio frequency power amplifiers yield results which are approximate; the initial design is usually refined by applying trial-and-error procedures in the laboratory. More accurate design techniques are complicated in their application and have not gained acceptance …

    vt Repository record for VHF bipolar transistor power amplifiers: measurement, modeling, and design (opens in a new tab)

  20. Impedance Matching Networks for Wireless Applications

    Impedance matching implies maximum power transfer from source to load as well as minimum signal reflection from the load, in an RF system. This explains the importance of impedance matching networks and their continuously increasing use in many electronic applications, as for example RF power …

    waterloo Repository record for Impedance Matching Networks for Wireless Applications (opens in a new tab)

Page 1 of 3