Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 63 for “"Pre-Oxidation"”.

  1. Atmospheric alkaline pre-oxidation of refractory sulphide gold ores

    … to conventional cyanidation to leach gold. This pre-treatment consisted of bubbling air into an ore/water mixture for eight hours while adding enough caustic sodium hydroxide to maintain a pH of 11 throughout the test. Three physical parameters were studied: total consumption of sodium hydroxide, …

    ubc Repository record for Atmospheric alkaline pre-oxidation of refractory sulphide gold ores (opens in a new tab) Download PDF for Atmospheric alkaline pre-oxidation of refractory sulphide gold ores (opens in a new tab)

  2. Colorimetric sensor arrays with a pre-oxidation method for gaseous analytes

    … To improve the array response, a disposable pre-oxidation technique has been developed in which a vapor stream is passed through an oxidation tube in front of the array. Oxidation byproducts (e.g., carboxylic acids, phenols, aldehydes, etc.) are reactive species that can be easily detected. …

    uiuc Repository record for Colorimetric sensor arrays with a pre-oxidation method for gaseous analytes (opens in a new tab)

  3. Ultraviolet Irradiation Combined with Chlorine Dioxide Pre-oxidation For Disinfection By-product Control

    … light and chlorine dioxide (ClO2) as an advanced oxidation process (AOP) has been investigated at the bench-scale to understand the effects of their use on disinfection by-product (DBP) formation potential (FP) in chlorinated groundwater (GW) and surface water (SW) supplies. Two GWs and two SWs of …

    ucf Repository record for Ultraviolet Irradiation Combined with Chlorine Dioxide Pre-oxidation For Disinfection By-product Control (opens in a new tab)

  4. Flotation Investigations on Ni-Cu Sulphide Ores With Pyrrhotite, Talc and Pre-Oxidation Issues

    … posing serious processing issues. This thesis represents an experimental investigation of the fundamental characteristics and flotation of two Ni-Cu sulphide samples, namely, an oxidized ore blend and a fresh ore blend. Bench-scale flotation tests were conducted to better understand the effects …

    queens Repository record for Flotation Investigations on Ni-Cu Sulphide Ores With Pyrrhotite, Talc and Pre-Oxidation Issues (opens in a new tab)

  5. Assessing Disinfection Byproduct Risks for Algal Impacted Surface Waters and Effects of Peracetic Acid Pre-Oxidation

    … waters and the effects of peracetic acid (PAA) pre-oxidation on DBP risks. Field samples from three eutrophic lakes were collected over a 13-week period during the algal bloom season. The formation of 11 DBPs (four trihalomethanes, four haloacetonitriles, two haloketones, and …

    buffalo Repository record for Assessing Disinfection Byproduct Risks for Algal Impacted Surface Waters and Effects of Peracetic Acid Pre-Oxidation (opens in a new tab)

  6. Oxidation Of Nickel And Nickel-Phosphorous Coated Aisi 430 Alloy: Effects Of Pre-Oxidation And Pre-Reduction

    … Application of protective coatings can mitigate oxidation and form a resistant layer over the chromia. In this study, the electroless and electrolytic deposition methods were used to obtain uniform deposition despite substrate geometry. The nickel coating was selected based on its satisfactory …

    uab Repository record for Oxidation Of Nickel And Nickel-Phosphorous Coated Aisi 430 Alloy: Effects Of Pre-Oxidation And Pre-Reduction (opens in a new tab)

  7. Effect of Pre-Oxidation and Thermal Exposure on the Microstructure of Superalloys and Thermal Barrier Coating Systems

    … superalloy René N5. The René N5 samples were pre-oxidized at 1150°C in atmosphere in order to form an α-Al2O3 layer to enhance bonding to the YSZ top coat. YSZ dense vertically cracked (DVC) and columnar morphologies were then applied. These samples were then cyclically and isothermally tested …

    carleton Repository record for Effect of Pre-Oxidation and Thermal Exposure on the Microstructure of Superalloys and Thermal Barrier Coating Systems (opens in a new tab)

  8. The Effect of Pre-Oxidation on the Corrosion Performance of Haynes 214 in Molten Chloride Salt Mixtures

    … reduce the lifespans of these systems. Pre-oxidation of Al2O3-forming alloys has been proposed as a strategy to mitigate corrosion. In this work, the corrosion resistance of Haynes 214, an Al2O3-forming alloy, is evaluated by comparing samples with a uniform pre-oxidized Al₂O₃ layer to …

    mcmaster Repository record for The Effect of Pre-Oxidation on the Corrosion Performance of Haynes 214 in Molten Chloride Salt Mixtures (opens in a new tab)

  9. Assessing the Effect of Pre-Oxidation at Different Stages of Water Treatment to Limit N-Nitrosodimethylamine (NDMA) Formation

    … Identifying and eliminating the sources of NDMA precursors in watersheds may prove to be too difficult in most cases. Hence, pre-oxidation with ozone, ozone/hydrogen peroxide (so-called advanced oxidation), or free chlorine was explored for precursor destruction to limit subsequent NDMA formation …

    umn Repository record for Assessing the Effect of Pre-Oxidation at Different Stages of Water Treatment to Limit N-Nitrosodimethylamine (NDMA) Formation (opens in a new tab)

  10. The kinetics of pyrite and elemental sulfur reactions during nitric acid pre-oxidation of refractory gold ores / by James R. Flatt.

    … attention is paid to the formation and oxidation of elemental sulfur. The study aims to elucidate the chemistry of the sulfide oxidation and of elemental sulfur formation and oxidation.

    adelaide Repository record for The kinetics of pyrite and elemental sulfur reactions during nitric acid pre-oxidation of refractory gold ores / by James R. Flatt. (opens in a new tab)

  11. Pre-oxidation and adsorption with powdered activated carbon for taste and odor control and optimizing coagulation for dissolved organic carbon removal

    … of the source waters efficiently with PAC. Preliminary testing was conducted on Lake Loveland and Boyd Lake water with an incremental alum dosage from 30 to 70 mg/L followed by three five minute stages of flocculation and 45 minutes settling time. Turbidity, TOC and DOC were measured before …

    colostate Repository record for Pre-oxidation and adsorption with powdered activated carbon for taste and odor control and optimizing coagulation for dissolved organic carbon removal (opens in a new tab)

  12. Application of Advanced Oxidation Process as a Pre-Oxidation Step for Spent Lettuce Wash Water and for Decontaminating Fruit and Sliced Mushrooms

    … treating wastewater in a process termed Advanced Oxidation Process (AOP). The following thesis developed, validated and verified radical treatments for treating spent wash water and for decontaminating fruit and mushrooms. Both treatments resulted in a >2 log CFU reduction of L. monocytogenes …

    guelph Repository record for Application of Advanced Oxidation Process as a Pre-Oxidation Step for Spent Lettuce Wash Water and for Decontaminating Fruit and Sliced Mushrooms (opens in a new tab)

  13. Cermet composites based on MgO-recyclates and 316L stainless steel as carbon-free anodes for the Hall-Héroult-Process

    … focusing on the influence of processing and pre-oxidation on microstructure and functional properties. The composites exhibit a two-phase structure, with conductivity governed by the metallic network. Pre-oxidation alters phase composition and porosity, promoting oxide formation and …

    qucosa-diss

  14. Effects Of Bond Coat Surface Preparation On Thermal Cycling Lifetime And Failure Characteristics Of Thermal Barrier Coatings

    … as-sprayed, barrel-finished, hand-polished and pre-oxidation heat treatment at 1100[degrees]C in P=10O2-8 atm up to 4 hours, carried out prior to the electron beam physical vapor deposition (EB-PVD) of ZrO2-7wt% Y2O3 (7YSZ) ceramic topcoat. The resulting characteristics of the bond coat and the …

    ucf Repository record for Effects Of Bond Coat Surface Preparation On Thermal Cycling Lifetime And Failure Characteristics Of Thermal Barrier Coatings (opens in a new tab)

  15. Economic feasibility of a pre-oxidative process to enhance solid-state chromite reduction

    … increases in electricity prices have placed pressure on FeCr producers. The pelletised chromite pre-reduction process is most likely the FeCr production process with the lowest specific electricity consumption (SEC), i.e. MWh/ton FeCr, currently in operation. However, due to increases in …

    nwu-za Repository record for Economic feasibility of a pre-oxidative process to enhance solid-state chromite reduction (opens in a new tab)

  16. Ensaios de tratabilidade aplicados a determinação de parâmetros para dimensionamento de processos de tratamento de água de manancial eutrofizado

    Eutrophication is a growing process present in the water sources located in the northeast of Brazil. Among the main consequences of these changes in trophic levels of a water source, stands out adding complexity to the treatment to achieve water standards. By these considerations, this study aimed …

    brazil-ufrn Repository record for Ensaios de tratabilidade aplicados a determinação de parâmetros para dimensionamento de processos de tratamento de água de manancial eutrofizado (opens in a new tab)

  17. Bromide Removal from Surface Waters by Silver Impregnated Activated Carbon

    Bromide is a precursor of disinfection by-products (DBPs) during potable water treatment, because it causes the formation of brominated DBPs that are more cyto- and geno-toxic than their chlorinated analogues. Due to the potential health risks of DBPs, the United States Environmental Protection …

    clemson Repository record for Bromide Removal from Surface Waters by Silver Impregnated Activated Carbon (opens in a new tab)

  18. Adequação das condições operacionais de uma ETA “Convencional” que trata água com cor e turbidez baixas

    … "conventional") because should be coagulated preferably in adsorption-neutralization mechanism loads. Such water can be coagulated in the sweep mechanism, generally with a high dose of coagulant, to produce settleable flocs which are removed in the decanter. However, it is also possible, in an …

    brazil-ufrn Repository record for Adequação das condições operacionais de uma ETA “Convencional” que trata água com cor e turbidez baixas (opens in a new tab)

Page 1 of 4