Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"Powered Lift"”.

  1. Computational and Experimental Comparison of a Powered Lift, Upper Surface Blowing Configuration

    … typical results show a relationship between lift coefficient, CL, vs blowing momentum coefficient, Cμ. CFD analysis tend to over-predict values of CL due to gridding issues and/or turbulence model selection. This thesis attempted to address both issues by performing Richardson’s Extrpolation …

    calpoly Repository record for Computational and Experimental Comparison of a Powered Lift, Upper Surface Blowing Configuration (opens in a new tab)

  2. The V-γ performance method as applied to the Ball-Bartoe jetwing STOL aircraft

    … the performance of airplanes which employ powered-lift requires unique methods of flight testing and data reduction. The purpose of this study was to (1) show why the theory of conventional jet airplane performance is inadequate for powered-lift airplanes, (2) present a method by which the …

    ut-knoxville Repository record for The V-γ performance method as applied to the Ball-Bartoe jetwing STOL aircraft (opens in a new tab)

  3. Aerodynamic performance of the winged helicopter applying upper surface blowing

    <p>Powered-lift technology applied to vertical takeoff and landing aircraft can generate high lift coefficients. The determination of how this high lift capability can be utilized to improve rotary-wing aircraft performance, and thereby unload the rotor, is obtained by estimating the amount of …

    ut-knoxville Repository record for Aerodynamic performance of the winged helicopter applying upper surface blowing (opens in a new tab)

  4. A study of the flow field about an upper surface blown wing and its effects on longitudinal static stability of a small jet airplane

    <p>The effects of powered lift technology on the longitudinal stability characteristics of an upper surface blown (USB) jet-flapped aircraft have been studied. Both theoretical and experimental methods were employed to investigate the flow field in the vicinity of the lifting wing and its influence …

    utk-theses Repository record for A study of the flow field about an upper surface blown wing and its effects on longitudinal static stability of a small jet airplane (opens in a new tab)

  5. Application of powered high lift systems to STOL aircraft design

    … over a thirty year period was reviewed. Various powered-lift concepts were explored and recent application analyzed. The ACSYNT computer program, developed by the NASA Ames Research Center, was used to predict the takeoff performance of a proposed jet STOL transport utilizing the Lockheed AIBF …

    nps Repository record for Application of powered high lift systems to STOL aircraft design (opens in a new tab)

  6. A Proposed Solution to the Longitudinal Instabilities of the Ball-Bartoe Jetwing Through the Addition of a Thin, Fixed Slat to the Horizontal Tail

    … demonstrator vehicle employing single engine powered lift by means of upper surface blowing. Unfortunately, the aircraft has been plagued by longitudinal instabilities since the first flight. These instabilities have prevented an exploration of the full STOL potential of the aircraft since the …

    ut-knoxville Repository record for A Proposed Solution to the Longitudinal Instabilities of the Ball-Bartoe Jetwing Through the Addition of a Thin, Fixed Slat to the Horizontal Tail (opens in a new tab)

  7. CFD As Applied to the Design of Short Takeoff and Landing Vehicles Using Circulation Control

    … field length (BFL), often leads to the use of a powered lift technique such as circulation control (CC). Although CC has been around for many years, it has never been used on a production aircraft. This is in part due to the lack of knowledge as to how well CC can actually perform as a high lift …

    calpoly Repository record for CFD As Applied to the Design of Short Takeoff and Landing Vehicles Using Circulation Control (opens in a new tab)

  8. A Conceptual Design Methodology for Predicting the Aerodynamics of Upper Surface Blowing on Airfoils and Wings

    One of the most promising powered-lift concepts is Upper Surface Blowing (USB), where the engines are placed above the wing and the engine exhaust jet becomes attached to the upper surface. The jet thrust can then be vectored by use of the trailing edge curvature since the jet flow tends to remain …

    vt Repository record for A Conceptual Design Methodology for Predicting the Aerodynamics of Upper Surface Blowing on Airfoils and Wings (opens in a new tab)

  9. Reformulated Vortex Particle Method and Meshless Large Eddy Simulation of Multirotor Aircraft

    … is simulated mid maneuver as it transitions from powered lift to wing-borne flight, featuring rotors with variable RPM and variable pitch, tilting of wings and rotors, and significant rotor-rotor and rotor-wing interactions from hover to cruise. Thus, the reformulated VPM provides aircraft …

    byu Repository record for Reformulated Vortex Particle Method and Meshless Large Eddy Simulation of Multirotor Aircraft (opens in a new tab) Download PDF for Reformulated Vortex Particle Method and Meshless Large Eddy Simulation of Multirotor Aircraft (opens in a new tab)

  10. Aero-propulsive characteristics of an overwing distributed electric propulsion system with vectored thrust

    … force due to an increase in circulation-based lift and direct thrust force. At low thrust deflection angles, increases in stream-normal forces were also observed, alongside significant amounts of forward thrust, with an increased fan tip speed ratio. At a given nozzle deflection angle and fan …

    uiuc Repository record for Aero-propulsive characteristics of an overwing distributed electric propulsion system with vectored thrust (opens in a new tab)

  11. Jet/Wall Interaction: An Experimental Study with Applications to VSTOL Aircraft Ground Effects

    … initiate the take-off operation due to the high lift loss encountered while the airframe is in proximity to the ground. Therefore, jet-height-to-diameter ratios of 2 and 4 were employed in this study. Jet-to-free-stream velocity ratios of 0.12, 0.18 and 0.22 were employed in addition to the …

    vt Repository record for Jet/Wall Interaction: An Experimental Study with Applications to VSTOL Aircraft Ground Effects (opens in a new tab)

  12. Computer Based Modeling for Small e-VTOL Propeller Performance

    The emerging field of urban air mobility (UAM) offers a novel transportation method for civil, commercial, and military applications. Vertical take-off and landing (VTOL) configurations present challenges for performance prediction during crucial flight operations. An advanced computational …

    odu Repository record for Computer Based Modeling for Small e-VTOL Propeller Performance (opens in a new tab)