Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"Preload force"”.

  1. An analysis of the effects of concrete properties on the loaded behavior of individual wedge bolt expansion anchors

    … tests to further define the loss of preload force in a wedge anchor were conducted.</p><p>The tests were performed on one brand of one-half inch wedge bolt expansion anchor. The same diameter of carbide-tipped drill bit was used for each anchor. Concrete slabs were cast with four …

    ut-knoxville Repository record for An analysis of the effects of concrete properties on the loaded behavior of individual wedge bolt expansion anchors (opens in a new tab)

  2. Motor simulation and parameter identification in a reciprocating mechanism

    … of mass, damping, spring stiffness, and preload force of the mechanism. The time domain data (e.g. the motor net input torque, the mechanism load torque, the angular velocity, and angular acceleration, etc.) of the mechanism from a simulation can be related through the use of Newton’s …

    vt Repository record for Motor simulation and parameter identification in a reciprocating mechanism (opens in a new tab)

  3. Static Load Bolted Joint Elastic Resilience Testing Methodology

    … resilience is the ratio of deformation over force an object experiences when under stress. Knowing the how much the bolt and clamped part deform under load is critical when determining fasteners for a bolted joint. VDI 2230 is the internationally recognized bolt sizing standard and contains …

    sdstate Repository record for Static Load Bolted Joint Elastic Resilience Testing Methodology (opens in a new tab)

  4. Synthetic Gecko Inspired Dry Adhesive Through Two-Photon Polymerization for Space Applications

    … micropillars toward the tilted direction when preload force is applied. The improved microstructure fabrication process could produce micropillars in the height of 270 μm with soft polymer without defects. However, the miniaturized micropillars in the height of 40 μm, frabricated with the same …

    embry-riddle Repository record for Synthetic Gecko Inspired Dry Adhesive Through Two-Photon Polymerization for Space Applications (opens in a new tab)

  5. An investigation into the characteristics and optimisation of a high-pressure common rail injection system

    … three more design parameters (the spring preload force (SPF), nozzle orifice number (NZN) and nozzle orifice diameter (NZD)) were involved in the optimisation process of the Type-II fuel injector under three different rail pressures (80 MPa, 120 MPa and 160 MPa).;The optimal design with …

    strathclyde Repository record for An investigation into the characteristics and optimisation of a high-pressure common rail injection system (opens in a new tab)

  6. Rotordynamics Analysis with a Hirth and Curvic Coupling: 3D Solid Finite Element and Efficient Beam Model

    … the couplings to transmit torque, moment, and force. However, the surface contacts in these couplings introduce non-beamlike behavior such as local lateral flexibility that affects natural frequencies, critical speeds, mode shapes, imbalance response, and vibration stability, making a …

    tamu Repository record for Rotordynamics Analysis with a Hirth and Curvic Coupling: 3D Solid Finite Element and Efficient Beam Model (opens in a new tab)

  7. Flow-Sound-Structure Interaction in Spring-Loaded Valves

    … other parameters such as initial spring preload force and valve plate area only had moderate effects on the stability behaviour of the valve. The second part of the investigation sought to develop a theoretical model that could simulate the valve’s response when subjected to air flow …

    mcmaster Repository record for Flow-Sound-Structure Interaction in Spring-Loaded Valves (opens in a new tab)

  8. Fabrication and characterization of biomimetic dry adhesives supported by foam backing material

    … material. Dependencies of the pull-off adhesive force and energy release rate on preload and foam thickness are systematically investigated through a series of axisymmetric indentation/de-bonding tests. The contribution of the foam backing layer to the overall compliance and adhesion is analysed …

    waterloo Repository record for Fabrication and characterization of biomimetic dry adhesives supported by foam backing material (opens in a new tab)

  9. Measurement and modelling of seating dynamics to predict seat transmissibility

    … vibration (1.5 to 15 Hz) with three static preloads and with three vibration magnitudes (0.25, 0.5, and 1.0 ms-2 r.m.s.). With the same deformation, the reaction force was greater during loading than during unloading, showing evidence of hysteresis. The stiffness increased with increasing …

    soton Download PDF for Measurement and modelling of seating dynamics to predict seat transmissibility (opens in a new tab)

  10. Analysis of the in-Flight Performance of a Critical Space Mechanism

    … not controllable by the electrostatic control force responsible for capturing the TM once released. Therefore, both the TMs collided with either the surrounding housing walls or the release mechanism end effectors. It was possible to start the science phase by manually controlling the release …

    trento Repository record for Analysis of the in-Flight Performance of a Critical Space Mechanism (opens in a new tab)

  11. Analysis of Capillary Forces in Electrowetting and Precision Self Assembly

    … and Electrowetting in microfluidics. Capillary forces are the most critical factor in both of these techniques and need proper characterization. This thesis describes a detailed study of these forces and explains how they were utilized as an effective source of drive in high end applications. …

    usf Repository record for Analysis of Capillary Forces in Electrowetting and Precision Self Assembly (opens in a new tab)

  12. Výpočtové modelování nízko-profilového odpružení segmentů ložisek

    Aerodynamické radiálne ložiská s naklápacími segmentami sú v súčasnosti jedným z najpoužívanejších typov ložísk v rotačných zariadeniach dosahujúcich vysoké otáčky. Aby bola zabezpečená lepšia stabilita rotoru pri náročných prevádzkových podmienkach prebieha výskum nového typu aerodynamických …

    brno-tech Repository record for Výpočtové modelování nízko-profilového odpružení segmentů ložisek (opens in a new tab)