Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 989 for “"Pressure Measurements"”.
-
Hydraulic ram pressure measurements.
… attempt was made to correlate these theoretical pressure predictions with experimental data obtained from 0.222 caliber projectiles impacting a small water-filled tank. This comparison showed reasonable correlation but indicates that more work must be done to permit predictions of hydraulic ram …
-
Vortex detection through pressure measurements
… using wind tunnel experiments, is studied for pressure variation using an array of pressure ports mounted over the plate and connected to suitable pressure sensors. Pressure coefficient and Velocity maps are generated using the data obtained from the Kirsten Wind Tunnel data acquisition system. …
-
Dynamic, In-Situ Pressure Measurements during CMP
… rotational setup for measuring interfacial fluid pressure and temperature was successfully constructed. Interfacial fluid measurements were performed with various slurries, slurry flow rates, and pad topographies. It was experimentally determined that the pad topography has the biggest effect in …
-
Simulation of swelling pressure measurements on expansive soils
… have been proposed to predict the swelling pressure and the amount of swell of an expansive soil. These methods generally involve the use of a one-dimensional consolidation apparatus (i.e., oedometer). A large amount of test results and experience involving these methods have been reported. …
-
Pressure measurements during one-sided heating of concrete
… The spalling may be caused by increasing vapor pressures in the pores of the concrete. The experiments discussed in this report are the first to combine temperature and pressure measurements with 1D-moisture profiles, during the heating of concrete. For this, cylindrical concrete (W/C=0.54) …
-
Oxygen Dissociation Pressure Measurements on Nonstoichiometric Cerium Dioxide
… in metal oxides as a function of oxygen partial pressure has been constructed, evaluated, and used to determine the oxygen partial pressure dependence of the deviation from stoichiometry in nonstoichiometric cerium dioxide at 800°C. The range of partial pressures covered in this study was from …
-
X -Ray and Pressure Measurements on Helium Solids
Lattice parameter data obtained from experiments at the National Synchrotron Light Source at the Brookhaven National Laboratory are also presented here. The vacancy formation energy of fcc 4He at 10.4 cm3 /mol was obtained by two different methods. In addition, c/a ratios were determined to be …
-
X-ray and pressure measurements on helium solids
Submitted by William Weathers (weathrs2@illinois.edu) on 2012-05-23T17:22:10Z No. of bitstreams: 1 1999_shah.pdf: 3556405 bytes, checksum: 4bf4fda965f37ef181d2d8ef80a56d87 (MD5)
-
Objective pressure measurements in two groups of laryngectomees
Thesis (Ph. D.)--Michigan State University. Department of Audiology and Speech Sciences, 1994
-
Characterization of Inflationary and Deflationary Auscultatory Blood Pressure Measurements
… to develop a novel method to measure blood pressure (BP). The introduction chapter describes how the documents are interrelated. This work starts with the description of the development and design of a non-invasive medical device capable of measuring arterial BP with a combination of …
-
Generalizability of Center of Pressure Measurements Across Age Populations
The reliability of common Center of Pressure (COP) measurements was systematically investigated. Studies on the control of posture during quiet standing using force platform data lack standardization in measurement protocols (especially trial length and number). Guidelines for methodology that met …
-
Surface pressure measurements on a rotating controlled diffusion blade
A method for quantifying fluctuating pressure magnitudes on the surface of a Controlled Diffusion (CD) blade was utilized to identify characteristics of the flow structure of the boundary layer at various streamwise and spanwise locations. This research effort explored the fundamental aspects of an …
-
Determining Multilayer Formation Properties from Transient Temperature and Pressure Measurements
… from production logs and transient rate and pressure measurements are required at multiple surface rates. Therefore, this method can be time consuming and may involve significant errors due to inaccurate transient flow rate measurements. A new testing approach is proposed after realizing the …
-
UNSTEADY PRESSURE MEASUREMENTS IN A SUPERSONIC INLET DURING UNSTART SIMULATIONS
Unsteady pressure behavior during inlet unstart is a critical factor in understanding the performance and stability of supersonic systems. This thesis will investigate the unsteady pressure measurements within a supersonic inlet during unstart. By using a model developed by Ben Nikaido, Kulites …
-
On atmospheric pressure measurements and dust devils on planet Mars
… atmosphere: to improve the quality of barometric pressure measurements and to study the effect of dust devils on the atmosphere using the pressure data. Accurate and traceable pressure measurements by several successive Mars landers also enable studying slow changes in the Martian climate. The …
Page 1 of 50