Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 35 for “"Preheat temperature"”.

  1. Effects of preheat temperature and vitiation on reaction kinetics of higher hydrocarbon fuels

    … The experimental conditions include high preheat temperatures (up to 650 K) and reduced O2 levels (down to 15% mole fraction in the oxidizer); the latter is relevant to vitiation, where there is partial pre-burning of the oxidizing flow. Furthermore, vitiation introduces combustion …

    gatech Repository record for Effects of preheat temperature and vitiation on reaction kinetics of higher hydrocarbon fuels (opens in a new tab)

  2. Assessment and Analysis of Turbulent Flame Speed Measurements of Hydrogen-Containing Fuels

    … pressure data (up to 20 atm), and add data at preheat temperatures up to 500 K. The addition of this data is of great importance as it allows for further exploration of thermodynamic and fuel effects on ST,GC¬. The analysis of this database reveals several key findings. Firstly, regardless of …

    gatech Repository record for Assessment and Analysis of Turbulent Flame Speed Measurements of Hydrogen-Containing Fuels (opens in a new tab)

  3. Studies of rich and ultra-rich combustion for syngas production

    … potential and the second on the effect of preheat temperature. A primarily experimental investigation of the conversion of jet fuel and butanol to syngas was undertaken to understand the potential of these fuels for conversion. With these new data and previously-published experimental data, …

    texas Repository record for Studies of rich and ultra-rich combustion for syngas production (opens in a new tab)

  4. Experimental and numerical investigation of laminar flame speeds of H₂/CO/CO₂/N₂ mixtures

    … 100% H2 in the H2/CO fuel mixture; 2) 300-700 K preheat temperature; 3) 1 to 15 atm pressure, and 4) 0-70% dilution with CO2 or N2. The second objective of this thesis is to use the flame speed data to validate leading kinetic mechanisms for syngas combustion. Comparisons of the experimental …

    gatech Repository record for Experimental and numerical investigation of laminar flame speeds of H₂/CO/CO₂/N₂ mixtures (opens in a new tab)

  5. Welding of cast A359/SiC/10p metal matrix composites

    … Element Analysis (FEA) was used to predict the preheat temperature field across the weld and the weld pool temperature. Welding current, welding speed, and the preheat temperature (300-350??C) affected the weld quality significantly. It was seen that the fracture of the welded specimens was …

    tamu Repository record for Welding of cast A359/SiC/10p metal matrix composites (opens in a new tab)

  6. Simulation Analysis of Ceramic Shell Representation and Process Parameters in IN718 Investment Casting

    … around the ceramic shell, with focus on temperature history, heat-flux response, filling and solidification behaviour, shell representation and porosity-related defect indicators. The study treats the ceramic shell as part of the thermal system, rather than only as a geometric boundary, …

    chalmers Repository record for Simulation Analysis of Ceramic Shell Representation and Process Parameters in IN718 Investment Casting (opens in a new tab)

  7. Temperature Mould Maintenance during Automatic Welding

    … sensors, it is necessary to predict the temperature and the dilatation of the mould during the welding process. The mould to be welded is preheated to prevent excessive stress due to extreme temperature differences in the material. As well, it is necessary to maintain the temperature of …

    waterloo Repository record for Temperature Mould Maintenance during Automatic Welding (opens in a new tab)

  8. Plasma spraying low thermal expansion alumino-silicate glasses

    … refractory concrete substrates. Substrate temperatures were controlled such that the maximum surface temperature exceeded the crystallization temperature during plasma spraying. The surprising aspect of this study is that with increasing preheat temperature the structure of the plasma …

    must-thes Repository record for Plasma spraying low thermal expansion alumino-silicate glasses (opens in a new tab)

  9. Finite element analysis of thermal fields during repair welding of discrete rail defects

    … These operations typically require high preheat temperature (350 °C) and long working process times. This MSc-thesis work investigates a novel DDR rail welding procedure through numerical simulations. The new technique employs significantly lower preheat temperature (80 °C) and equipment …

    chalmers Repository record for Finite element analysis of thermal fields during repair welding of discrete rail defects (opens in a new tab)

  10. The Adhesion Strength of a Plasma Sprayed Silicon Bond Coating on a Silicon Carbide Ceramic Matrix Composite

    … formation. Surface roughness/texture, substrate preheat temperature and mean Si particle size were varied in plasma spray coating experiments to observe their role in coating adhesion strength. Si adhesion strength was found to be related to all three factors and a statistical model was developed …

    vt Repository record for The Adhesion Strength of a Plasma Sprayed Silicon Bond Coating on a Silicon Carbide Ceramic Matrix Composite (opens in a new tab)

  11. Investigation of Swirl Assisted Colorless Distributed Combustion (CDC) for Gas Turbine Application

    … of heat release intensity, equivalence ratio, preheat temperature and entrainment gas on distributed conditions. Lastly, the impact of flowfield interaction on achieving CDC condition will be examined for enhanced understanding of mixing required for CDC.

    maryland Repository record for Investigation of Swirl Assisted Colorless Distributed Combustion (CDC) for Gas Turbine Application (opens in a new tab)

  12. Roll bonding of metal-polymer-metal sandwich composites

    … parameters, which include surface roughness, preheat temperature, rolling speed, and total thickness reduction, on the adhesion strength have been investigated using the peel test. Mechanical interlocking was the primary adhesion mechanism in direct bonding of the aluminum and polyurethane. …

    iastate Repository record for Roll bonding of metal-polymer-metal sandwich composites (opens in a new tab)

  13. Combustion Synthesis And Characterization Of Porous Niti Intermetallic For Structural Application

    … investigated experimentally through varying the preheat temperature, initial porosity, initial elemental particle size, and applied pressure during the fabrication process. Ni and Ti elemental powders are mixed using a 1:1 ratio. The mixture is compressed using several different compression …

    ucf Repository record for Combustion Synthesis And Characterization Of Porous Niti Intermetallic For Structural Application (opens in a new tab)

  14. Pyrolysis oil combustion characteristics and exhaust emissions in a swirl-stabilized flame

    … air flowrates. Variation in combustion air preheat temperature from 100 to 400 yC, variation in water content from 23 to 26%, and variation in fuel fixed carbon content from 15 to 51% did not show significant effects on cenosphere characteristics.</p>

    iastate Repository record for Pyrolysis oil combustion characteristics and exhaust emissions in a swirl-stabilized flame (opens in a new tab)

  15. Lean blowout and its robust sensing in swirl combustors

    … combustors, i.e., elevated pressure and preheat temperature operation. To this end, two combustors were used: a gas-fueled, atmospheric pressure combustor that exhibits pronounced combustion dynamics under a wide range of lean conditions, and a low NOx emission liquid-fueled lean direct …

    gatech Repository record for Lean blowout and its robust sensing in swirl combustors (opens in a new tab)

  16. The suitability of coal-oil and other slurries as blast furnace tuyere injectants

    … of air velocity (typically 200 m/s) air preheat temperature (typically 1000°c) and oxygen enrichment (up to 26% oxygen content by volume) obtaining on a modern blast furnace.<br/><br/>The results from this rig were used to calibrate a mathematical model of the mixing and combustion …

    southwales Repository record for The suitability of coal-oil and other slurries as blast furnace tuyere injectants (opens in a new tab) Download PDF for The suitability of coal-oil and other slurries as blast furnace tuyere injectants (opens in a new tab)

  17. Investigation of alternative jet fuels in gas turbine combustion systems using x-ray radiography

    … over a range of fuel flow rates and inlet air preheat temperatures to establish the effect of various combustor conditions on the atomization and vaporization processes. The phase contrast imaging shows that atomization occurs much more rapidly at higher fuel flow rates and fuel pressures, and …

    uiuc Repository record for Investigation of alternative jet fuels in gas turbine combustion systems using x-ray radiography (opens in a new tab)

  18. Influence of Ultra-High Temperature Process Parameters on Age Gelation of Mille Concentrate

    … was to investigate the effect of ultra-high temperature process parameters on age gelation of milk concentrate. Skim milk was concentrated to 2X (volume reduction) using reverse osmosis. The milk concentrate was preheated at 75 or 90°C for 20 or 50 s and UHT-processed at 138 or 145°C for 4 or …

    utahstate Repository record for Influence of Ultra-High Temperature Process Parameters on Age Gelation of Mille Concentrate (opens in a new tab)

  19. Manufacture, Shelf Stability, and Acceptability of Aseptically Packaged, Unripened Soft Cheese Produced by Post-Ultra-High Temperature Acidulant Injection of Ultrafiltered Milk Concentrate

    … technologies of ultrafiltration and ultra-high temperature processing. Product evaluation included physical and chemical properties such as gel strength, syneresis, pH, moisture, protein, and fat. Whole milk was concentrated by ultrafiltration to 30, 35, and 40% total solids. Milk retentate was …

    utahstate Repository record for Manufacture, Shelf Stability, and Acceptability of Aseptically Packaged, Unripened Soft Cheese Produced by Post-Ultra-High Temperature Acidulant Injection of Ultrafiltered Milk Concentrate (opens in a new tab)

  20. Passive control of combustion noise and thermo-acoustic instability with porous inert media

    … NOx by allowing operation at reduced flame temperatures, LPM flames are particularly susceptible to combustion noise and instability. While combustion noise and thermo-acoustic instability are distinctly different phenomena; both originate from the same source ‒ unsteady heat release in a …

    alabama Repository record for Passive control of combustion noise and thermo-acoustic instability with porous inert media (opens in a new tab)

Page 1 of 2